Tameside · England

Sink & basin repair in Hyde, Tameside

We travel to Hyde for chip, crack and resurfacing work on bathroom sinks and basins. Nothing is taken out, and the work is guaranteed.

  • Repairs from £95
  • A crack near the taps
  • A crazed, tired basin
Surface Doctor technician refinishing the outside of a roll-top bath

Sink repair in Hyde

For landlords and businesses

If you manage property in Hyde, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.

We regularly work with letting and managing agents. Send the address, pictures and access details and we will arrange it.

How we handle sink repair in Hyde

When a basin is worn or crazed all over, it can be resurfaced in place, for a fresh, even finish. If you are dealing with an antique basin with chips and fine cracks across the glaze, we can generally put it right.

You get a one-year guarantee, the same in Hyde as everywhere else we work.

Basin with yellowed glaze resurfaced to a clean white finish
Where
Hyde (SK14, SK16)
Area hub
Tameside
Cover
12 months on all our work
Quote
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Last updated
23 October 2026

Prices and what affects them

Prices start from £95. There’s no charge for travel to Hyde. The price depends on:

  • How many items we do on one visit
  • How hard the colour is to match
  • Access to the area
  • How many areas need work

The price reflects the work involved, not your postcode. The full price is agreed before you book, with nothing added on the day.

How to get a fixed quote

The better the photos, the more accurate the price. Here’s what helps:

  • Any earlier repairs or coatings
  • What it’s made of, if you know
  • One picture of the whole basin
  • A coin beside the damage so we can judge size

Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed price. There is no charge for the quote and you are under no obligation.

Hyde and the surrounding area

Hyde is about 5 miles north-east of Stockport, in Tameside. Anywhere in SK14, a technician comes to you. We work in all 32 towns and villages across Tameside, from the larger towns to small villages. You can also see our page for Manchester, about 6 miles away.

Every address in SK14 and SK16 is within our area. Local streets include Market Street, High Street and Station Road, and we cover them all. Main roads around Hyde include the A57 and A560, which makes travel easy. Nearby, we also work in Flowery Field (1 mile north-west), Newton (1 mile north-west), Gee Cross (1 mile south), Newton Wood (1 mile north-west) and Backbower (2 miles south). Within a short drive, we also cover Ashton-under-Lyne (3 miles north), Stalybridge (3 miles north-east), Droylsden (4 miles north-west), Audenshaw (3 miles north-west), Hurst (3 miles north) and Mossley (5 miles north). Hyde is one of the larger places we cover in Tameside.

Near you in Hyde

Around Hyde, we work in homes near Olde Town House, Hyde Park and Endeavour Primary Academy and the streets around them. Other local landmarks include Hyde High School (0.7 miles north-west) and Church of St Thomas (under half a mile south-east). Hyde has its own railway station: Newton for Hyde station. Nearby you’ll also find Portland Basin Museum (2.4 miles north-west) and Tameside General Hospital (2.9 miles north). Green spaces nearby include Werneth Low and Eastwood Nature Reserve.

  • Local facilities include Hyde Newton (0.6 miles north)
Map of Hyde © OpenStreetMap contributors

Questions from Hyde

Can you quote from pictures?

Yes, almost always. A close-up and a wider photo are enough to give a fixed price.

Is there any odour?

There can be some smell while we work, so we ventilate the room. It clears as the materials cure.

Do you charge for travel?

No. Our quotes include travel, with the same prices everywhere we work.

Can I add another job to the visit?

Of course, and it normally saves money. Send pictures of everything together and you’ll get one combined price.

Is it messy?

No. The work area is masked and covered, and we leave the room clean.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

I rent my home. Can I book you?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Can you repair something that’s been repaired before?

Generally, yes. Let us know what was used before.

Keeping it looking good

Good habits make a big difference to how long a repair lasts:

  • Get chips repaired early
  • Clean with a soft cloth and mild detergent
  • Do not overtighten taps
  • Store toiletries on a shelf

A quick wipe after use helps, and steer clear of harsh chemicals.

A crack near the taps can spread, so get it looked at early. If it’s leaking, turn off the water to the basin until it’s checked.

What happens on the day

The work is clean and fairly quiet. We protect the area first, then the work takes a morning or an afternoon. At the end we talk you through the curing time and the aftercare.

  1. First the basin is cleaned and the damage checked.
  2. The chip or crack is filled and shaped to match the basin.
  3. We colour-match the finish to the glaze.
  4. The repair is polished so it blends in.
  5. The basin can normally be used later that day or the next day.

Getting ready for the visit

  • Have a window or extractor fan available
  • Move bottles, mats and clutter away from the area
  • Let us know about parking or access

Get a quote

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

Get a free quote

Advice

Repair or replace: which is better?

A basin is usually fixed into a unit or tiled around, so replacing one disturbs more than you’d expect. A repair avoids that. Repairs from £95, with every job priced individually. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.

What you get with us

  • Free fixed quotes from pictures
  • Accredited with CHAS, Constructionline and SafeContractor
  • We come to you, anywhere in the UK
  • We leave the room as we found it

Take a look at our full price list.

Different materials, different repairs

Composite and resin

Cast mineral and resin basins are common in vanity units. Chips and scratches can be filled and matched, and the colour is mixed to suit.

Vitreous china

Ceramic basins have a fired, glassy surface. Repairs are polished to match that glaze.

Common problems we fix in Hyde

Fittings tightened too hard strain the basin, which can crack it around the holes.

Customers generally contact us about:

  • Knocks from hair straighteners
  • Chips around the rim
  • Fine cracks across the glaze
  • Chips on a built-in basin

Before you book anyone

  • Whether the colour is mixed to match
  • What aftercare is recommended
  • Whether cleaning and preparation are in the price
  • Who turns up on the day

Choosing a repair company

When a repair isn’t the answer

Honesty matters more than a booking, so here’s what a repair will not do:

  • A loose basin, until it’s refixed
  • Crazing all over, which suits resurfacing
  • A crack that leaks right through the basin

Send us pictures and we’ll tell you honestly before booking.

Materials we repair

  • Ceramic & vitreous china basins
  • Vanity unit basins
  • Enamelled basins
  • Antique & period basins
  • Belfast and butler sinks
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.