Nottinghamshire · England

Shower Tray Repair for Spalford homes

Shower tray repair in Spalford without the cost of replacing. Get a fixed quote from your pictures, then book a visit.

  • Repairs from £95
  • A crack across the base
  • Damage around the waste
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair near Spalford

Shower tray repair in Spalford, done in place

The first thing we do is check the tray: a tray that moves needs its support sorted first, or the crack will come back. We will tell you if that is the case. Our repair technicians work on acrylic, cast iron and ceramic, and common reasons people contact us are a dull, stained or worn surface and a crack across the base.

All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.

Where
Spalford (NG23)
County
Nottinghamshire
Warranty
12 months on all our work
Price
From £95. Free, fixed price from pictures
Phone
0345 017 0787
Updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Repair or replace in Spalford?

A new shower tray often means a new enclosure fitting, new tiling and new sealant. A repair leaves all of that untouched. Repairs from £95, with every job priced individually. Our prices are the same across the UK, with no extra for Spalford. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why Spalford clients choose us

  • A fixed quote before booking
  • Every repair guaranteed for a year
  • Colours mixed by hand to suit your surface
  • We leave the room as we found it

Read our full price list.

How to care for the repair

How the surface is treated afterwards matters:

  • Get a moving tray checked
  • Keep the bathroom well ventilated
  • Do not use strong acids or bleach
  • Reseal when the silicone splits or turns black

Keep an eye on the sealant, and reseal when it starts to fail.

Act on split sealant early. Water gets behind and under the tray and can cause damage underneath.

DIY repairs versus a professional job

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

Work for landlords and builders

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.

Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.

What we can’t put right

Not everything can be repaired, and we’d rather say so up front. We can’t fix:

  • Rotten or damaged flooring underneath
  • Movement caused by a poor base, until the support is fixed
  • Trays cracked in several places

Send us photos and we will tell you honestly before booking.

Materials we repair

  • Cast iron
  • Ceramic
  • Acrylic
  • Enamelled steel
  • Stone resin

How we price shower tray repair

Repairs from £95. We do not charge extra for travel to Spalford. The price depends on:

  • Previous DIY repairs that have to come out
  • Whether it’s a chip, crack, burn or wear
  • How many items we do on one visit
  • The material and finish

Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.

How to get a fixed price

You can take the pictures on your phone. Make sure they show:

  • Natural light rather than flash
  • Details of any past repairs
  • The material, if you know it
  • The postcode, so we can plan the visit

Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you’ll get a fixed quote back. Quotes are free and no obligation.

FAQs for Spalford

Do you work in Spalford?

We do. We send a technician to Spalford for every job, with no extra charge for travel.

Is it OK to use a cracked tray?

Not until you know the crack is not letting water through. Look for damp or stains below.

Is there a guarantee?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

Can a stained tray be refinished?

Yes. Resurfacing gives a worn tray an even, clean finish.

It’s been repaired before. Can you still fix it?

Typically, yes. We remove the old repair before doing a new one, so let us know about it.

How soon can you come?

It depends on the time of year and where you are. We will offer you dates when we send your quote.

Can you repair several things at once?

Of course, and it typically saves money. Send pictures of everything together and you will get one combined price.

Can you replace the silicone at the same time?

We can. It’s a good time to replace old sealant.

Spalford and nearby

Spalford is about 7 miles west of North Hykeham, in Nottinghamshire. Across the NG23 area, a technician comes to you. Spalford is one of 329 towns and villages in Nottinghamshire where we work. Our jobs stretch from Spalford to Leeds (53 miles away).

Jobs in NG23 are booked in the same way as anywhere else. From Sand Lane, Rabbithill Lane and Eagle Road or anywhere nearby, a technician can come to you. If you are just outside Spalford, we cover South Clifton (1 mile north-west), Wigsley (2 miles east), High Marnham (2 miles west), North Clifton (2 miles north-west) and Thorney Moor (2 miles north-east). Within a short drive, we also cover Newark-on-Trent (10 miles south), Retford (11 miles north-west), Balderton (11 miles south), Southwell (13 miles south-west), New Ollerton (11 miles west) and Fernwood (11 miles south).

Around Spalford

Spalford’s nearest station is Swinderby station, about 3.6 miles south-east. For a walk, there’s Tunman Wood.

Map of Spalford © OpenStreetMap contributors

Different materials, different repairs

Enamelled steel

Enamelled steel trays behave like steel baths. Exposed metal can rust, so early repairs help.

Acrylic

Acrylic-capped trays are lighter, so a firm base is essential. We repair cracks and scratches.

How the visit works

Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which usually takes a few hours for a repair, longer for a full resurface. If we find something your photos didn’t show, we will explain it before carrying on.

  1. The surrounding area is sheeted and masked.
  2. Any sealant in the way is cut out.
  3. The tray is cleaned, keyed and repaired.
  4. The surface is refinished to match.
  5. We clean up and give you the curing time.

Preparing for the visit

  • Tell us about parking, stairs or access
  • Let the surface dry out before the visit
  • Mention if the room is upstairs or in a flat

Getting a price

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.

Get a free quote

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.