South Gloucestershire · England

Shower tray repair & resurfacing in Whiteshill, South Gloucestershire

Shower tray repair across Whiteshill and nearby, done in a single visit in most cases and guaranteed for a year.

  • Repairs from £95
  • Staining and dullness across the tray
  • A damaged area around the waste
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted shower tray repair in Whiteshill

Repairs by material

Acrylic

Acrylic trays are lighter and slightly flexible, so a firm base is essential. Cracks and scratches can be repaired.

Ceramic

Ceramic trays are hard and glossy. Impacts can chip or crack them, and we match the gloss when we repair them.

Shower tray repair in Whiteshill, done in place

You do not always need a new tray. If it’s solid underneath, it can normally be repaired in place, which is far less work than a replacement. We are often asked to fix staining and dullness across the tray and damage from a refit or building work, in enamelled steel, ceramic and stone resin.

The work is covered for a year after we finish. Just call us if there’s a problem and we will come back.

Discoloured square shower tray restored with a new white finish
Where
Whiteshill (BS16)
County
South Gloucestershire
Warranty
12 months on all our work
Quotes
From £95. Fixed and free, based on photos
Call
0345 017 0787
Updated
23 October 2026

Honest limits

A few problems are outside what a surface repair can do:

  • Water damage to the floor beneath the tray
  • A tray broken in more than one place
  • A tray that flexes because it was never properly supported

Not sure? Send pictures and we will give you a straight answer.

What we work on

  • Cast iron
  • Stone resin
  • Enamelled steel
  • Ceramic
  • Acrylic

Repair or replace in Whiteshill?

Replacing a tray typically means refitting the screen, retiling and resealing. Repairing it avoids all of that. Our shower tray repair starts from £95. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

What you get with us

  • Colour-matched on site
  • Work done at your home or business
  • CHAS and Constructionline accredited
  • Fixed prices from your pictures

Take a look at our full price list.

Whiteshill and nearby

Whiteshill is about 2 miles north-west of Mangotsfield, in South Gloucestershire. Whether you’re in the middle of Whiteshill or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Whiteshill is one of 110 towns and villages in South Gloucestershire we cover. Our nearest city page is Birmingham, about 71 miles away.

Our repair technicians cover all of the BS16 postcode area and the streets around it. Streets in the area include Moorend Road, Worrells Lane and Pye Corner, and we cover them all. If you are just outside Whiteshill, we cover Winterbourne Down (1 mile north-west), Moorend (1 mile south-east), Hambrook (1 mile south-west), Winterbourne (1 mile north-east) and Great Stoke (1 mile north-west). Further out, we also cover Kingswood (4 miles south), Yate (5 miles north-east), Thornbury (7 miles north), Patchway (3 miles north-west), Morton (7 miles north) and Filton (3 miles west).

Near you in Whiteshill

In Whiteshill, that means homes near Hambrook Primary School, Whiteshill Evangelical Church and Oldbury Court Estate. Also close by are Winterbourne Academy (0.9 miles north), South Gloucestershire Hospital Home Teaching Service (1.3 miles south-west) and Lucky Dragon pub (under half a mile south-west). The nearest railway station is Bristol Parkway station, about 1.4 miles west. Nearby you’ll also find Frenchay Village Museum (1.3 miles south-west) and The Mall (3.8 miles west). The countryside around Whiteshill includes Purdown.

Map of Whiteshill © OpenStreetMap contributors

What affects the price in Whiteshill

Prices start from £95. A fixed quote means you know the cost before booking. We look at:

  • Where the damage is and how we get to it
  • Whether it’s a chip, crack, burn or wear
  • What the surface is made of
  • Any earlier repairs that need removing first

Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.

Getting a price from photos

Good photos mean an accurate price. Here’s what we find most useful:

  • Any details about the material
  • Details of any past repairs
  • Where you are, by postcode
  • One picture of the whole shower tray

For a price in Whiteshill, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Whiteshill questions

Can you make an old tray look new?

Yes. The entire tray can be resurfaced without removing it.

Are you accredited?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

How do I book?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Are there extra charges for Whiteshill?

There’s no separate call-out charge. The fixed price covers the visit and the work.

What if the damage is worse than the photos show?

Your quote covers the damage in the photos. If there’s more, we will tell you before starting.

Can I get a quote without a visit?

Normally, yes. Clear photos let us give you a fixed quote without visiting.

Is a cracked tray repairable?

Frequently. If the tray moves, the support needs fixing first.

I’m a tenant. Can you help?

Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.

Looking after it afterwards

So the finish stays in good condition:

  • Rinse the tray after each shower
  • Clean with washing-up liquid and a soft cloth
  • Check the seal every few months
  • Do not ignore a tray that flexes

Check the silicone around the tray every few months, and reseal when it starts to fail.

A tray that moves underfoot needs looking at, before it cracks.

Landlords, agents and businesses in Whiteshill

Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.

Should I try a DIY kit first?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

What we do, step by step

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours, or most of a day for a full resurface. We tidy up before we leave and let you know when you can use it again.

  1. The surrounding area is sheeted and masked.
  2. Any sealant in the way is cut out.
  3. The tray is cleaned, keyed and repaired.
  4. The surface is refinished to match.
  5. We clean up and give you the curing time.

Getting ready for the visit

  • Have a window or extractor fan available
  • Let the surface dry out before the visit
  • Point us to the nearest place to park

Get a quote

A quote takes minutes to ask for: photograph the damage, then the entire shower tray, include your postcode and send them over. What comes back is a fixed price, not a guess.

Get a free quote

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.