Bath and North East Somerset · England

Shower tray repair & resurfacing in Winford, Bath and North East Somerset

Shower tray chip, crack and scratch repairs and resurfacing in Winford, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • Chips or cracks by the plughole
  • A cracked shower tray
Surface Doctor technician refinishing the outside of a roll-top bath

Book shower tray repair in Winford

What affects the price in Winford

Repairs from £95. There’s no area surcharge for Winford. What changes the price is:

  • The colour and finish to match
  • What kind of damage it is
  • How much damage there is
  • Where the damage is and how we get to it

We don’t add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.

Send pictures for a quote

Photographing the damage takes a minute. Try to send:

  • What it’s made of, if you know
  • Any earlier repairs or coatings
  • Good light, ideally daylight, without flash glare
  • One picture of the entire shower tray

Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you’ll get a fixed quote back. Quotes are free and you’re under no obligation.

Shower tray repair in Winford without replacing anything

Shower tray repairs are one of our most common jobs. Chipped edges, cracks and worn finishes can all be put right without removing the tray. Our technicians work on stone resin, ceramic and acrylic, and people most often call us about a dull, stained or worn surface and snagging damage in a new bathroom.

Big or small, you get the same one-year guarantee in Winford and across Bath and North East Somerset.

Before and after: an old shower tray refinished by Surface Doctor
Location
Winford (BS40)
County
Bath and North East Somerset
Cover
12 months on all our work
Quotes
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Page updated
23 October 2026

Work for landlords and builders

We regularly work with letting and managing agents. Just send pictures, the address and how to get access.

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

DIY kit or professional repair?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

Your questions about shower tray repair in Winford

Do you do work for letting agents?

We do, regularly. We can quote for several properties together and work between tenancies.

Do you reseal the tray as well?

Yes. Add it to your quote and we will do both on one visit.

Can tenants book a repair?

Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.

It’s been repaired before. Can you still fix it?

Generally, yes. We remove the old repair before doing a new one, so mention it when you send photos.

Do you hold any accreditations?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

How long before I can shower?

You will get the exact time when we finish, usually the following day.

What happens once I’ve sent pictures?

You get a fixed quote and available dates. If we need another angle, we’ll ask.

Is it safe with children and pets around?

Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.

Where we work around Winford

Winford is about 5 miles south-east of Nailsea, in Bath and North East Somerset. Across the BS40 area, we come to you. Our repair technicians cover all 136 towns and villages in Bath and North East Somerset, from the larger towns to small villages.

Our visits in BS40 work the same way as everywhere else we cover. Streets in the area include Market Place, High Street and Church Road, and we cover them all. Neighbouring places we cover include Upper Littleton (1 mile south-east), Felton (1 mile west), Hounsley Batch (1 mile south), Littleton (1 mile south-east) and Regil (2 miles south). We also work in nearby towns such as Bath (13 miles east), Keynsham (7 miles east), Bathwick (13 miles east), Walcot (13 miles east), Westmoreland (12 miles east) and Kingsmead (12 miles east).

Around Winford

Locally, our jobs take us to homes close to Church of St Mary and St Peter, Winford Church of England Primary School and Chew Valley School and the streets around them. The closest station to Winford is Parson Street station, roughly 4.2 miles north-east. Well-known places in the area include Barrow Hospital (2.4 miles north). For a walk, there’s Dundry Hill and Backwell Lake.

Map of Winford © OpenStreetMap contributors

Keeping it looking good

To keep it looking its best for years:

  • Keep the bathroom well ventilated
  • Stick to gentle cleaners
  • Store bottles off the tray
  • Rinse the tray after each shower

Wait the full curing time before you shower. After that, gentle cleaning and good ventilation keep it in good shape.

A tray that moves underfoot needs looking at, before it cracks or gets worse.

Honest limits

We will always be straight with you, so here’s what a repair can’t fix:

  • Trays cracked in several places
  • Leaks from the waste or pipework (a plumber’s job)
  • A tray that flexes because it was never properly supported

Not sure? Send photos and we’ll give you a straight answer.

Surfaces we repair

  • Ceramic
  • Acrylic
  • Enamelled steel
  • Cast iron
  • Stone resin

Repairs by material

Enamelled steel

Enamelled steel trays behave like steel baths. Exposed metal can rust, so it’s worth repairing early.

Stone resin

Stone resin trays are heavy and rigid with a gel-coat finish. They crack if the base is not fully supported, and chips can be filled and matched.

How the visit works

Here’s how a visit generally runs: we arrive on time, sheet and mask the area around the job, do the job and clear up. Allow a few hours for a repair, longer for a full resurface. Before leaving, we tell you how long to leave it and how to look after it.

  1. We protect the floor and the enclosure.
  2. Any sealant in the way is cut out.
  3. The tray is cleaned, keyed and repaired.
  4. We refinish the surface to match the tray.
  5. We tidy up and tell you when you can shower.

Before we arrive

  • Mention if the room is upstairs or in a flat
  • Avoid using the area for a few hours before we arrive
  • Clear toiletries, mats and anything else from around the area

Getting a price

You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

Get a fixed quote

Related advice

Common problems we fix in Winford

A tired-looking tray is often the result of years of cleaning: abrasive pads, strong chemicals and limescale strip the surface finish.

People normally call us when they notice one of these:

  • A tray that looks tired however much you clean it
  • Snagging damage in a new bathroom
  • Damage around the waste
  • A tray that flexes

What your quote should include

  • How to care for the finish
  • What preparation is included
  • Whether there are any call-out or travel charges
  • Whether a trained technician does the job

10 questions to ask before booking

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.