Cheshire West and Chester · England

Shower tray repair & resurfacing in Rushton, Cheshire West and Chester

Shower tray repair in Rushton without the cost of replacing. Send us photos for a fixed quote, then we come to you.

  • Repairs from £95
  • Scuffs and light scratches
  • Chips or cracks by the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair in Rushton

Materials and what they mean for the repair

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Ceramic

Ceramic trays are hard and glossy. They chip and crack from impact, and we match the gloss when we repair them.

Shower tray repair at your home in Rushton

You do not always need a new tray. If it’s solid underneath, it can normally be repaired in place, which is far less work than a replacement. Our repair technicians work on ceramic, acrylic and stone resin, and the jobs we see most are chipped corners or rims and a crack across the base.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Area
Rushton (CW6)
Area hub
Cheshire West and Chester
Cover
A year, on every repair
Price
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Page updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Rushton and the surrounding area

Rushton is about 4 miles west of Winsford, in Cheshire West and Chester. Anywhere in CW6, a technician comes to you. Rushton is one of 224 towns and villages in Cheshire West and Chester we cover. You can also see our page for Liverpool, about 21 miles away.

We work across the CW6 postcode area and the streets around it. Whether you live on Dogmore Lane and Moss Hall Lane or anywhere nearby, a technician can come to you. Neighbouring places we cover include Eaton (1 mile south-west), Little Budworth (1 mile north-east), Cotebrook (1 mile north-west), Tarporley (2 miles south-west) and Four Lane Ends (2 miles south-west). Larger places within reach include Chester (11 miles west), Ellesmere Port (14 miles north-west), Winsford (4 miles east), Northwich (7 miles north-east), Boughton (11 miles west) and Frodsham (9 miles north-west).

Near you in Rushton

Our clients here include homes close to Eaton Primary School, St Thomas' Church and Tarporley High School and Sixth Form College, among other places. Rushton’s nearest station is Delamere station, roughly 4.4 miles north-west. Other landmarks nearby include Tarporley War Memorial Hospital (1.9 miles south-west) and Peckforton Castle (4.8 miles south-west).

Map of Rushton © OpenStreetMap contributors

Rushton: your questions answered

How much does shower tray repair cost in Rushton?

Repairs from £95. Because every job differs, we price from pictures. You’ll get a fixed figure before booking.

Do you cover the entire of Cheshire West and Chester?

All of Cheshire West and Chester, and the rest of the UK. There’s no extra charge for travel.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Include photos of each item.

What happens if you find more damage?

If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.

Is a cracked tray repairable?

Typically, if the tray is firmly supported. We reinforce the crack, fill it and refinish the surface.

What happens after I send pictures?

You will get a fixed quote back, plus dates. You are under no obligation.

Can you quote from pictures?

Generally, yes. A close-up and a wider photo are enough to give a fixed quote.

Is it messy?

We protect the room with dust sheets and masking first, and tidy up before we leave.

DIY kit or professional repair?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

How the visit works

We agree an arrival time beforehand, so you are not left guessing. On site, it takes a few hours, or most of a day for a full resurface for most jobs. We leave the room clean and you will know when it can be used.

  1. First, we check whether the tray moves.
  2. We clean the damage and open it up so the repair can bond.
  3. Cracks are reinforced and the damage filled.
  4. The repair is shaped, colour matched and finished.
  5. It’s left to cure, generally until the day after.

Getting ready for the visit

  • Have a window or extractor fan available
  • Clear toiletries, mats and anything else from around the area
  • Let us know about parking or access

Getting a price

Getting a quote takes a couple of minutes: photograph the damage, then the whole shower tray, add your postcode and send them to us. What comes back is a fixed quote, not a guess.

Get a fixed quote

Related advice

What shower tray repair costs

Repairs from £95. Every quote is fixed and free. What we look at:

  • Access to the area
  • Previous DIY repairs that have to come out
  • The material
  • How many areas need work

What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed quote from your photos, so there are no surprises on the day.

How to get a fixed quote

Good photos mean an accurate price. Here’s what we find most useful:

  • A close-up of the damage, in focus
  • Daylight if possible, and no flash reflection
  • What it’s made of, if you know
  • Whether it’s been repaired or coated before

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.

When we would advise against a repair

In fairness, some problems need a different fix:

  • Rotten or damaged flooring underneath
  • A tray broken in more than one place
  • A tray that flexes because it was never properly supported

If in doubt, send pictures and we will say what we think.

Surfaces we repair

  • Enamelled steel
  • Stone resin
  • Acrylic
  • Cast iron
  • Ceramic

Do you need shower tray repair in Rushton?

A tired-looking tray is often the result of years of cleaning: limescale, harsh chemicals and abrasive pads strip the surface finish.

Signs it’s time to call us include:

  • Movement when you stand on it
  • Chips caused during fitting
  • Chips on the edges
  • Scratches in the surface

What your quote should include

  • Who will actually do the work
  • How the colour is matched
  • What aftercare is recommended
  • Whether the price is fixed and includes VAT

Our hiring checklist

Aftercare tips

So the finish stays in good condition for years:

  • Rinse the tray after each shower
  • Get a moving tray checked
  • Do not use strong acids or bleach
  • Keep the bathroom well ventilated

Check the silicone around the tray every few months, and reseal when it starts to fail.

If the tray creaks or moves, get it checked, before it cracks.

Landlord and trade work in Rushton

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.