Rutland · England

Shower Tray Repair in Stoke Dry

Shower tray chip, crack and scratch repairs and resurfacing in Stoke Dry, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • A tray that looks tired however much you clean it
  • Movement when you stand on it
Surface Doctor technician refinishing the outside of a roll-top bath

Need shower tray repair in Stoke Dry?

Shower tray repair at your home in Stoke Dry

In most cases, a damaged tray can be repaired where it is, from a chip by the waste to a crack across the base. The colour and finish are matched. Whether it’s cracks running from the waste and chipped corners or rims, we can help, on cast iron, acrylic and ceramic alike.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Where
Stoke Dry (LE15)
Region
Rutland
Warranty
One year on every repair
Price
From £95. Free and fixed, from your photos
Phone
0345 017 0787
Updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

What your shower tray is made of matters

Stone resin

Stone resin is a dense, rigid material with a smooth gel coat. Poor support underneath leads to cracks, and chips are filled and matched to the surface.

Ceramic

Ceramic gives a hard, high-gloss surface. They chip and crack from impact, and we match the gloss when we repair them.

Your questions about shower tray repair in Stoke Dry

Can landlords book you?

Yes, often. We quote for multiple addresses and fit around tenancy changeovers.

Do you come to Stoke Dry?

We do. Technicians travel to Stoke Dry from across the region, with no extra charge for travel.

What happens once I’ve sent pictures?

We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.

Is repairing better than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.

Can you resurface a whole tray?

Yes. Resurfacing gives a worn tray an even, clean finish.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

What does shower tray repair cost?

Repairs from £95. We give a fixed quote based on pictures of the damage. Send a close-up and a photo of the whole item and your postcode.

Is it OK to use a cracked tray?

Only if you are sure it isn’t leaking. Look for damp or stains below.

Landlords, agents and businesses in Stoke Dry

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

We work for landlords, letting agents and housing providers in Stoke Dry as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.

Keeping it looking good

A little care keeps the finish looking good. We recommend:

  • Use the extractor fan
  • Clean with washing-up liquid and a soft cloth
  • Rinse the tray after each shower
  • Avoid strong descalers and bleach

Rinse the tray down after showering, use mild, non-abrasive cleaners, and keep the sealant in good condition so water can’t get underneath.

A tray that moves underfoot needs looking at, before it cracks.

What we are called out for in Stoke Dry

Cracks frequently start at the waste, because that’s where the tray is weakest and the fitting puts pressure on it.

It’s worth getting a quote if you see:

  • A tray that creaks or moves underfoot
  • A damaged area around the waste
  • A dull, stained or worn surface
  • Snagging damage in a new bathroom

What to look for in a quote

  • What prep work is covered
  • Whether there are any call-out or travel charges
  • Whether they match the colour on site
  • Whether the price is fixed and includes VAT

10 questions to ask before booking

What shower tray repair costs

Repairs from £95. There’s no area surcharge for Stoke Dry. What changes the price is:

  • Access to the area
  • How hard the colour is to match
  • Whether we combine several jobs
  • Previous DIY repairs that have to come out

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Send photos for a quote

Good pictures mean an accurate price. Here’s what we find most useful:

  • A coin or ruler next to the damage for scale
  • Whether it’s been repaired or coated before
  • A wider photo showing the entire shower tray
  • Any details about the material

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.

What happens on the day

Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes a few hours for a repair, longer for a full resurface, depending on what we find, and we finish with a tidy-up and a look at the finished work together.

  1. First, we check whether the tray moves.
  2. The damaged area is cleaned and opened up.
  3. Cracks are reinforced and the damage filled.
  4. The repair is shaped, colour-matched and finished.
  5. It’s left to cure, normally until the day after.

How to prepare

  • Have a window or extractor fan available
  • Let the surface dry out before the visit
  • Tell us if there are stairs or a lift

Getting a price

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole shower tray, we can give you a fixed price without visiting.

Get a free quote

Read more

Should I try a DIY kit first?

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

Where we work around Stoke Dry

Stoke Dry is about 6 miles north of Corby, in Rutland. We visit homes and businesses in Stoke Dry, so there is no workshop to go to. Our technicians cover all 47 towns and villages across Rutland. Our jobs stretch from Stoke Dry to Birmingham (about 51 miles away).

Every address in LE15 is covered. Whether you live on Grange Lane and Seaton Road or anywhere nearby, we can come to you. Close by, we cover Seaton (1 mile east), Bisbrooke (1 mile north-west), Thorpe by Water (1 mile south), Glaston (1 mile north) and Harringworth (2 miles south-east). Further out, we also cover Oakham (7 miles north), Barleythorpe (8 miles north), Cottesmore (10 miles north), Langham (8 miles north), North Luffenham (4 miles north-east) and Whissendine (11 miles north).

Near you in Stoke Dry

Locally, our jobs take us to homes close to Church of All Hallows and Uppingham Community College. A little further out are Rockingham Castle (4.7 miles south). Not far away are King's Hill and Great Merrible Wood.

Map of Stoke Dry © OpenStreetMap contributors

Repairing versus replacing in Stoke Dry

A new shower tray normally means taking out the enclosure and tiles, preparing a new base and re-tiling. Repairing or resurfacing the tray leaves all of that alone. Repairs from £95, with every job priced individually. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access.

What you get with us

  • Most jobs done in one visit
  • No extra charge for your area
  • Work done at your home or business
  • Dust sheets down, tidy finish

Take a look at our full price list.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.