Glasgow · Scotland
Sink & basin repair in Hillhead, Glasgow
Sink repair across Hillhead and nearby, done in a single visit in most cases.
- Repairs from £95
- Damage to a basin in a vanity unit
- Chips on the rim or front edge

Sink repair in Hillhead without replacing anything
We match the glaze as well as the colour, since a matt patch on a glossy basin is obvious. We polish each repair to the basin’s shine. We regularly repair ceramic & vitreous china basins, enamelled basins and vanity unit basins, and common reasons people contact us are crazing in the glaze and cracks starting at the waste.
Every repair is covered by our one-year guarantee, wherever you are in Glasgow.

- Location
- Hillhead (G12, G20, G3)
- Region
- Glasgow
- Guarantee
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Your questions about sink repair in Hillhead
Is there any odour?
Some materials have a smell while they’re applied. It fades as everything cures.
Do you disconnect the taps?
Not at all. We protect the area around it and work in place.
Can a cracked sink be fixed?
In many cases. Photos let us say whether it’s repairable.
Can you quote from pictures?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Do you restore period basins?
Yes. Period basins are worth keeping, and we repair them sympathetically.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
How do I get a price for sink repair in Hillhead?
Prices start from £95. Because every job differs, we price from pictures. You will get a fixed figure before booking.
When a repair is not the answer
It helps to know what we cannot do too:
- Widespread crazing
- A basin coming away from the wall (that needs refixing)
- Leaks from the fittings
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Ceramic & vitreous china basins
- Enamelled basins
- Belfast and butler sinks
- Antique & period basins
- Vanity unit basins
Repair or replace: which is better?
A basin is normally fixed into a unit or tiled around, so changing one disturbs the surroundings. Repairing it keeps everything as it is. Prices start from £95. Set against the cost of replacement, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why Hillhead customers choose us
- Colour mixed on the day to match
- Every repair guaranteed for a year
- Work done at your home or business
- No extra charge for your area
Read our pricing.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
How it works
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Allow a couple of hours for most chips. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- We start by cleaning the basin and assessing the damage.
- Next we fill the damage and shape it to the basin’s profile.
- We colour-match the finish to the glaze.
- The repair is polished so it blends in.
- The basin can generally be used later that day or the day after.
Preparing for the visit
- Let us know if it has been repaired before
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Advice
How we price sink repair
Prices start from £95. Each job gets its own fixed quote. This is what makes a difference:
- The type of damage
- The material and finish
- How hard the colour is to match
- How easy the damage is to reach
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Getting a price from pictures
It only takes a minute to photograph the damage. Try to send:
- One sharp close-up of the damage
- Natural light rather than flash
- The material, if you know it
- One picture of the whole basin
Most clients in Hillhead get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Landlord and trade work in Hillhead
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Clean with a soft cloth and mild detergent
- Use mild cleaners only
- Don’t stand heavy bottles on the edge
- Repair chips before they stain
Clean with mild, non-abrasive cleaners and take care with heavy bottles and hair tools.
Chips collect dirt and stain over time, so repairing them early keeps the job simple.
Places near Hillhead
What else we do in Hillhead
Different materials, different repairs
Composite and resin
Cast mineral and resin basins are common in vanity units. Chips and scratches can be filled and matched, with colour mixed on site.
Vitreous china
Ceramic basins have a hard, glassy glaze. The gloss is what makes a repair blend in, so we polish the repair to suit.
Hillhead and nearby
Hillhead is about 1 mile north of Glasgow, in Glasgow. Wherever you are in the G12 postcode area, a technician comes to you. We cover 183 places across Glasgow.
Postcode districts we cover here: G12, G20 and G3. From Kew Lane, Ford Road and Eton Lane or a nearby road, a technician can come to you. We also travel to Kelvinbridge (1 mile east), Woodlands (1 mile south-east), North Kelvinside (1 mile north-east), Woodside (1 mile east) and Yorkhill (1 mile south-west). Further out, we also cover Calton (3 miles south-east), Langside (3 miles south), Yoker (4 miles west), Mount Florida (4 miles south), Hillpark (4 miles south) and Shawlands (3 miles south). Hillhead is one of the larger places we cover in Glasgow.
Landmarks near Hillhead
Locally, our jobs take us to homes close to Glasgow University Library, College of Piping and Kelvingrove Park, among other places. Nearby too are Curlers Rest pub (less than half a mile west), Hillhead High School (less than half a mile east), Church Street Primary School (0.5 miles south-west) and Wellington Church (under half a mile south). For rail, the closest station is Partick station, about 0.9 miles west. Other landmarks nearby include Chinatown (1.1 miles east) and Glasgow Museum of Transport (0.5 miles south-west). Not far away are Castle Hill and Kilmardinny.
About our accreditations · Every repair comes with a one-year guarantee.

