Shropshire · England
uPVC Repair in Blore
Fixed-price uPVC repair in Blore and the surrounding area, normally in one visit and guaranteed for a year.
- Repairs from £95
- Scratches from ladders and furniture
- Holes from removed fittings and alarms
How we handle uPVC repair in Blore
We fill and refinish the damage so it blends into the frame, woodgrain finishes included. Builders and developers use us for snagging repairs too. Common call-outs are for chips and dents and holes from removed fittings and alarms, across doors & door panels, coloured and woodgrain uPVC and white uPVC.
A one-year guarantee comes with the work, just as it does everywhere we cover. Clean with warm soapy water and a soft cloth. Avoid solvents and abrasive cleaners.
- Where
- Blore (TF9)
- Area hub
- Shropshire
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs in Shropshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
How we price uPVC repair
Repairs from £95. There is no area surcharge for Blore. What changes the price is:
- Unusual colours or finishes
- Whether we combine several jobs
- What kind of damage it is
- Where the damage is and how we get to it
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what to send:
- Good light, ideally daylight, without flash glare
- Any earlier repairs or coatings
- Something in shot to show the size
- What it’s made of, if you know
Send us a picture of the damage and one of the whole item, and tell us you’re in Blore, and we will come back with a fixed quote.
What we are called out for in Blore
uPVC is tough but not indestructible: ladders, tools and building work scratch and chip it, candles and cigarettes burn sills, and old fittings leave holes.
Customers usually contact us about:
- Damage during building work
- Burns on sills
- Holes from removed fittings and alarms
- Scratches from ladders and furniture
What your quote should include
- What happens if they find more damage
- How the colour is matched
- A fixed price, and whether VAT is included
- Whether there are any call-out or travel charges
Repair or replace in Blore?
Replacing the frame or sill is a much bigger job, and new uPVC may not match the weathered frames around it. A repair leaves the unit in place. Prices start from £95. We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why choose Surface Doctor in Blore
- Free fixed quotes from pictures
- Colour mixed on the day to match
- Honest advice, even when it means no job
- No extra charge for your area
Take a look at our prices page.
Blore and the surrounding area
Blore is about 3 miles east of Market Drayton, in Shropshire. Jobs in Blore are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Blore is one of 433 towns and villages in Shropshire we cover. We work right across the region, from Blore to Birmingham (about 37 miles away).
All of TF9 is within our area, from the main roads to the quietest streets. If you’re just outside Blore, we cover Hales (1 mile south-west), Almington (1 mile west), Mucklestone (2 miles north), Betton (2 miles north-west) and Napley (2 miles north). Within a short drive, we also cover Market Drayton (3 miles west), Whitchurch (12 miles west), Wem (13 miles west), Shawbury (13 miles south-west), Prees Higher Heath (10 miles west) and Hinstock (5 miles south).
Landmarks near Blore
Our customers here include homes close to Church of St Mary and the streets around them. A little further out are Cheswardine Castle (2.8 miles south) and Market Drayton Museum And Resource Centre (2.9 miles west).
Places near Blore
More services for Blore
When we would advise against a repair
Not everything can be repaired, and we will tell you before we start. Repairs won’t solve:
- Failed or misted double glazing units
- Broken locks, hinges or mechanisms
- Frames that are warped or out of square
If in doubt, send pictures and we will say what we think before booking.
Materials we repair
- Coloured and woodgrain uPVC
- Window frames & sills
- Conservatory frames
- Doors & door panels
- White uPVC
Blore: your questions answered
Is a repair better than a new one?
Typically, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Can you do more than one item on the same visit?
Of course, and it usually saves money. Send pictures of everything together and you will get one combined price.
Can I get a quote without a visit?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
How do I get a price for uPVC repair in Blore?
Prices start from £95. We give a fixed price from your pictures. Send a close-up and a photo of the entire item with your TF9 postcode.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Can you redo someone else’s repair?
In most cases. The old repair comes out first.
Which areas do you work in?
We work UK-wide, and that includes Blore. Prices do not change with location.
How the visit works
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours. We tidy up before we leave and tell you when it’s ready to use.
- We clean the frame or panel.
- Next we fill the damage.
- The repair is sanded smooth.
- The finish is colour matched, woodgrain included.
- Finally we blend it into the rest of the frame.
How to prepare
- Let us know about parking or access
- Clear toiletries, mats and anything else from around the area
- Have somewhere for us to park nearby if possible
Getting a price
Most customers in Blore get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
