Perth and Kinross · Scotland
Shower Tray Repair for Rumbling Bridge homes
We travel to Rumbling Bridge for shower tray chip, crack and scratch repairs and resurfacing. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Scratches in the surface
- A cracked shower tray
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Store bottles off the tray
- Replace failing sealant promptly
- Ventilate the room after showers
- Clean with washing-up liquid and a soft cloth
Avoid abrasive pads and strong descalers. A soft cloth and washing-up liquid do the job.
Every shower forces a little water into a crack, and over months that can rot the floor. Getting it repaired quickly is much cheaper than fixing a floor.
Shower tray repair in Rumbling Bridge without replacing anything
You don’t always need a new tray. If it’s solid underneath, it can generally be repaired in place, saving you the cost and mess of a new one. Typical jobs include damage from a refit or building work and movement when you stand on it, across acrylic, enamelled steel and stone resin.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Where
- Rumbling Bridge (KY13)
- Region
- Perth and Kinross
- Guarantee
- 12 months on all our work
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Different materials, different repairs
Stone resin
Stone resin trays are popular because they’re rigid and low-profile. A flat, solid base is essential, and repairs are matched to the gel coat.
Enamelled steel
Steel trays have an enamel surface like a steel bath. Exposed metal can rust, so it’s worth repairing early.
Towns and villages near Rumbling Bridge
What else we do in Rumbling Bridge
Rumbling Bridge and nearby
Rumbling Bridge is about 9 miles north-east of Alloa, in Perth and Kinross. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We cover all 107 towns and villages across Perth and Kinross. We work right across the region, from Rumbling Bridge to Edinburgh (about 22 miles away).
All of KY13 is within our area. Nearby, we also work in Crook of Devon (1 mile east), Pool of Muckhart (1 mile north-west), Powmill (1 mile south), Blairingone (3 miles south-west) and Carnbo (3 miles north-east). We also work in nearby towns such as Auchterarder (9 miles north-west), Kinross (6 miles east), Oakbank (15 miles north), Bridge of Earn (13 miles north-east), Milnathort (7 miles north-east) and Abernethy (15 miles north-east).
Landmarks near Rumbling Bridge
Typical jobs here are in homes near St Serf's Church. Well-known places in the area include Castle Campbell (3.4 miles west). Green spaces nearby include Innerdownie.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams in Perth and Kinross and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
If you manage property in Rumbling Bridge, we will quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
How we price shower tray repair
Repairs from £95. Prices are worked out job by job. The main factors are:
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
- What the surface is made of
- Whether old repairs or coatings need taking off
The price reflects the work involved, not where you live. You’ll see the full price before booking, with nothing added on the day.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what we need:
- Natural light rather than flash
- A coin beside the damage so we can judge size
- A photo taken from further back
- Your postcode, so we can check dates
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
How it works
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours for a repair, longer for a full resurface. We tidy up before we leave and tell you when it’s ready to use.
- We check the tray is firmly supported and find the cause of any crack.
- We clean and prepare the damaged area or the whole tray.
- Chips and cracks are filled, reinforced and sanded level.
- We colour-match the repair, or spray a new finish across the whole tray.
- We leave it to cure; the shower is typically usable the next day.
How to prepare
- Have somewhere for us to park nearby if possible
- Let us know about parking or access
- Ensure the area is dry
Getting a price
Most clients in Rumbling Bridge get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Advice
When to call us in Rumbling Bridge
Rigid trays don’t bend, they crack when they sit on an uneven or poorly supported floor. Timber floors that move can cause it too.
Get in touch if you’ve noticed:
- Chips or cracks by the plughole
- Edge chips from dropped bottles
- Damage from a refit or building work
- Movement when you stand on it
What to look for in a quote
- How the room is protected while they work
- How long it needs to cure
- What happens if the damage is worse than the photos show
- Whether there are any call-out or travel charges
When a repair is not the answer
It helps to know what we can’t do:
- Leaks from the waste or pipework (a plumber’s job)
- Multiple cracks across the tray
- Rotten or damaged flooring underneath
If in doubt, send photos and we will say what we think before you book.
Materials we work on in Rumbling Bridge
- Cast iron
- Stone resin
- Enamelled steel
- Acrylic
- Ceramic
Questions from Rumbling Bridge
How do I book?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and you’ll get one combined price.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
How long before I can shower?
Normally by the following day. We will tell you the exact time when we finish.
Can you fix a cracked tray?
Often. A tray that moves needs its support sorting before the repair.
Can you replace the silicone at the same time?
Yes. We can repair and reseal on the same visit.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
About our accreditations · Every repair comes with a one-year guarantee.
