Lincolnshire · England

Sink Repair in Bicker

We travel to Bicker for chip, crack and resurfacing work on bathroom sinks and basins. Nothing is taken out, and the work is guaranteed.

  • Repairs from £95
  • Chips on the rim or front edge
  • A crazed, tired basin
Surface Doctor technician refinishing the outside of a roll-top bath

Sink repair in Bicker

Sink repair in Bicker without replacing anything

It’s not just the colour we match, it’s the gloss, because a dull patch on a shiny basin stands out. Repairs are polished to the same shine. Whether it’s a period basin that needs restoring and crazing in the glaze, we can generally put it right, on enamelled basins, Belfast and butler sinks and ceramic & vitreous china basins alike.

Big or small, it’s backed by a one-year guarantee in Bicker and across Lincolnshire.

Crack in a basin rim, shown before and after repair
Where
Bicker (PE20, PE11)
County
Lincolnshire
Guarantee
One year on every repair
Quote
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Last updated
23 October 2026

What your basin is made of matters

Period and antique

Older basins may have crazing, chips and makers’ marks. We repair carefully around original features.

Composite and resin

Cast mineral and resin basins are common in vanity units. They repair well, with colour mixed on site.

What affects the price in Bicker

Prices start from £95. You’ll know the full cost before booking. We look at:

  • Access to the area
  • How many areas need work
  • Unusual colours or finishes
  • How many items we do on one visit

Our prices are the same across the UK, so there’s no premium for Bicker. The job itself decides the price: how much damage, what it’s made of and how many items.

Send photos for a quote

We price nearly every job from pictures. This is what we need:

  • Any details about the material
  • Your postcode, so we can check dates
  • Any earlier repairs or coatings
  • A coin beside the damage so we can judge size

A quote takes minutes to ask for: take one close-up and one wider shot of the basin, include your postcode and send them over. You will get a fixed quote, not an estimate.

Common problems we fix in Bicker

Fine crazing in the glaze is normally down to age, and strong chemicals speed it up.

Contact us if you’ve noticed:

  • Chips on a built-in basin
  • Cracks around the tap holes or waste
  • Crazing in the glaze
  • Chips on the rim or front edge

What your quote should include

  • What protection goes down before work starts
  • When it can be used again
  • Is the price fixed, and does it include VAT?
  • What aftercare is recommended

Choosing a repair company

The process

The work is clean and fairly quiet. We protect the area first, then the job itself takes a morning or an afternoon. At the end we talk you through how soon it can be used and how to care for it.

  1. First the basin is cleaned and the damage checked.
  2. The chip or crack is filled and shaped to match the basin.
  3. We colour-match the finish to the glaze.
  4. We polish it into the surrounding surface.
  5. The basin can normally be used later that day or the following day.

Preparing for the visit

  • Ensure the area is dry
  • Mention any earlier repairs or resurfacing
  • Clear the area around the damage

Get a quote

Most clients in Bicker get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.

Get a fixed quote

Advice

Looking after it afterwards

To keep it looking its best for years:

  • Fittings shouldn’t be over-tightened
  • Get chips repaired early
  • Use a heat mat for hair tools
  • Use gentle cleaners

Use gentle cleaners and take care with heavy bottles and hair tools.

Cracks by the tap holes can grow, so it’s worth having it checked quickly. If it’s leaking, turn off the water to the basin until it’s checked.

Bicker questions

What if the damage is worse than the photos show?

If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Can landlords book you?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Can you repair a chipped basin?

Yes, very frequently. The repair is shaped and polished to blend in.

Is there a guarantee?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

How do I get a price for sink repair in Bicker?

Prices start from £95. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.

It’s been repaired before. Can you still fix it?

Yes, regularly. It can add a little time, which we include in the quote.

Is it safe with children and pets around?

Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.

Landlords, agents and businesses in Bicker

Landlords, letting agents and housing providers in Bicker use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.

We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.

DIY repairs versus a professional job

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

Should you replace it?

Replacing a basin can mean a plumber, new taps or wastes and repairs to the tiles or vanity unit. A repair leaves everything in place. Prices start from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.

What you get with us

  • We come to you, anywhere in the UK
  • We will tell you if it’s not worth repairing
  • No need to remove anything
  • CHAS, Constructionline and SafeContractor accredited

Read our prices page.

About Bicker

Bicker is about 7 miles south-west of Boston, in Lincolnshire. We travel to clients in Bicker, so there’s no workshop to go to. Our repair technicians cover 732 places across Lincolnshire, from the larger towns to small villages. You can also see our page for Birmingham, about 78 miles away.

All of PE20 and PE11 is covered, from the main roads to the quietest streets. You’ll find streets such as High Street, Church Road and Low Gate Lane, and we cover them all. We also cover the places around Bicker: Bicker Gauntlet (1 mile north), Bicker Bar (1 mile north-east), Hoffleet Stow (1 mile south-east), Drayton (1 mile north-east) and Swineshead (2 miles north-east). Further out, we also cover Boston (7 miles north-east), Spalding (9 miles south), Sleaford (11 miles north-west), Bourne (14 miles south-west), Holbeach (12 miles south-east) and Austerby (14 miles south-west).

Local landmarks in Bicker

In Bicker, that means homes near The Thomas Cowley High School and Church of St Swithin. Bicker’s nearest station is Swineshead station, about 3.2 miles north of the centre.

Map of Bicker © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.