Wiltshire · England
Sink Repair for Slaughterford homes
Sink repair in Slaughterford without the cost of replacing. Send us pictures for a fixed price, then we come to you.
- Repairs from £95
- Fine cracks across the glaze
- Chips on a built-in basin
About our sink repair in Slaughterford
It’s not just the colour we match, it’s the gloss, since a matt patch on a glossy basin is obvious. We polish each repair to the basin’s shine. We are frequently asked to fix a period basin that needs restoring and fine cracks across the glaze, on ceramic & vitreous china basins, antique & period basins and enamelled basins.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll sort it.
- Location
- Slaughterford (SN14)
- County
- Wiltshire
- Guarantee
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How we price sink repair
Prices start from £95. We charge the same across the UK, including Slaughterford. The price reflects:
- How many items we do on one visit
- How much damage there is
- Unusual colours or finishes
- Where the damage is and how we get to it
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send photos for a quote
The better the photos, the more accurate the price. Here’s what helps:
- Natural light rather than flash
- The material, if you know it
- A picture taken from further back
- Any earlier repairs or coatings
Upload pictures of the damage and one of the whole item, with your SN14 postcode, and we’ll reply with a fixed quote.
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Slaughterford and the surrounding area
Slaughterford is about 4 miles west of Chippenham, in Wiltshire. Jobs in Slaughterford are booked in like any other job: a fixed quote from photos, then a visit to do the work. Slaughterford is one of 425 places in Wiltshire we cover. Our nearest city page is Birmingham, about 71 miles away.
All of SN14 is within our area, from the main roads to the quietest streets. Nearby, we also work in Ford (1 mile north), Biddestone (1 mile east), Thickwood (1 mile south-west), Castle Combe (2 miles north) and Upper Castle Combe (2 miles north). We also work in nearby towns such as Trowbridge (10 miles south), Chippenham (4 miles east), Calne (10 miles east), Devizes (13 miles south-east), Westbury (14 miles south) and Melksham (7 miles south-east).
Local landmarks in Slaughterford
Typical jobs here are in homes near Church of St Nicholas and the streets around them. For rail, the closest station is Chippenham station, roughly 4.8 miles east. Well-known places in the area include Chippenham Community Hospital (4.4 miles east) and Castle Combe Museum (2.1 miles north). Green spaces nearby include Vincients Wood.
Should you replace it?
A basin is generally fixed into a unit or tiled around, so replacing one disturbs more than you’d expect. A repair avoids that. Repairs from £95, with every job priced individually. There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Everything repaired in place
- Typically one visit, start to finish
- Fixed prices from your photos
- Colours mixed by hand to suit your surface
See our full price list.
Places near Slaughterford
Also in Slaughterford
How the visit works
We turn up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take a few hours, and the room is left clean and tidy.
- The vanity, floor and taps are protected.
- The damage is cleaned and prepared.
- It’s filled and shaped to the basin.
- We match the colour by hand.
- The repair is polished to the basin’s gloss and left to cure.
Preparing for the visit
- Keep a parking space free if you can
- Tell us if there are stairs or a lift
- Clear toiletries, mats and anything else from around the area
Ask for a price
The quickest way to a price is to send two or three photos through our quote form or call us. We will say right away if a repair is the right fix.
Advice
How to look after the repair
Once the work has cured, treat it gently:
- Clean with a soft cloth and mild detergent
- Avoid strong bleach and descalers
- Use a heat mat for hair tools
- Keep heavy bottles off the rim
Use gentle cleaners and take care with heavy bottles and hair tools.
Chips collect dirt and stain over time, so repairing them early keeps the job simple.
What we are called out for in Slaughterford
Fittings tightened too hard strain the basin, and cracks can start at the tap holes.
The things clients generally mention when they call include:
- Cracks around the tap holes or waste
- Damage from dropped bottles or hair tools
- A period basin that needs restoring
- A chipped vanity basin
What to look for in a quote
- A fixed quote, and whether VAT is included
- What happens if the damage is worse than the photos show
- How your room will be protected
- What prep work is covered
When we’d advise against a repair
We’ll always be straight with you, so here’s what a repair cannot fix:
- Leaking taps or wastes (a plumber’s job)
- A basin coming away from the wall (that needs refixing)
- A basin cracked through and leaking
If in doubt, send photos and we will say what we think before you book.
Materials we repair
- Belfast and butler sinks
- Enamelled basins
- Antique & period basins
- Vanity unit basins
- Ceramic & vitreous china basins
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
Your questions about sink repair in Slaughterford
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children.
Is there a guarantee?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Is there any odour?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Wiltshire.
Which areas do you work in?
All of Wiltshire, and the rest of the UK. Travel is included in the price.
How soon can you come?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
About our accreditations · Every repair comes with a one-year guarantee.
