County Durham · England

Shower tray repair & resurfacing in Shittlehope, County Durham

Problem with your shower tray in Shittlehope? We repair it in place, mix the colour on the day and back it with a one-year guarantee.

  • Repairs from £95
  • Chips or cracks by the plughole
  • A crack across the base
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted shower tray repair in Shittlehope

What we cannot put right

Some problems need a builder, plumber or fitter rather than us:

  • A tray broken in more than one place
  • Plumbing leaks under the tray
  • Water damage to the floor beneath the tray

If in doubt, send pictures and we’ll say what we think.

Materials we work on in Shittlehope

  • Acrylic
  • Ceramic
  • Stone resin
  • Cast iron
  • Enamelled steel

About our shower tray repair in Shittlehope

If the entire tray looks tired, we can resurface it, for a clean, uniform finish without removing the screen or tiles. If you are dealing with scratches from cleaning or grit and chips or cracks by the plughole, we can usually put it right, whatever the material.

Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.

Area
Shittlehope (DL13)
Area hub
County Durham
Guarantee
12 months on all our work
Price
From £95. Free, fixed quote from pictures
Call
0345 017 0787
Page updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Different materials, different repairs

Stone resin

Stone resin trays are rigid and slim. A flat, solid base is essential, and repairs are matched to the gel coat.

Enamelled steel

Enamelled steel trays behave like steel baths. Exposed metal can rust, so it’s worth repairing early.

Keeping it looking good

So the finish stays in good condition for years:

  • Give the tray a quick rinse after use
  • Do not ignore a tray that flexes
  • Keep the bathroom well ventilated
  • Do not use strong acids or bleach

Keep an eye on the sealant, and reseal when it starts to fail.

Act on split sealant early. Water gets behind and under the tray and can cause damage underneath.

When to call us in Shittlehope

Most cracked trays are trays that flex: without a solid, level base underneath, it flexes each time someone stands on it. Chips usually come from dropped bottles.

Get in touch if you’ve noticed:

  • Cracks running from the waste
  • Chips caused during fitting
  • Edge chips from dropped bottles
  • Staining and dullness across the tray

Comparing quotes

  • What happens if they find more damage
  • What prep work is covered
  • How the room is protected while they work
  • Whether a trained technician does the job

Choosing a repair company

Common questions in Shittlehope

It’s been repaired before. Can you still fix it?

In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as homeowners.

Is it OK to have pets in the house?

Keep pets and children away from the work area on the day.

Is there a guarantee?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

Can a cracked shower tray be repaired?

In most cases. If the tray moves, the support needs fixing first.

Which areas do you work in?

We work UK-wide, and that includes Shittlehope. Prices don’t change with location.

Can I keep using a cracked tray?

It’s best to stop using it until it’s checked, in case water is getting through.

What does shower tray repair cost?

Repairs from £95. Every job gets a fixed quote from your pictures. Send a close-up of the damage and a wider photo and your postcode.

The process

We turn up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes a few hours, or most of a day for a full resurface, and the room is left clean and tidy.

  1. We ensure the tray does not flex and look for the cause of any crack.
  2. The damaged area, or the whole tray, is cleaned and prepared.
  3. We fill and reinforce chips and cracks, then sand them flush.
  4. We colour-match the repair, or spray a new finish across the whole tray.
  5. The tray is left to cure and can normally be used the day after.

Before we arrive

  • Mention any parking restrictions or tricky access
  • Mention any earlier repairs or resurfacing
  • Make sure the room can be ventilated

Getting a price

There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.

Get a free quote

Related advice

What affects the price in Shittlehope

Repairs from £95. We give every job a fixed quote from photos. These are the things that affect it:

  • What the surface is made of
  • The size and number of damaged areas
  • Whether it’s a chip, crack, burn or wear
  • Unusual colours or finishes

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Quotes from your pictures

You can typically get a fixed price without us visiting. To help us price it:

  • A close-up of the damage, in focus
  • A photo taken from further back
  • What it’s made of, if you know
  • Daylight if possible, and no flash reflection

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire shower tray, we can give you a fixed quote.

Should I try a DIY kit first?

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

Landlords, agents and businesses in Shittlehope

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

Covering Shittlehope

Shittlehope is about 10 miles south-west of Consett, in County Durham. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Shittlehope is one of 329 towns and villages in County Durham where we work. We work right across the region, from Shittlehope to Newcastle upon Tyne (about 22 miles away).

Jobs in DL13 work the same way as everywhere else we cover. Whether you live on East End, Willard Grove and Centenary Close or anywhere nearby, a technician can come to you. Neighbouring places we cover include Unthank (1 mile west), Stanhope (1 mile north-west), Crawleyside (1 mile north-west), Bridge End (2 miles south-east) and Frosterley (2 miles south-east). We also work in nearby towns such as Consett (10 miles north-east), Bishop Auckland (14 miles south-east), Stanley (15 miles north-east), Crook (10 miles east), Annfield Plain (13 miles north-east) and Barnard Castle (14 miles south).

Near you in Shittlehope

Locally, our jobs take us to homes close to Church of St Thomas, Queens Head pub and Stanhope Barrington CofE Primary School, among other places. Green spaces nearby include Collier Law.

Map of Shittlehope © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.