East Riding of Yorkshire · England
Shower tray repair & resurfacing in Wilberfoss, East Riding of Yorkshire
Problem with your shower tray in Wilberfoss? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- A damaged area around the waste
- Scratches in the surface
How we handle shower tray repair in Wilberfoss
We repair cracks, chips and scratches in stone resin, acrylic and ceramic trays, or resurface the whole tray if it’s worn. Nothing is taken out, so the enclosure and tiles are not disturbed. Common call-outs are for cracks running from the waste and chips or cracks by the plughole, on acrylic, cast iron and ceramic.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Area
- Wilberfoss (YO41)
- Region
- East Riding of Yorkshire
- Cover
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Work for landlords and builders
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Wilberfoss and nearby
Wilberfoss is about 5 miles west of Pocklington, in East Riding of Yorkshire. Customers in Wilberfoss get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Wilberfoss is one of 299 towns and villages in East Riding of Yorkshire where we work. Our jobs stretch from Wilberfoss to Leeds (29 miles away).
Every address in YO41 is within our area. We regularly work on streets such as Main Street, Ings Road and Middle Street and the roads around them. We also cover the places around Wilberfoss: Fangfoss (3 miles north-east), Bolton (3 miles east), Full Sutton (3 miles north), Gowthorpe (3 miles north-east) and Barmby Moor (3 miles south-east). We also work in nearby towns such as Pocklington (5 miles east), Market Weighton (11 miles south-east), Howden (14 miles south), Stamford Bridge (3 miles north), Gilberdyke (15 miles south-east) and Holme upon Spalding Moor (9 miles south-east).
Local landmarks in Wilberfoss
Locally, our jobs take us to homes close to Church of St John the Baptist and the streets around them. Well-known places in the area include Buttercrambe Castle (4.6 miles north).
Keeping it looking good
Aftercare is simple:
- Use a mild, non-abrasive cleaner
- Get a moving tray checked
- Use the extractor fan
- Avoid strong descalers and bleach
Wait the full curing time before you shower. After that, gentle cleaning and good ventilation keep it in good shape.
A tray that moves underfoot needs looking at, before it cracks or gets worse.
Prices and what affects them
Prices start from £95. Each job gets its own fixed quote. This is what makes a difference:
- Doing more than one item at once
- The type of damage
- The material
- Access to the area
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Getting a price from pictures
You can take the photos on your phone, there is no need for anything special. Make sure they show:
- A clear, close picture of the problem area
- Any earlier repairs or coatings
- A photo taken from further back
- Any details about the material
Upload a picture of the damage and one of the entire item, with your YO41 postcode, and we’ll come back with a fixed quote.
When to call us in Wilberfoss
Heavy bottles, shower heads and dropped razors chip trays, typically along the edges or by the waste.
These are the problems we are asked about most:
- Scuffs and light scratches
- Damage around the waste
- A crack across the base
- Movement when you stand on it
Before booking anyone
- Whether there are any call-out or travel charges
- Whether the price is fixed and includes VAT
- How to look after the finish
- The length of the guarantee and what it covers
Different materials, different repairs
Enamelled steel
Steel trays have an enamel surface like a steel bath. Chips can rust if they’re left, so it’s worth repairing early.
Stone resin
Stone resin trays are popular because they’re rigid and low-profile. They need a flat, solid base, and repairs are matched to the gel coat.
When a repair isn’t the answer
Not everything can be repaired, and we will tell you before we start. We can’t fix:
- Movement caused by a poor base, until the support is fixed
- Trays cracked in several places
- Water damage to the floor beneath the tray
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Cast iron
- Enamelled steel
- Acrylic
- Ceramic
- Stone resin
FAQs for Wilberfoss
How long before I can shower?
Generally the following day. We will confirm before we leave.
Is it worth repairing rather than replacing?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Is there any odour?
Expect a mild smell while we’re working that clears as it cures.
What does shower tray repair cost?
Repairs from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Can you repair several things at once?
Yes, and it’s often cheaper. Send pictures of everything together and we will quote them together.
Can a cracked shower tray be repaired?
Generally, as long as it doesn’t flex. We reinforce the crack, fill it and refinish the surface.
What we do, step by step
Here’s how a visit generally runs: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Plan for a few hours, or most of the day to resurface the whole tray. Before we go, we will explain when it can be used and how to look after it.
- We check the tray is firmly supported and find the cause of any crack.
- The damaged area, or the whole tray, is cleaned and prepared.
- We fill and reinforce chips and cracks, then sand them flush.
- We match the colour, or refinish the full tray.
- The tray is left to cure and can usually be used the next day.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Let the surface dry out before the visit
- Plan for the room to be out of bounds to pets and children
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole shower tray, include your postcode and send them over. What comes back is a fixed price, not a guess.
Advice
Places near Wilberfoss
More services for Wilberfoss
About our accreditations · Every repair comes with a one-year guarantee.
