Cornwall · England

Shower Tray Repair in Trevenen Bal

Shower tray repair in and around Trevenen Bal: photo quotes, tidy work and a year’s guarantee.

  • Repairs from £95
  • Damage from a refit or building work
  • Damage around the waste
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted shower tray repair in Trevenen Bal

Shower tray repair at your home in Trevenen Bal

Most tray damage can be repaired in place, from chipped edges to cracks across the floor of the tray. We match the colour and finish so the repair blends in. We’re frequently asked to fix a damaged area around the waste and scratches in the surface, on cast iron, ceramic and stone resin.

Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.

Stained shower tray resurfaced to clean white, before and after
Where
Trevenen Bal (TR13)
Area hub
Cornwall
Warranty
A year, on every repair
Quotes
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Updated
23 October 2026

How to look after the repair

To keep it looking its best for years:

  • Stick to gentle cleaners
  • Avoid strong descalers and bleach
  • Rinse away soap after showering
  • Report any creaking or movement early

Keep an eye on the sealant, and reseal when it starts to fail.

A small crack lets in a little water every time you shower, which can damage the floor over time. Getting it repaired quickly is much cheaper than fixing a floor.

Landlord and trade work in Trevenen Bal

Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.

We work for landlords, letting agents and housing providers in Trevenen Bal as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

About Trevenen Bal

Trevenen Bal is about 2 miles north-east of Helston, in Cornwall. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our repair technicians cover all 644 towns and villages across Cornwall, from the larger towns to small villages.

Our repair technicians cover all of TR13. We also travel to Wendron (1 mile north), Trewennack (1 mile south), Lowertown-by-Helston (1 mile west), Gwavas (2 miles west) and Helston (2 miles south-west). We also work in nearby towns such as Truro (13 miles north-east), Falmouth (8 miles east), Camborne (7 miles north), Redruth (8 miles north), Penzance (13 miles west) and Hayle (8 miles north-west).

Local landmarks in Trevenen Bal

Our customers here include homes close to Wendron Church of England Primary School, Church of Saint Gwendron and Helston Community College. Well-known places in the area include National Museum Of Gardening (2.6 miles west) and Helston Community Hospital (2.2 miles south). Open spaces near Trevenen Bal include Carnmenellis and The Loe.

Map of Trevenen Bal © OpenStreetMap contributors

Your questions about shower tray repair in Trevenen Bal

How do I book?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Can you redo someone else’s repair?

Generally, yes. Tell us what was done before.

Is a cracked tray repairable?

In most cases. A tray that moves needs its support sorting before the repair.

What happens next?

We check the damage, the material and your postcode, then reply with a quote and the next dates we have.

Can tenants book a repair?

Of course. Check with your landlord; we can send the quote to them too.

Will it make a mess?

Dust sheets and masking go down before we start, and we clean up when we have finished.

What does shower tray repair cost?

Repairs from £95. We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.

When can I use the shower again?

Generally the day after. We will tell you the exact time when we finish.

Repairs by material

Stone resin

Stone resin trays are heavy and rigid with a gel-coat finish. Poor support underneath leads to cracks, and chips are filled and matched to the surface.

Ceramic

Ceramic gives a hard, high-gloss surface. Impacts can chip or crack them, and we match the gloss when we repair them.

What we can’t put right

We will always be straight with you, so here’s what a repair cannot fix:

  • Leaks from the waste or pipework (a plumber’s job)
  • Movement caused by a poor base, until the support is fixed
  • Multiple cracks across the tray

Send us pictures and we will tell you honestly.

Materials we work on in Trevenen Bal

  • Enamelled steel
  • Ceramic
  • Acrylic
  • Stone resin
  • Cast iron

What shower tray repair costs

Prices start from £95. There are no hourly rates or hidden extras. The price depends on:

  • Whether it’s a chip, crack, burn or wear
  • How hard the colour is to match
  • The material
  • The size and number of damaged areas

A repair is priced on what needs doing, not where you live. You’ll see the full price before booking.

Getting a price from pictures

It only takes a minute to photograph the damage. Try to send:

  • Any earlier repairs or coatings
  • A clear, close picture of the problem area
  • Something in shot to show the size
  • Any details about the material

Most customers in Trevenen Bal get their price from pictures. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

Can I fix it myself?

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

When to call us in Trevenen Bal

Cracks frequently start at the waste, because that’s where the tray is weakest and the fitting puts pressure on it.

The most common problems we are called about are:

  • A tray that flexes
  • A crack across the base
  • Scratches in the surface
  • Chips caused during fitting

Comparing quotes

  • How soon you can use it again
  • What aftercare is recommended
  • How your room will be protected
  • Is the price fixed, and does it include VAT?

10 questions to ask before you book

What happens on the day

Arrival times are agreed in advance, so you know when to expect us. Once we’re there, the work takes a few hours for a repair, longer for a full resurface for most jobs. The room is left tidy.

  1. First, we check whether the tray moves.
  2. The damaged area is cleaned and opened up.
  3. Cracks are reinforced and the damage filled.
  4. We shape the repair, match the colour and finish it.
  5. It’s left to cure, normally until the day after.

How to prepare

  • Keep a parking space free if you can
  • Open a window if you can
  • Tell us about any previous repairs or coatings

Get a quote

You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

Get a free quote

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.