County Durham · England
uPVC Repair for High Forge homes
Damaged window, door or sill in High Forge? We put it right where it is, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Chips and dents
- Holes from removed fittings and alarms
About our uPVC repair in High Forge
We also do snagging repairs for builders. We fill and refinish the damage so it blends into the frame, woodgrain finishes included. Common call-outs are for chips and dents and holes from removed fittings and alarms, across conservatory frames, window frames & sills and white uPVC.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right. Clean with warm soapy water and a soft cloth. Avoid solvents and abrasive cleaners.
- Area
- High Forge (DH9)
- County
- County Durham
- Cover
- One year on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What uPVC repair costs
Prices start from £95. We don’t charge extra for travel to High Forge. The price depends on:
- Any earlier repairs that need removing first
- Access to the area
- How many items we do on one visit
- The colour and finish to match
We charge the same wherever you are, with no extra for High Forge. The job itself decides the price: how much damage, what it’s made of and how many items.
Send pictures for a quote
A couple of clear pictures is all it takes. Try to include:
- Details of any past repairs
- One picture of the entire window, door or sill
- Where you are, by postcode
- Daylight if possible, and no flash reflection
Email us photos of the damage and one of the entire item, with your DH9 postcode, and we’ll reply with a fixed price.
Our work in High Forge
High Forge is about 2 miles north-east of Stanley, in County Durham. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover 329 places across County Durham, from the larger towns to small villages. You can also see our page for Newcastle upon Tyne, about 7 miles away.
Our visits in DH9 work the same way as everywhere else we cover. We also travel to Beamish (1 mile south), High Urpeth (1 mile east), West Pelton (1 mile south-east), No Place (1 mile south-west) and High Handenhold (1 mile south-east). Larger places within reach include Durham (8 miles south-east), Consett (8 miles west), Spennymoor (13 miles south), Seaham (12 miles east), Chester-le-Street (3 miles south-east) and Peterlee (15 miles south-east).
Near you in High Forge
Around High Forge, we work in homes near The Shepherd & Shepherdess pub, Beamish Primary School and Church of St Paul. The closest station to High Forge is Chester-Le-Street station, about 3.4 miles south-east of the centre. Nearby you’ll also find Lambton Castle (4.5 miles east) and Ankers House Museum (3.5 miles south-east).
Landlord and trade work in High Forge
Landlords, letting agents and housing providers in High Forge use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Towns and villages near High Forge
What else we do in High Forge
Why repair rather than replace?
A new window, door or sill costs far more, and it may not match the rest after years of weathering. A repair keeps the original. Repairs from £95, with every job priced individually. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in High Forge
- No extra charge for your area
- Dust sheets down, tidy finish
- Honest advice, even when it means no job
- We come to you, anywhere in the UK
Take a look at our pricing.
Do you need uPVC repair in High Forge?
uPVC is tough but not indestructible: ladders, tools and building work scratch and chip it, candles and cigarettes burn sills, and old fittings leave holes.
Typical reasons for a call-out include:
- Holes from removed fittings and alarms
- Scratches from ladders and furniture
- Chips and dents
- Burns on sills
Questions to ask before booking
- How the colour is matched
- If travel is included in the price
- What happens if the damage is worse than the pictures show
- When it can be used again
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
Honest limits
We will not take on work that will not last, so here’s what a repair cannot put right:
- Failed or misted double glazing units
- Broken locks, hinges or mechanisms
- Frames that are warped or out of square
Send us pictures and we’ll tell you honestly before booking.
What we work on
- White uPVC
- Conservatory frames
- Coloured and woodgrain uPVC
- Doors & door panels
- Window frames & sills
What we do, step by step
You don’t need to empty the room beforehand. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we’re doing. It usually takes a few hours, and you can get on with other things while we’re there.
- We clean the frame or panel.
- Next we fill the damage.
- We sand the repair smooth.
- We match the colour, including woodgrain finishes.
- The repair is blended into the surface around it.
How to prepare
- Tell us if there are stairs or a lift
- Let the surface dry out before the visit
- Plan for the room to be out of bounds to pets and children
How to get a price
Most clients in High Forge get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Related advice
FAQs for High Forge
How do I book?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Is a repair better than a new one?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Can a burnt window sill be fixed?
Yes. The burn is filled and refinished to match.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and we will quote them together.
What does uPVC repair cost?
Prices start from £95. We give a fixed price from your photos. Send a close-up and a picture of the entire item and your postcode.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
About our accreditations · Every repair comes with a one-year guarantee.
