Somerset · England
Sink & basin repair in Exford, Somerset
Problem with your basin in Exford? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- Chips on a built-in basin
- A chipped basin edge
Should you replace it?
Matching a discontinued basin can be impossible, particularly if it matches the toilet and bath. A repair keeps your suite matching. Repairs from £95, with every job priced individually. The price reflects the work involved, not where you live. The full price is agreed before you book, with nothing added on the day.
Why book with us
- A year’s guarantee on all work
- One visit for most repairs
- Colour-matched on site
- Technicians who travel to you, UK-wide
See our prices page.
Sink repair at your home in Exford
When a basin is worn or crazed all over, we can resurface it in place, giving it an even new finish. If you’re dealing with chips on a built-in basin and an original basin worth saving, we can help.
You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Exford (TA24)
- County
- Somerset
- Warranty
- One year on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Repairs from £95. You will not pay by the hour. The price depends on:
- How much damage there is
- Unusual colours or finishes
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
How to get a fixed quote
You can usually get a fixed price without us visiting. To make it quick:
- A clear, close picture of the problem area
- Whether it’s been repaired or coated before
- One picture of the whole basin
- Your postcode, so we can check dates
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Can I fix it myself?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Exford and the surrounding area
Exford is about 9 miles south-west of Minehead, in Somerset. Jobs in Exford are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. We cover 640 places in Somerset.
Our technicians cover all of the TA24 postcode area. Whether you live on Chapel Street, Conifer Close and Combe Lane or anywhere nearby, we can come to you. If you are just outside Exford, we cover Withypool (2 miles south), Winsford (4 miles south-east), Wheddon Cross (4 miles east), Cutcombe (5 miles east) and Hawkridge (5 miles south). Larger places within reach include Minehead (9 miles north-east), Watchet (14 miles east), Williton (14 miles east), Dulverton (8 miles south-east), Porlock (6 miles north) and Dunster (9 miles east).
Landmarks near Exford
Around Exford, we work in homes near Exford Church of England First School, The Crown Hotel and Church of St Mary Magdalene, among other places. Well-known places in the area include Cow Castle (3.7 miles west). Open spaces near Exford include Staddon Hill.
Looking after it afterwards
Most damage we see is avoidable. A few tips:
- Do not overtighten taps
- Steer clear of harsh chemicals
- Keep straighteners away from the basin
- Keep heavy bottles off the rim
Wipe the basin over after use, and steer clear of harsh chemicals.
Chips near the waste or taps can let water in and stain. Repairing it early keeps the job small.
Different materials, different repairs
Period and antique
Period basins often have marks and character worth keeping. We repair them sympathetically.
Composite and resin
Cast mineral and resin basins are common in vanity units. They repair well, with colour mixed on site.
FAQs for Exford
How quickly can you book me in?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
Is there a guarantee?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Will you remove the sink?
No. We repair it where it is, with the taps left connected.
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can pets and children be at home?
Just keep them out of the work area. We will tell you when the room can be used again.
Which areas do you work in?
The whole UK, including all of Somerset. Send your postcode with your pictures and we’ll confirm dates.
Can you repair a chipped basin?
Yes, it’s one of our most common jobs. We shape and polish it to match the glaze.
When we would advise against a repair
We would rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- A basin coming away from the wall (that needs refixing)
- Leaking taps or wastes (a plumber’s job)
- Widespread crazing
Send us pictures and we will tell you honestly before you book.
What we work on
- Belfast and butler sinks
- Antique & period basins
- Enamelled basins
- Vanity unit basins
- Ceramic & vitreous china basins
More services for Exford
When to call us in Exford
Dropped glass bottles and heavy toiletries are the usual cause of chips, and some happen during bathroom refits.
Typical reasons for a call-out include:
- Knocks from hair straighteners
- Crazing in the glaze
- Chips on the rim or front edge
- Cracks starting at the waste
Comparing quotes
- When it can be used again
- A fixed price, and whether VAT is included
- Who turns up on the day
- What aftercare is recommended
What we do, step by step
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a few hours. We tidy up before we leave and tell you when it’s ready to use.
- First the basin is cleaned and the damage checked.
- We fill the chip or crack and shape it to the original profile.
- The finish is matched to the glaze.
- We polish it into the surrounding surface.
- The basin can usually be used later that day or the next day.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Clear the area around the damage
- Tell us about any previous repairs or coatings
Getting a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
