Herefordshire · England

Shower Tray Repair for Rowlestone homes

Shower tray repair across Rowlestone and nearby, typically in one visit and guaranteed for a year.

  • Repairs from £95
  • A tray that flexes
  • Chipped corners or rims
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted shower tray repair in Rowlestone

What affects the price in Rowlestone

Prices start from £95. A fixed quote means you know the cost before you book. We take into account:

  • The size and number of damaged areas
  • Whether old repairs or coatings need taking off
  • How easy the damage is to reach
  • What the surface is made of

A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.

How to get a fixed quote

A couple of clear pictures is all it takes. Try to include:

  • A close-up of the damage, in focus
  • Natural light rather than flash
  • The material, if you know it
  • Any earlier repairs or coatings

For a price in Rowlestone, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Shower tray repair in Rowlestone without replacing anything

In most cases, a damaged tray can be repaired where it is, from a chip by the waste to a crack across the base. The colour and finish are matched so the repair blends in. Whether it’s a tray that flexes and a crack across the base, we can help, on ceramic, cast iron and acrylic alike.

Big or small, it’s backed by a one-year guarantee.

Discoloured square shower tray restored with a new white finish
Area
Rowlestone (HR2)
County
Herefordshire
Cover
One year on every repair
Price
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Last updated
23 October 2026

What happens on the day

We work cleanly and quietly, so you can stay at home while we’re there. We protect the area first, then the job itself takes a few hours, or most of a day for a full resurface. At the end we talk you through how soon it can be used and how to look after it.

  1. We check the tray for movement first.
  2. We clean the damage and open it up so the repair can bond.
  3. Cracks are reinforced and the damage filled.
  4. We shape the repair, match the colour and finish it.
  5. We leave it to cure, normally until the following day.

Before we arrive

  • Tell us about any previous repairs or coatings
  • Tell us about parking, stairs or access
  • Have a window or extractor fan available

Getting a price

We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.

Get a free quote

Read more

Where we work around Rowlestone

Rowlestone is about 9 miles north-east of Abergavenny, in Herefordshire. Customers in Rowlestone get the same service as everywhere else we cover: a fixed quote from your pictures, and a technician at your door on the day. We cover 255 places in Herefordshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 57 miles away.

Every address in HR2 is covered, from the main roads to the quietest streets. Other places close to Rowlestone include Walterstone Common (2 miles west), Abbey Dore (3 miles north), Lower Maes-coed (3 miles north-west), Clodock (4 miles west) and Bacton (4 miles north). Further out, we also cover Hereford (11 miles north-east), Ross-on-Wye (14 miles east), Redhill (11 miles north-east), Newton Farm (10 miles north-east), Merrivale (14 miles east) and Whitecross (11 miles north-east).

What’s near Rowlestone

Our clients here include homes close to St James's Church, among other places. Well-known places in the area include Llancillo Castle (1.1 miles south-west). Green spaces nearby include Campston Hill and Ewyas Harold Meadows.

Map of Rowlestone © OpenStreetMap contributors

Rowlestone questions

Do you reseal the tray as well?

Yes, if you’d like us to. After a repair is a good time to reseal.

Do you charge for travel?

Travel is included in the price, with the same prices everywhere we work.

How do I book?

Just photos, your postcode and a contact number. On the day, access to the room.

Do you cover Rowlestone?

Yes. We work across the UK and travel to Rowlestone and the rest of Herefordshire. Send pictures and we will quote, or call 0345 017 0787.

Can you quote from photos?

In nearly every case. If pictures do not show enough, we’ll ask for another angle.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Is it messy?

We protect the room with dust sheets and masking first, and we clean up when we have finished.

How soon can you come?

Your quote comes with available dates. If it’s urgent, say so and we will do what we can.

When to call us in Rowlestone

Rigid trays don’t bend, they crack when they sit on an uneven or poorly supported floor. Timber floors that move can cause it too.

Contact us if you’ve noticed any of these:

  • Snagging damage in a new bathroom
  • A cracked shower tray
  • A damaged area around the waste
  • Scuffs and light scratches

What to look for in a quote

  • How your room will be protected
  • Aftercare advice
  • What happens if the damage is worse than the pictures show
  • Whether the price is fixed and includes VAT

10 questions to ask before booking

For landlords and businesses

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.

Looking after it afterwards

Nothing complicated is needed:

  • Check the seal every few months
  • Use a mild, non-abrasive cleaner
  • Avoid strong descalers and bleach
  • Use the extractor fan

Wait the full curing time before you shower. After that, gentle cleaning and good ventilation keep it in good shape.

If the tray creaks or moves, get it checked, before it cracks or gets worse.

Should I try a DIY kit first?

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

Different materials, different repairs

Ceramic

Ceramic trays are hard and glossy. They chip and crack from impact, and the repair is polished to match the shine.

Stone resin

Stone resin trays are rigid and slim. A flat, solid base is essential, and we match repairs to the surface finish.

What a repair cannot fix

Not everything can be repaired, and we’ll tell you before we start. Repairs won’t solve:

  • A tray that flexes because it was never properly supported
  • Trays cracked in several places
  • Water damage to the floor beneath the tray

Not sure? Send photos and we will give you a straight answer.

Surfaces we repair

  • Stone resin
  • Ceramic
  • Acrylic
  • Cast iron
  • Enamelled steel
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.