County Durham · England
Sink Repair in High Forge
Chip, crack and resurfacing work on bathroom sinks and basins for homes and businesses in High Forge and across County Durham. Free, fixed quotes from your pictures.
- Repairs from £95
- Chips around the rim
- Chips on a built-in basin
About our sink repair in High Forge
A chipped basin is one of the most noticeable bits of damage in a bathroom. The chip is filled, shaped and polished so it blends into the glaze. Typical jobs include damage from dropped bottles or hair tools and an original basin worth saving, on antique & period basins, enamelled basins and ceramic & vitreous china basins.
Big or small, you get the same one-year guarantee in High Forge and across County Durham.
- Location
- High Forge (DH9)
- County
- County Durham
- Guarantee
- A year, on every repair
- Quote
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
High Forge and the surrounding area
High Forge is about 2 miles north-east of Stanley, in County Durham. We travel to homes and businesses in High Forge and nearby villages, so nothing has to leave your home. Our technicians cover 329 places across County Durham, from the larger towns to small villages. Our nearest city page is Newcastle upon Tyne, about 7 miles away.
Here we cover the DH9 postcode area. If you are just outside High Forge, we cover Beamish (1 mile south), High Urpeth (1 mile east), West Pelton (1 mile south-east), No Place (1 mile south-west) and High Handenhold (1 mile south-east). Further out, we also cover Durham (8 miles south-east), Consett (8 miles west), Spennymoor (13 miles south), Seaham (12 miles east), Chester-le-Street (3 miles south-east) and Peterlee (15 miles south-east).
Local landmarks in High Forge
Typical jobs here are in homes near The Shepherd & Shepherdess pub, Beamish Primary School and Church of St Paul and the streets around them. The closest station to High Forge is Chester-Le-Street station, about 3.4 miles south-east of the centre. Well-known places in the area include Lambton Castle (4.5 miles east) and Ankers House Museum (3.5 miles south-east).
Do you need sink repair in High Forge?
Fine crazing in the glaze is usually down to age, and strong chemicals speed it up.
The things clients typically mention when they call are:
- Damage to a basin in a vanity unit
- A crack near the taps
- Knocks from hair straighteners
- An antique basin with chips
Comparing quotes
- A fixed quote, and whether VAT is included
- How the room is protected while they work
- Whether a trained technician does the job
- What happens if they find more damage
Should you replace it?
If the basin is cracked right through and leaking, replacement is typically the answer. For chips, surface cracks and crazing, a repair is usually best. Prices start from £95. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Why choose Surface Doctor in High Forge
- Every repair guaranteed for a year
- One price list for the whole UK
- Colour mixed on the day to match
- Fixed prices from your pictures
See our full price list.
For landlords and businesses
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Keep straighteners away from the basin
- Use mild cleaners only
- Avoid abrasive pads
- Fittings shouldn’t be over-tightened
Use gentle cleaners and avoid dropping heavy bottles or appliances into the basin.
A crack near the taps can spread, so get it looked at early. If water is getting through, isolate the basin until it’s seen to.
Places near High Forge
More services for High Forge
How the visit works
We turn up at the time we agreed with you and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a couple of hours for most chips, and the room is left clean and tidy.
- We check the basin is secure and not leaking.
- The area is degreased and keyed.
- We build up the filler and sand it flush.
- Colour and gloss are matched.
- We clear away and tell you when it can be used.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Let us know which floor the room is on
- Plan for the room to be out of bounds to pets and children
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the basin, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Read more
What sink repair costs
Prices start from £95. A fixed quote means you know the cost before booking. We look at:
- What the surface is made of
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
- How many areas need work
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Send photos for a quote
Phone photos are fine. Make sure they show:
- One sharp close-up of the damage
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
- Your postcode, so we can check dates
If you’re in High Forge and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
What we can’t put right
Some jobs are not right for a repair, including:
- Leaking taps or wastes (a plumber’s job)
- A loose basin, until it’s refixed
- Through cracks that let water out
If in doubt, send pictures and we’ll say what we think before booking.
What we work on
- Ceramic & vitreous china basins
- Belfast and butler sinks
- Antique & period basins
- Enamelled basins
- Vanity unit basins
High Forge questions
How soon can you come?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Do you work in High Forge?
Yes, we do. We send a technician to High Forge for every job, with no extra charge for travel.
How do I get a price for sink repair in High Forge?
Repairs from £95. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.
Is there a guarantee?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Is a chipped basin repairable?
Yes, very often. We shape and polish it to match the glaze.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.
