Kent · England

Shower Tray Repair in Sandway

Damaged shower tray in Sandway? We put it right where it is, mix the colour on the day and guarantee the work for a year.

  • Repairs from £95
  • Chips on the edges
  • Damage from a refit or building work
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair in Sandway

What your shower tray is made of matters

Acrylic

Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.

Ceramic

Ceramic trays are hard and glossy. Impacts can chip or crack them, and we match the gloss when we repair them.

Shower tray repair in Sandway, done in place

In most cases, a damaged tray can be repaired where it is, from chipped edges to cracks across the floor of the tray. We match the colour and finish so the repair blends in. Common call-outs are for scratches in the surface and movement when you stand on it, across ceramic, acrylic and enamelled steel.

Every job is backed for twelve months. If something goes wrong with the work, we come back.

Where
Sandway (ME17)
Region
Kent
Guarantee
A year, on every repair
Price
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Page updated
23 October 2026
Discoloured square shower tray restored with a new white finish

How we price shower tray repair

Prices start from £95. There is no charge for travel to Sandway. The price depends on:

  • Previous DIY repairs that have to come out
  • How hard the colour is to match
  • Access to the area
  • What the surface is made of

No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

Send photos for a quote

It only takes a minute to photograph the damage. Please include:

  • A photo taken from further back
  • Any earlier repairs or coatings
  • Where you are, by postcode
  • The material, if you know it

There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Do you need shower tray repair in Sandway?

Stone resin trays are rigid, so they crack rather than bend when they sit on an uneven or poorly supported floor. Movement in a timber floor has the same effect.

Most people get in touch when they notice one of these:

  • A dull, stained or worn surface
  • Chips or cracks by the plughole
  • Edge chips from dropped bottles
  • Chips caused during fitting

Before booking anyone

  • Is the price fixed, and does it include VAT?
  • What preparation is included
  • When it can be used again
  • How changes to the job are handled

Choosing a repair company

Keeping it looking good

A little care keeps the finish looking good. We recommend:

  • Check the seal every few months
  • Clean with washing-up liquid and a soft cloth
  • Use the extractor fan
  • Avoid strong descalers and bleach

Keep heavy bottles off the tray floor, to avoid chips.

Act on split sealant early. It lets water behind the tray and can damage the floor below.

Common questions in Sandway

Is a cracked tray repairable?

Frequently. If the tray moves, the support needs fixing first.

Is repairing better than replacing?

Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.

Is it OK to use a cracked tray?

It’s best to stop using it until it’s checked, because water may be getting underneath.

It’s been repaired before. Can you still fix it?

Generally, yes. Let us know what was used before and we will plan for it.

How quickly can you book me in?

That depends on our diary for your area. We will offer you dates when we send your quote.

Do you reseal the tray as well?

Yes, if you’d like us to. After a repair is a good time to reseal.

Do you come to Sandway?

Yes. We cover the entire UK and come to Sandway and the rest of Kent. Send photos and we’ll quote, or call 0345 017 0787.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Landlords, agents and businesses in Sandway

For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.

Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Covering Sandway

Sandway is about 8 miles east of Maidstone, in Kent. From the centre of Sandway to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Sandway is one of 922 places in Kent we cover. Our nearest city page is London, about 39 miles away.

Here we cover the ME17 postcode area. That includes homes on Headcorn Road, Sandway Road and Old Ham Lane. Neighbouring places we cover include Platt's Heath (1 mile south-west), Liverton Street (1 mile south-west), Boughton Malherbe (1 mile south), Marley (1 mile north-west) and Harrietsham (1 mile north-west). Larger places within reach include Maidstone (8 miles west), Ashford (9 miles south-east), Sittingbourne (8 miles north), Faversham (10 miles north-east), Minster (14 miles north) and Kings Hill (13 miles west).

What’s near Sandway

Typical jobs here are in homes near Kiln Wood, St Mary's Church and Platts Heath Primary School, among other places. Other local landmarks include Wishful Thinker pub (under half a mile south-east) and The Lenham School (0.8 miles north-east). The closest station to Sandway is Lenham station, roughly 0.5 miles north-east. A little further out are The Dog Collar Museum (3.2 miles north-west) and Coldbridge Castle (2.1 miles south).

Map of Sandway © OpenStreetMap contributors

What we cannot put right

Not everything can be repaired, and we will tell you before we start. Repairs won’t solve:

  • Trays cracked in several places
  • Leaks from the waste or pipework (a plumber’s job)
  • Damage below the tray that needs a builder

If in doubt, send pictures and we’ll say what we think before you book.

What we work on

  • Ceramic
  • Acrylic
  • Enamelled steel
  • Stone resin
  • Cast iron

Should I try a DIY kit first?

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

How it works

A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Allow a few hours, or most of a day for a full resurface from start to finish. Before leaving, we tell you when it can be used and how to look after it.

  1. We check the tray for movement first.
  2. We clean the damage and open it up so the repair can bond.
  3. We reinforce any crack and fill the damage.
  4. We shape the repair, match the colour and finish it.
  5. We leave it to cure, normally until the following day.

How to prepare

  • Tell us about any previous repairs or coatings
  • Tell us about parking, stairs or access
  • Plan for the room to be out of bounds to pets and children

Get a quote

Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed quote back. There is no charge for the quote and no obligation.

Get a free quote

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.