Conwy · Wales
Shower tray repair & resurfacing in Tal-y-bont, Conwy
Shower tray repair in and around Tal-y-bont: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- A dull, stained or worn surface
- A crack across the base
Repair or replace in Tal-y-bont?
A new shower tray normally involves taking out the enclosure and tiles, relaying the base and tiling again. Repairing or resurfacing the tray leaves all of that alone. Prices start from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Why us?
- No extra charge for your area
- Repair technicians who travel to you, UK-wide
- We will tell you if it’s not worth repairing
- Dust sheets down, tidy finish
See our full price list.
Shower tray repair at your home in Tal-y-bont
A worn or stained tray can be resurfaced, giving it a fresh, even finish. If you’re dealing with staining and dullness across the tray and scratches in the surface, we can usually put it right.
We stand behind the work with a one-year guarantee.
- Where
- Tal-y-bont (LL32)
- Region
- Conwy
- Cover
- One year on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
FAQs for Tal-y-bont
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
How much does shower tray repair cost in Tal-y-bont?
Repairs from £95. We give a fixed quote based on photos of the damage. Send a close-up and a photo of the whole item with your LL32 postcode.
Is it worth repairing rather than replacing?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
Can a stained tray be refinished?
Yes, it’s a common job. A full resurface makes a tired tray look fresh.
Do you charge for travel?
There’s no separate call-out charge. The fixed price covers the visit and the work.
What happens once I’ve sent pictures?
We look at the pictures and reply with a fixed price and some dates. If we need another angle, we’ll ask.
What we’re called out for in Tal-y-bont
The waste is a common starting point for cracks, because that’s where the tray is weakest and the fitting puts pressure on it.
If you can see any of these, send us a photo:
- A crack across the base
- Chips or cracks by the plughole
- Snagging damage in a new bathroom
- Chips on the edges
Comparing quotes
- How long it needs to cure
- Whether cleaning and preparation are in the price
- Whether the price covers travel
- How the colour is matched
How to care for the repair
To keep it looking its best for years:
- Check the seal every few months
- Give the tray a quick rinse after use
- Keep heavy bottles on a shelf
- Use a mild, non-abrasive cleaner
Rinse the tray down after showering, use mild, non-abrasive cleaners, and keep the sealant in good condition so water cannot get underneath.
A small crack lets in a little water every time you shower, and over months that can rot the floor. An early repair is far cheaper than floor repairs.
Where we work around Tal-y-bont
Tal-y-bont is about 8 miles south-west of Colwyn Bay, in Conwy. Our technicians come to homes and businesses in Tal-y-bont and nearby villages, so you don’t need to take anything anywhere. Tal-y-bont is one of 75 towns and villages in Conwy where we work. You can also see our page for Liverpool, about 41 miles away.
Jobs in LL32 are booked in the same way as anywhere else. We regularly work on streets such as Conway Road and Hendy and the roads around them. Neighbouring places we cover include Caerhun (1 mile north-east), Ty'n-y-groes (2 miles north), Rowen (2 miles north), Tal-y-cafn (2 miles north-east) and Henryd (4 miles north). Within a short drive, we also cover Bae Colwyn (8 miles north-east), Llandudno (8 miles north), Old Colwyn (9 miles north-east), Colwyn Bay (9 miles north-east), Abergele (12 miles north-east) and Colwyn Bay (8 miles north-east).
Landmarks near Tal-y-bont
In Tal-y-bont, that means homes near Ysgol Gynradd Tal-Y-Bont, St Peter's Church and Y Bedol Inn and the streets around them. The closest station to Tal-y-bont is Dolgarrog station, roughly 1.5 miles south-east. A little further out are Conwy Hospital (5.8 miles north) and Pen-y-Castell (2.1 miles south-east). The countryside around Tal-y-bont includes Llyn Syberi and Pen y Gaer.
Landlords, agents and businesses in Tal-y-bont
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
If you manage property in Tal-y-bont, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.
Different materials, different repairs
Ceramic
Ceramic trays are hard and glossy. Impacts can chip or crack them, and the repair is polished to match the shine.
Stone resin
Stone resin trays are rigid and slim. They need a flat, solid base, and we match repairs to the surface finish.
Towns and villages near Tal-y-bont
What else we do in Tal-y-bont
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Honest limits
To be straight with you, there are a few things a repair will not fix:
- A tray broken in more than one place
- Leaks from the waste or pipework (a plumber’s job)
- A tray that flexes because it was never properly supported
Not sure? Send photos and we’ll give you a straight answer before booking.
What we work on
- Cast iron
- Ceramic
- Acrylic
- Enamelled steel
- Stone resin
What happens on the day
We turn up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a few hours, or most of the day to resurface the whole tray, and the room is left clean and tidy.
- The surrounding area is sheeted and masked.
- Any sealant in the way is cut out.
- We clean and key the tray, then repair the damage.
- The surface is refinished to match.
- We tidy up and tell you when you can shower.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Have somewhere for us to park nearby if possible
- Let the surface dry out before the visit
Ask for a price
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed quote back. Quotes are free and you’re under no obligation.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
