Oxfordshire · England
Shower tray repair & resurfacing in Tetsworth, Oxfordshire
We travel to Tetsworth for shower tray chip, crack and scratch repairs and resurfacing. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- A tray that flexes
- Chips or cracks by the plughole
Aftercare tips
To keep it looking its best for years:
- Report any creaking or movement early
- Check the seal every few months
- Rinse away soap after showering
- Don’t stand heavy bottles on the tray
Rinse the tray after use, use mild, non-abrasive cleaners, and keep the sealant in good condition so water cannot get underneath.
If the tray creaks or moves, get it checked, before it cracks.
Shower tray repair in Tetsworth without replacing anything
We check the tray before repairing it: a tray that moves needs its support sorted first, or the crack will come back. We will explain what we find. Common call-outs are for scratches from cleaning or grit and damage from a refit or building work, in cast iron, acrylic and stone resin.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Area
- Tetsworth (OX9)
- Region
- Oxfordshire
- Cover
- One year on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Signs you need shower tray repair in Tetsworth
Rigid trays do not bend, they crack if the floor beneath them isn’t flat and fully supported. Movement in a timber floor has the same effect.
The most common problems we are called about are:
- Scratches in the surface
- Snagging damage in a new bathroom
- Staining and dullness across the tray
- Chips on the edges
What to look for in a quote
- Is the price fixed, and does it include VAT?
- How the room is protected while they work
- What prep work is covered
- How long it needs to cure
What a repair cannot fix
We will not take on work that will not last, so these are the limits:
- Trays cracked in several places
- Damage below the tray that needs a builder
- Movement caused by a poor base, until the support is fixed
Not sure? Send photos and we will give you a straight answer before you book.
What we work on
- Stone resin
- Cast iron
- Ceramic
- Acrylic
- Enamelled steel
Repair or replace in Tetsworth?
A new tray can be cheap, but fitting it is not: removing the screen, breaking out tiles, relaying the base and re-tiling. Repairing it takes one visit. Prices start from £95. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why us?
- Same prices wherever you are
- Nothing taken out or refitted
- CHAS, Constructionline and SafeContractor accredited
- Colour-matched on site
Read our prices page.
About Tetsworth
Tetsworth is about 3 miles south-west of Thame, in Oxfordshire. Wherever you are in the OX9 postcode area, a technician comes to you. We cover 443 places in Oxfordshire, from the larger towns to small villages. Our jobs stretch from Tetsworth to London (42 miles away).
Postcode districts we cover here: OX9. Whether you live on High Street, Swan Gardens and Back Street or a nearby road, we can come to you. If you are just outside Tetsworth, we cover North Weston (2 miles north), Milton Common (3 miles north-west), Albury (3 miles north-west), Great Haseley (3 miles west) and Tiddington (3 miles north-west). Further out, we also cover Oxford (10 miles west), Didcot (12 miles south-west), Bicester (15 miles north-west), Abingdon-on-Thames (12 miles west), Thame (3 miles north-east) and Henley-on-Thames (13 miles south).
Local landmarks in Tetsworth
In Tetsworth, that means homes near Church of St Giles, The Swan pub and Tetsworth Primary School and the streets around them. The closest station to Tetsworth is Haddenham & Thame Parkway station, about 5 miles north-east of the centre. Other landmarks nearby include Thame Museum (2.9 miles north) and Thame Community Hospital (2.8 miles north-east). Not far away are Wells Farm and Bald Hill.
Tetsworth: your questions answered
It’s been repaired before. Can you still fix it?
Generally, yes. Tell us what was done before.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Can you price it without visiting?
Nearly always. If pictures do not show enough, we’ll ask for another angle.
Do the materials smell?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
Can you resurface a whole tray?
Yes. The entire tray can be resurfaced without removing it.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can a cracked shower tray be repaired?
In most cases. If the tray moves, the support needs fixing first.
How we price shower tray repair
Repairs from £95. You’ll know the full cost before booking. We look at:
- How much damage there is
- Access to the area
- What kind of damage it is
- Whether we combine several jobs
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Getting a price from photos
A couple of clear pictures is all it takes. Try to include:
- A coin beside the damage so we can judge size
- The material, if you know it
- Natural light rather than flash
- A close-up of the damage, in focus
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Towns and villages near Tetsworth
More services for Tetsworth
Materials and what they mean for the repair
Enamelled steel
Steel trays have an enamel surface like a steel bath. Exposed metal can rust, so early repairs help.
Ceramic
Ceramic trays are hard and glossy. Impacts can chip or crack them, and we match the gloss when we repair them.
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
How it works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a few hours, or most of a day for a full resurface. If anything looks different from your pictures, we will talk to you before going ahead.
- We check the tray is firmly supported and find the cause of any crack.
- Next we clean and prepare the tray.
- We fill and strengthen any chips or cracks and sand them smooth.
- We colour-match the repair, or spray a new finish across the whole tray.
- Once cured, generally by the following day, you can use the shower.
Before we arrive
- Ensure the area is dry
- Mention any earlier repairs or resurfacing
- Clear toiletries, mats and anything else from around the area
Getting a price
To get a price, send two or three pictures through our quote form or call us. We will tell you honestly whether it can be repaired.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
