Staffordshire · England

uPVC window & door repair in Anslow, Staffordshire

uPVC repair in Anslow without the cost of replacing. Get a fixed price from your pictures, then we come to you.

  • Repairs from £95
  • Holes from removed fittings and alarms
  • Chips and dents
Surface Doctor technician repairing a wooden kitchen worktop

UPVC repair in Anslow

How we handle uPVC repair in Anslow

Builders and developers use us for snagging repairs too. The damage is filled and refinished to match the frame, woodgrain finishes included. Typical jobs include holes from removed fittings and alarms and scratches from ladders and furniture, across white uPVC, doors & door panels and coloured and woodgrain uPVC.

Big or small, it’s backed by a one-year guarantee in Anslow and across Staffordshire. Clean with warm soapy water and a soft cloth. Avoid solvents and abrasive cleaners.

Before and after: a chipped white edge filled and refinished
Where
Anslow (DE13)
County
Staffordshire
Guarantee
One year on every repair
Quotes
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Last updated
23 October 2026

Where we work around Anslow

Anslow is about 2 miles north-west of Burton upon Trent, in Staffordshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Anslow is one of 512 towns and villages in Staffordshire where we work. Our jobs stretch from Anslow to Birmingham (26 miles away).

Postcode districts we cover here: DE13. We regularly work on streets such as Main Street, Main Road and Bushton Lane. We also travel to Anslow Common (1 mile south-west), Alder Moor (1 mile north-east), Horninglow (2 miles east), Tutbury (2 miles north) and Rolleston on Dove (2 miles north-east). Within a short drive, we also cover Tamworth (14 miles south), Lichfield (12 miles south-west), Rugeley (12 miles south-west), Burntwood (14 miles south-west), Uttoxeter (9 miles north-west) and Stowe (11 miles south-west).

Landmarks near Anslow

Our clients here include homes close to John Taylor Free School, The Mosley Academy and Church of the Holy Trinity, among other places. The closest station to Anslow is Burton-On-Trent station, roughly 2.2 miles south-east of the centre. A little further out are Cooper's Square (2.7 miles south-east) and Tutbury Museum (2.1 miles north). Green spaces nearby include Brankley Pastures.

Map of Anslow © OpenStreetMap contributors

Work for landlords and builders

Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

For anyone letting property in or around Anslow, we can repair and quote for several addresses together. Send pictures for each one and we’ll price them together.

Common problems we fix in Anslow

uPVC is hard-wearing, but it does get damaged: ladders and building work leave scratches and chips, candles and cigarettes burn sills, and old fittings leave holes.

People generally call us after spotting one of these:

  • Damage during building work
  • Chips and dents
  • Scratches from ladders and furniture
  • Holes from removed fittings and alarms

What your quote should include

  • How the room is protected while they work
  • Whether cleaning and preparation are in the price
  • When it can be used again
  • What happens if they find more damage

How to compare quotes

Should you replace it?

Replacing the frame or sill is a much bigger job, and it may not match the rest after years of weathering. A repair leaves the unit in place. Our uPVC repair starts from £95. We charge the same wherever you are, so there is no premium for Anslow. What changes the price is the job itself: the material, the amount of damage and how many items.

What you get with us

  • Straight answers about what a repair can do
  • Normally one visit, start to finish
  • Rooms protected and left tidy
  • Nothing taken out or refitted

See our full price list.

DIY repairs versus a professional job

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.

Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.

Prices and what affects them

Prices start from £95. You’ll know the full cost before booking. We look at:

  • Unusual colours or finishes
  • How much damage there is
  • What the surface is made of
  • The type of damage

Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.

Quotes from your pictures

Phone pictures are fine, there is no need for anything special. Ensure they show:

  • Your postcode, so we can check dates
  • Good light, ideally daylight, without flash glare
  • A close-up of the damage, in focus
  • Details of any past repairs

There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.

What we cannot put right

A few problems are outside what a surface repair can do:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

Not sure? Send photos and we’ll give you a straight answer before you book.

What we work on

  • Conservatory frames
  • White uPVC
  • Coloured and woodgrain uPVC
  • Doors & door panels
  • Window frames & sills

Common questions in Anslow

Is there any odour?

There can be some smell while we work, which is why we ventilate. It clears as the materials cure.

Do you charge for travel?

There is no separate call-out charge. Your fixed price includes everything.

Can you repair a burn on a uPVC sill?

Yes. We fill and refinish the burnt area to match.

Are you a vetted contractor?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Will it make a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Will the price change on the day?

If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.

Can pets and children be at home?

We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.

How it works

You do not need to empty the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. It typically takes a few hours, and you are welcome to carry on with your day while we work.

  1. We start by cleaning the frame.
  2. Scratches, chips and holes are filled.
  3. We sand the repair smooth.
  4. We colour-match the finish, including woodgrain effects.
  5. We blend the repair into the surrounding surface.

How to prepare

  • Have somewhere for us to park nearby if possible
  • Keep children and pets away from the room on the day
  • Mention any parking restrictions or tricky access

Getting a price

If you are in Anslow and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.

Get a free quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.