Nottinghamshire · England

Sink Repair in Colston Bassett

Chip, crack and resurfacing work on bathroom sinks and basins in Colston Bassett, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • Crazing in the glaze
  • An original basin worth saving
Surface Doctor technician refinishing the outside of a roll-top bath

Need sink repair in Colston Bassett?

Sink repair in Colston Bassett without replacing anything

Whether it’s a chipped rim or a crack by the tap holes, most basin damage can be repaired without removing anything. Nothing is unplumbed or taken off the wall. Typical jobs include a chipped vanity basin and chips on the rim or front edge, on Belfast and butler sinks, vanity unit basins and enamelled basins.

All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.

Ceramic basin shown before and after repair
Where
Colston Bassett (NG12)
County
Nottinghamshire
Cover
A year, on every repair
Quotes
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Last updated
23 October 2026

Common problems we fix in Colston Bassett

Most chips come from something dropped into the bowl, and some happen during bathroom refits.

Look out for these signs:

  • A chipped vanity basin
  • Chips around the rim
  • An original basin worth saving
  • Cracks starting at the waste

Before you book anyone

  • Whether they match the colour on site
  • Whether cleaning and preparation are in the price
  • How the room is protected while they work
  • If travel is included in the price

Choosing a repair company

Colston Bassett and nearby

Colston Bassett is about 7 miles east of West Bridgford, in Nottinghamshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover 329 places across Nottinghamshire. Our nearest city page is Birmingham, about 49 miles away.

Our visits in NG12 are booked in the same way as anywhere else. That includes homes on Church Gate, Hall Lane and School Lane. We also cover the places around Colston Bassett: Owthorpe (1 mile west), Kinoulton (2 miles south-west), Hickling (3 miles south), Hose (3 miles south-east) and Long Clawson (4 miles south). Larger places within reach include Beeston (11 miles west), Carlton (8 miles north-west), Hucknall (14 miles north-west), Newark-on-Trent (14 miles north-east), West Bridgford (7 miles west) and Netherfield (7 miles north-west).

Local landmarks in Colston Bassett

Locally, our jobs take us to homes close to Martins Arms Public House and St. John's Church. For rail, the closest station is Bingham station, about 4.2 miles north. Other landmarks nearby include Radcliffe Asylum (3.9 miles north-west).

Map of Colston Bassett © OpenStreetMap contributors

FAQs for Colston Bassett

How soon can you come?

That depends on our diary for your area. We will offer you dates when we send your quote.

What happens next?

We review the photos and send a fixed quote.

Will the price change on the day?

If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.

Do you need to take the basin off the wall?

No, it stays where it is. We protect the area around it and work in place.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can you quote from pictures?

Typically, yes. Clear photos let us give you a fixed price without visiting.

Can you repair something that’s been repaired before?

Yes, we often do. Removing the old work can add time, and that’s in the quote.

Will you leave a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

Work for landlords and builders

Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Should you replace it?

Basins are frequently built into vanity units or tiled in, so replacing one disturbs more than you’d expect. Repairing it keeps everything as it is. Our sink repair starts from £95. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Why Colston Bassett customers choose us

  • One visit for most repairs
  • Accredited with CHAS, Constructionline and SafeContractor
  • One price list for the entire UK
  • Honest advice, even when it means no job

Take a look at our full price list.

What we do, step by step

Here’s how a visit normally runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Allow a morning or an afternoon. Before we go, we’ll explain how long to leave it and how to care for it.

  1. We protect the area around the basin.
  2. We clean and prepare the chip or crack.
  3. We fill it and shape it to the basin’s curve.
  4. We match the colour by hand.
  5. The repair is polished to the basin’s gloss and left to cure.

How to prepare

  • Point us to the nearest place to park
  • Keep pets and children out of the room while we work
  • Make sure the room can be ventilated

Ask for a price

No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Get a free quote

Related advice

What we can’t put right

Honesty matters more than a booking, so here’s what a repair cannot fix:

  • Crazing all over, which suits resurfacing
  • A basin that moves on its brackets
  • Plumbing leaks

Send us pictures and we’ll tell you honestly before booking.

Materials we repair

  • Enamelled basins
  • Antique & period basins
  • Belfast and butler sinks
  • Ceramic & vitreous china basins
  • Vanity unit basins

Different materials, different repairs

Vitreous china

Most basins are vitreous china with a hard, glossy glaze. Matching that shine is the key to a good repair, so we polish the repair to suit.

Composite and resin

Cast mineral and resin basins are common in vanity units. They repair well, and the colour is mixed to suit.

Keeping it looking good

To keep it looking its best:

  • Don’t overtighten taps
  • Have new chips repaired quickly
  • Don’t rest hot hair tools on the basin
  • Don’t stand heavy bottles on the edge

Keep hair straighteners and heavy bottles away from the basin edge, to avoid new chips.

Cracks by the tap holes can grow, so get it looked at early. If water is getting through, isolate the basin until it’s seen to.

DIY kit or professional repair?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.