Conwy · Wales

Sink Repair for Hendre homes

Local sink repair for Hendre: photo quotes, tidy work and a year’s guarantee.

  • Repairs from £95
  • Knocks from hair straighteners
  • Chips around the rim
Surface Doctor technician refinishing the outside of a roll-top bath

Book sink repair in Hendre

How we handle sink repair in Hendre

From hairline cracks by the taps to chips on the rim, most basin damage can be repaired without removing anything. Nothing is unplumbed or taken off the wall. Whether it’s chips on a built-in basin and damage from dropped bottles or hair tools, we can normally put it right, on Belfast and butler sinks, vanity unit basins and enamelled basins alike.

All of our repairs are guaranteed for twelve months in Hendre and everywhere else. We return to put right any problem with the work.

Where
Hendre (LL32)
Region
Conwy
Guarantee
12 months on all our work
Quote
From £95. Free and fixed, from your photos
Phone
0345 017 0787
Updated
23 October 2026
Ceramic basin shown before and after repair

Looking after it afterwards

It’s all simple stuff, just a few sensible habits:

  • Do not stand heavy bottles on the edge
  • Get chips repaired early
  • Steer clear of harsh chemicals
  • Fittings shouldn’t be over-tightened

Use gentle cleaners and take care with heavy bottles and hair tools.

A crack near the taps can spread, so get it looked at early. If water is getting through, isolate the basin until it’s seen to.

Common problems we fix in Hendre

Glaze crazing comes with age and temperature changes, and strong chemicals speed it up.

Customers typically contact us about:

  • A crack near the taps
  • Chips on a built-in basin
  • An antique basin with chips
  • Damage from dropped bottles or hair tools

Questions to ask before you book

  • Whether they match the colour on site
  • Whether the price is fixed and includes VAT
  • How long the guarantee is and what it covers
  • What protection goes down before work starts

Our hiring checklist

What we can’t put right

To be straight with you, some problems need a different fix:

  • A basin that moves on its brackets
  • Leaks from the fittings
  • Glaze crazing across the whole basin, where resurfacing is better

Send us pictures and we’ll tell you honestly.

Surfaces we repair

  • Antique & period basins
  • Belfast and butler sinks
  • Ceramic & vitreous china basins
  • Vanity unit basins
  • Enamelled basins

Landlords, agents and businesses in Hendre

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.

What your basin is made of matters

Period and antique

Older basins may have crazing, chips and makers’ marks. We repair them sympathetically.

Vitreous china

Ceramic basins have a fired, glassy surface. Repairs are polished to match that glaze.

DIY kit or professional repair?

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

What affects the price in Hendre

Repairs from £95. There are no hourly rates or hidden extras. The price is based on:

  • Doing more than one item at once
  • How hard the colour is to match
  • Access to the area
  • How many areas need work

A repair is priced on what needs doing, not your postcode. The full price is agreed before booking.

Send pictures for a quote

Two or three clear pictures are normally enough. Try to include:

  • Any details about the material
  • Good light, ideally daylight, without flash glare
  • One picture of the entire basin
  • Any earlier repairs or coatings

You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.

The process

A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Allow a few hours from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.

  1. First the basin is cleaned and the damage checked.
  2. Next we fill the damage and shape it to the basin’s profile.
  3. The finish is matched to the glaze.
  4. We polish it into the surrounding surface.
  5. Typically the basin is back in use the same day or the next.

How to prepare

  • Clear the area around the damage
  • Plan for the room to be out of bounds to pets and children
  • Make sure the area is dry

How to get a price

Most clients in Hendre get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

Send pictures for a quote

Related advice

Common questions in Hendre

Do you cover Hendre?

Yes. We work across the UK and come to Hendre and the rest of Conwy. Send pictures and we will quote, or call 0345 017 0787.

Can you do more than one item on the same visit?

Yes, and it’s often cheaper. Just add the extra items to your pictures and you will get one combined price.

Can you repair something that is been repaired before?

Yes, we frequently do. It can add a little time, which we include in the quote.

Can you repair a cracked basin?

Surface cracks can typically be repaired. A crack that leaks right through generally means a new basin.

Can pets and children be at home?

Just keep them out of the work area. We will tell you when the room can be used again.

Do you disconnect the taps?

No, it stays where it is. We protect the area around it and work in place.

How soon can you come?

That depends on our diary for your area. We’ll offer you dates when we send your quote.

Does someone need to be in?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Hendre and the surrounding area

Hendre is about 3 miles south of Llandudno, in Conwy. Whether you are in the middle of Hendre or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in 75 places in Conwy, from the larger towns to small villages. We work right across the region, from Hendre to Liverpool (39 miles away).

Our visits in LL32 work the same way as everywhere else we cover. If you’re just outside Hendre, we cover Groesffordd (1 mile south-west), Gyffin (1 mile north-east), Cadnant Park (1 mile north), Henryd (1 mile south) and Conwy (1 mile north-east). Larger places within reach include Bae Colwyn (5 miles east), Llandudno (3 miles north), Old Colwyn (6 miles east), Colwyn Bay (6 miles east), Abergele (11 miles east) and Colwyn Bay (5 miles east).

Around Hendre

Typical jobs here are in homes near Albion Ale House, Ysgol Aberconwy and Ysgol Aberconwy and the streets around them. The nearest railway station is Conwy station, roughly 0.8 miles north-east of the centre. Nearby you’ll also find Conwy Castle (0.9 miles north-east) and Conwy Hospital (1 mile north). Open spaces near Hendre include Bodlondeb Woods and Llyn Pen Ffridd Newydd.

  • Other local spots include Marl (1.8 miles north-east)
Map of Hendre © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.