East Sussex · England

Sink & basin repair in Beckley Furnace, East Sussex

Damaged basin in Beckley Furnace? We put it right where it is, match it on site and back it with a one-year guarantee.

  • Repairs from £95
  • Cracks around the tap holes or waste
  • Crazing in the glaze
Surface Doctor technician refinishing the outside of a roll-top bath

Sink repair in Beckley Furnace

Work for landlords and builders

We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll arrange it.

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

Sink repair at your home in Beckley Furnace

From cloakroom basins to period pieces, in ceramic, composite and enamel. Taps and wastes stay connected. We regularly repair Belfast and butler sinks, ceramic & vitreous china basins and antique & period basins, and the jobs we see most are chips around the rim and a crazed, tired basin.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Basin with yellowed glaze resurfaced to a clean white finish
Where
Beckley Furnace (TN31)
County
East Sussex
Warranty
One year on every repair
Price
From £95. Free and fixed, from your photos
Call
0345 017 0787
Updated
23 October 2026

About Beckley Furnace

Beckley Furnace is about 7 miles north of Hastings, in East Sussex. From the centre of Beckley Furnace to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Beckley Furnace is one of 289 towns and villages in East Sussex we cover. Our jobs stretch from Beckley Furnace to London (48 miles away).

We work across TN31 and the streets around it. Other places close to Beckley Furnace include Broad Oak (1 mile south-west), Broadland Row (1 mile south-east), Beckley (2 miles north-east), Udimore (2 miles south-east) and Northiam (3 miles north). Larger places within reach include Hastings (7 miles south), Bexhill-on-Sea (10 miles south-west), St Leonards (8 miles south), Hastings Old Town (7 miles south), Belmont (7 miles south) and Hollington (7 miles south-west).

What’s near Beckley Furnace

Our clients here include homes close to Brede Primary School and the streets around them. The nearest railway station is Doleham station, roughly 2.9 miles south. Other landmarks nearby include Conquest Hospital (5.6 miles south). Not far away are Flatropers Wood.

Map of Beckley Furnace © OpenStreetMap contributors

Common questions in Beckley Furnace

How quickly can you book me in?

Your quote comes with available dates. Tell us if you need it done quickly.

Do you restore period basins?

Yes. Period basins are worth keeping, and we repair them sympathetically.

Can you redo someone else’s repair?

Typically, yes. We remove the old repair before doing a new one, so mention it when you send pictures.

Can you repair a cracked basin?

Generally, if it is not leaking. If it leaks through, replacement is normally better.

Can a chip in a sink be fixed?

Yes, very often. We shape and polish it to match the glaze.

Will it make a mess?

No. The work area is masked and covered, and we leave the room clean.

What do you need from me?

A close-up, a wider photo and your postcode. After that, we just agree a date.

How do I get a price for sink repair in Beckley Furnace?

Prices start from £95. We give a fixed quote from your photos. Send a close-up and a photo of the entire item and your postcode.

What we cannot put right

Honesty matters more than a booking, so here’s what a repair won’t do:

  • A loose basin, until it’s refixed
  • A basin cracked through and leaking
  • Widespread crazing

Send us pictures and we will tell you honestly.

Materials we repair

  • Belfast and butler sinks
  • Ceramic & vitreous china basins
  • Enamelled basins
  • Vanity unit basins
  • Antique & period basins

Prices and what affects them

Repairs from £95. We don’t charge extra for travel to Beckley Furnace. The price comes down to:

  • The colour and finish to match
  • How many items we do on one visit
  • How easy the damage is to reach
  • Any earlier repairs that need removing first

A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

How to get a fixed quote

It only takes a minute to photograph the damage, and it saves a visit. Please include:

  • Good light, ideally daylight, without flash glare
  • A coin or ruler next to the damage for scale
  • A clear, close picture of the problem area
  • Any details about the material

Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed quote back. There’s no charge for the quote and you are under no obligation.

Common problems we fix in Beckley Furnace

Fittings tightened too hard strain the basin, and cracks can start at the tap holes.

Clients usually contact us about:

  • A period basin that needs restoring
  • Chips on the rim or front edge
  • A crazed, tired basin
  • Chips on a built-in basin

What to look for in a quote

  • Whether a trained technician does the job
  • The length of the guarantee and what it covers
  • How long it needs to cure
  • How your room will be protected

Choosing a repair company

What your basin is made of matters

Period and antique

Older basins may have crazing, chips and makers’ marks. We repair carefully around original features and leave the character intact.

Composite and resin

Many vanity units have resin or composite basins. They repair well, and the colour is mixed to suit.

DIY repairs versus a professional job

If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.

How to care for the repair

Looking after the surface is easy:

  • Ask a plumber not to overtighten fittings
  • Clean with a soft cloth and mild detergent
  • Repair chips before they stain
  • Don’t stand heavy bottles on the edge

A quick wipe after use helps, and steer clear of harsh chemicals.

Cracks by the tap holes can grow, so it’s worth having it checked quickly. If it’s leaking, turn off the water to the basin until it’s checked.

What we do, step by step

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a few hours, and we finish by cleaning up and talking you through the result.

  1. We check the basin is secure and not leaking.
  2. We degrease and key the damage.
  3. We build up the filler and sand it flush.
  4. Colour and gloss are matched.
  5. We clear away and tell you when it can be used.

Before we arrive

  • Make sure the area is dry
  • Keep pets and children out of the room while we work
  • Point us to the nearest place to park

How to get a price

Most clients in Beckley Furnace get their price from pictures. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

Send photos for a quote

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.