Cumbria · England

Sink & basin repair in Broughton Mills, Cumbria

Sink repair in Broughton Mills without the cost of replacing. Send us photos for a fixed quote, then we come to you.

  • Repairs from £95
  • A crazed, tired basin
  • A chipped vanity basin
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted sink repair in Broughton Mills

Questions from Broughton Mills

Can you repair something that is been repaired before?

Most of the time. Let us know what was used before.

Is a crack in a basin repairable?

Often. Send us pictures and we’ll tell you.

Does someone need to be in?

Yes. We need access to the room while we work, at a time that suits you.

Do you charge for travel?

There’s no separate call-out charge. The fixed quote covers the visit and the work.

How do I book?

Send pictures through the quote form or call 0345 017 0787, and we’ll take it from there.

What does sink repair cost?

Repairs from £95. We give a fixed price based on photos of the damage. Send a close-up and a picture of the whole item and your postcode.

Do you restore period basins?

Yes. We repair them without hiding their character.

Will it make a mess?

We protect the room with dust sheets and masking first, and we clean up when we have finished.

About our sink repair in Broughton Mills

From hairline cracks by the taps to chips on the rim, most basin damage can be repaired without removing anything. The taps stay connected and the basin stays on the wall. Common call-outs are for chips around the rim and a period basin that needs restoring, across ceramic & vitreous china basins, Belfast and butler sinks and enamelled basins.

All our work comes with our one-year guarantee, wherever you are in Cumbria.

Cracked basin edge repaired and blended in (before and after)
Area
Broughton Mills (LA20)
County
Cumbria
Cover
One year on every repair
Quotes
From £95. Free, fixed price from pictures
Telephone
0345 017 0787
Last updated
23 October 2026

Covering Broughton Mills

Broughton Mills is about 9 miles north-west of Ulverston, in Cumbria. Anywhere in LA20, a technician comes to you. Broughton Mills is one of 438 towns and villages in Cumbria we cover. You can also see our page for Liverpool, about 63 miles away.

We work across the LA20 postcode area. If you’re just outside Broughton Mills, we cover Bank End (2 miles south-west), Broughton in Furness (2 miles south), Duddon Bridge (2 miles south-west), Ulpha (2 miles north-west) and Foxfield (3 miles south). Larger places within reach include Barrow-in-Furness (13 miles south), Ulverston (9 miles south-east), Hindpool (13 miles south), Salthouse (13 miles south), Dalton-in-Furness (10 miles south) and Risedale (13 miles south).

Around Broughton Mills

Around Broughton Mills, we work in homes near Holy Innocents Church and Blacksmiths Arms and the streets around them. The closest station to Broughton Mills is Foxfield station, about 3.2 miles south. The countryside around Broughton Mills includes Stickle Tarn and Caw.

Map of Broughton Mills © OpenStreetMap contributors

What we are called out for in Broughton Mills

Basins are right where bottles and hair tools get dropped. Fittings that are overtightened can also crack the ceramic.

Keep an eye out for these signs:

  • Crazing in the glaze
  • An antique basin with chips
  • Cracks around the tap holes or waste
  • A chipped vanity basin

Before you book anyone

  • Whether the price covers travel
  • What prep work is covered
  • How the colour is matched
  • How the room is protected while they work

How to compare quotes

Repairing versus replacing in Broughton Mills

A basin cracked through and leaking needs replacing. For chips, surface cracks and crazing, a repair is typically best. Prices start from £95. Compared with replacing, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Why choose Surface Doctor in Broughton Mills

  • One-year guarantee on every repair
  • Everything repaired in place
  • Fixed prices from your pictures
  • We come to you, anywhere in the UK

Take a look at our full price list.

Should I try a DIY kit first?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

Looking after it afterwards

It’s all simple stuff:

  • Have new chips repaired quickly
  • Keep heavy bottles off the rim
  • Avoid abrasive pads
  • Ask a plumber not to overtighten fittings

Go gently for the first few days, then clean it with mild products. Keep heavy bottles and hot tools away from the rim.

Chips near the waste or taps can let water in, which can stain the repair area. Repairing it early keeps the job small.

Honest limits

A few problems are outside what a surface repair can do:

  • Through cracks that let water out
  • A basin that moves on its brackets
  • Plumbing leaks

Send us pictures and we’ll tell you honestly.

Materials we repair

  • Enamelled basins
  • Vanity unit basins
  • Ceramic & vitreous china basins
  • Belfast and butler sinks
  • Antique & period basins

The process

A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Allow a few hours. Before leaving, we tell you how long to leave it and what to avoid for the first few days.

  1. First, we check the basin is firm and dry.
  2. We degrease and key the damage.
  3. We build up the filler and sand it flush.
  4. Colour and gloss are matched.
  5. We clear away and tell you when it can be used.

Before we arrive

  • Keep a parking space free if you can
  • Clear toiletries, mats and anything else from around the area
  • Keep pets and children out of the room while we work

Getting a price

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole basin, we can price the job the same day in most cases.

Get a free quote

Advice

What affects the price in Broughton Mills

Repairs from £95. We charge the same across the UK, including Broughton Mills. What changes the price is:

  • How much damage there is
  • Doing more than one item at once
  • The colour and finish to match
  • The material

Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access.

How to get a fixed quote

You can take the photos on your phone. Make sure they show:

  • What it’s made of, if you know
  • Whether it’s been repaired or coated before
  • A clear, close picture of the problem area
  • A wider photo showing the whole basin

If you’re in Broughton Mills and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Materials and what they mean for the repair

Composite and resin

Many vanity units have resin or composite basins. They repair well, and the colour is mixed to suit.

Vitreous china

Vitreous china is fired ceramic with a glassy glaze. We polish repairs to match the glaze.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.