Dorset · England

Sink & basin repair in Lower Ansty, Dorset

Sink repair for Lower Ansty, without a refit. Send us pictures for a fixed price, then we come to you.

  • Repairs from £95
  • A chipped vanity basin
  • Damage from dropped bottles or hair tools
Surface Doctor technician refinishing the outside of a roll-top bath

Book sink repair in Lower Ansty

Repairs by material

Period and antique

Period basins frequently have marks and character worth keeping. We repair them sympathetically and leave the character intact.

Composite and resin

Many vanity units have resin or composite basins. Chips and scratches can be filled and matched, with colour mixed on site.

Sink repair in Lower Ansty, done in place

Period basins are worth keeping, and we work around makers’ marks wherever possible. A like-for-like replacement can be hard to find. Whether it’s crazing in the glaze and an original basin worth saving, we can help.

Every job is backed for twelve months. If something goes wrong with the work, we come back.

Area
Lower Ansty (DT2)
Area hub
Dorset
Guarantee
A year, on every repair
Price
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Updated
23 October 2026
Ceramic basin shown before and after repair

Where we work around Lower Ansty

Lower Ansty is about 8 miles west of Blandford Forum, in Dorset. From the centre of Lower Ansty to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Lower Ansty is one of 462 towns and villages in Dorset where we work.

Every address in DT2 is covered, from the main roads to the quietest streets. You will find streets such as Hartfoot Lane and Cothayes Drove, all of which we cover. We also cover the places around Lower Ansty: Ansty (1 mile south-west), Melcombe Bingham (1 mile south-west), Higher Ansty (1 mile north-east), Little Ansty (1 mile north) and Cross Lanes (1 mile south-west). We also work in nearby towns such as Dorchester (9 miles south-west), Blandford Forum (8 miles east), Gillingham (15 miles north), Shaftesbury (14 miles north-east), Sherborne (12 miles north-west) and Corfe Mullen (14 miles east).

Landmarks near Lower Ansty

Locally, our jobs take us to homes close to Church of St Andrew and Milton Abbey School and the streets around them. Other landmarks nearby include Brewery Farm Museum (2.6 miles east). Open spaces near Lower Ansty include Bulbarrow Hill.

Map of Lower Ansty © OpenStreetMap contributors

Repair or replace: which is better?

A basin is usually fixed into a unit or tiled around, so replacing one disturbs more than you’d expect. Repairing it keeps everything as it is. Prices start from £95. Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Why us?

  • One visit for most repairs
  • A fixed quote before you book
  • No need to remove anything
  • Work done at your home or business

See our prices page.

Aftercare tips

After the repair has cured, a few habits help it last:

  • Repair chips before they stain
  • Avoid strong bleach and descalers
  • Keep heavy bottles off the rim
  • Ask a plumber not to overtighten fittings

Treat the basin gently for the first few days, then stick to mild cleaners. Keep heavy bottles and hot tools away from the rim.

Cracks by the tap holes can grow, so it’s worth having it checked quickly. If water is getting through, isolate the basin until it’s seen to.

Common questions in Lower Ansty

What information do you need?

Send pictures through the quote form or call 0345 017 0787, and we will take it from there.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Does someone need to be in?

Someone needs to let us in and show us the job. You do not need to watch us work.

How soon can you come?

It depends on the time of year and where you are. We’ll offer you dates when we send your quote.

It’s been repaired before. Can you still fix it?

Most of the time. Let us know what was used before and we will plan for it.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Do you restore period basins?

Yes. Where possible, we work around makers’ marks. Mention it when you ask for a quote.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.

Should I try a DIY kit first?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.

Landlords, agents and businesses in Lower Ansty

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

Prices and what affects them

Repairs from £95. Prices are worked out job by job, from your photos. The main factors are:

  • What kind of damage it is
  • What the surface is made of
  • How many items we do on one visit
  • Whether old repairs or coatings need taking off

We charge the same wherever you are, so there’s no premium for Lower Ansty. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Getting a price from pictures

Photographing the damage takes a minute. Please include:

  • A clear, close picture of the problem area
  • What it’s made of, if you know
  • A coin beside the damage so we can judge size
  • Natural light rather than flash

Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed quote back. Quotes are free and you’re under no obligation.

What we do, step by step

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes a few hours. We clean up when we’re done and let you know when you can use it again.

  1. We start by cleaning the basin and assessing the damage.
  2. Next we fill the damage and shape it to the basin’s profile.
  3. We mix the colour to suit the glaze.
  4. We polish it into the surrounding surface.
  5. The basin can usually be used later that day or the next day.

How to prepare

  • Let us know about parking or access
  • Let us know which floor the room is on
  • Mention any earlier repairs or resurfacing

How to get a price

Getting a quote takes a couple of minutes: photograph the damage, then the whole basin, add your postcode and send them over. You will get a fixed price, not an estimate.

Send photos for a quote

Related advice

When we would advise against a repair

A repair is not always the answer, and we’ll tell you before we start. We can’t fix:

  • A basin that moves on its brackets
  • Crazing all over, which suits resurfacing
  • Leaks from the fittings

If in doubt, send photos and we’ll say what we think.

Materials we repair

  • Belfast and butler sinks
  • Ceramic & vitreous china basins
  • Vanity unit basins
  • Enamelled basins
  • Antique & period basins
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.