Shropshire · England
Worktop repair in Blore, Shropshire
Worktop repair for Blore, without a refit. Send us pictures for a fixed quote, then book a visit.
- Repairs from £95
- Chips caused during installation
- A heat mark or burn
About our worktop repair in Blore
We repair worktops in place. Most repairs take a few hours, and the worktop can be used again soon after. Common call-outs are for a chipped edge and knife marks, in solid wood, laminate and granite & marble.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Blore (TF9)
- County
- Shropshire
- Warranty
- One year on every repair
- Quote
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Our work in Blore
Blore is about 3 miles east of Market Drayton, in Shropshire. We travel to clients in Blore, so nothing has to leave your home. We cover 433 places in Shropshire. We work right across the region, from Blore to Birmingham (37 miles away).
Jobs in TF9 are booked in the same way as anywhere else. Nearby, we also work in Hales (1 mile south-west), Almington (1 mile west), Mucklestone (2 miles north), Betton (2 miles north-west) and Napley (2 miles north). Further out, we also cover Market Drayton (3 miles west), Whitchurch (12 miles west), Wem (13 miles west), Shawbury (13 miles south-west), Prees Higher Heath (10 miles west) and Hinstock (5 miles south).
Local landmarks in Blore
Locally, our jobs take us to homes close to Church of St Mary and the streets around them. A little further out are Cheswardine Castle (2.8 miles south) and Market Drayton Museum And Resource Centre (2.9 miles west).
How the visit works
Visits start with a quick look at the job together. Then the area is sheeted and masked and the work begins. You can expect it to take a few hours, and we will keep you posted as we go.
- We assess the damage and the worktop material.
- The area is cleaned and the edges of the damage prepared.
- A filler that suits the material goes in, and missing edges are rebuilt.
- The colour and pattern are matched by hand.
- Finally we seal or finish the area to match.
Before we arrive
- Mention any parking restrictions or tricky access
- Clear the area around the damage
- Keep a parking space free if you can
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole worktop, we can give you a fixed price.
Related advice
How to look after the repair
To keep it looking its best for years:
- Wipe up spills quickly
- Never put hot pans down directly
- Watch the edges with heavy pans
- Don’t cut directly on the worktop
Let the repair cure for the time we give you before putting anything heavy or hot on it. After that, trivets and chopping boards protect it best.
Daily use can make burns and chips worse particularly around the sink. An earlier repair is a smaller repair.
Other services in Blore
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What affects the price in Blore
Repairs from £95. We price every job individually, from your pictures. The main factors are:
- What kind of damage it is
- How easy the damage is to reach
- How many items we do on one visit
- How much damage there is
We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed price
It only takes a minute to photograph the damage. Please include:
- A clear, close picture of the problem area
- Any earlier repairs or coatings
- Where you are, by postcode
- Daylight if possible, and no flash reflection
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Why repair rather than replace?
Replacing even one length of worktop means templating, cutting, fitting and frequently a new sink and hob connection. A repair takes a few hours and leaves everything in place. Repairs from £95, with every job priced individually. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.
Why us?
- A fixed quote before booking
- Straight answers about what a repair can do
- We come to you, anywhere in the UK
- Most jobs done in one visit
Take a look at our full price list.
What we’re called out for in Blore
The worst damage frequently happens in a moment: a hot pan put down without a trivet, or a heavy pan knocked against the edge. Scratches build up gradually from knives and grit.
Common reasons people in Blore contact us are:
- Chips in quartz or granite
- Chipped corners
- Burns from hot pans
- Cuts and scratches in the surface
Comparing quotes
- How the colour is matched
- What aftercare is recommended
- Is the price fixed, and does it include VAT?
- What happens if they find more damage
Landlords, agents and businesses in Blore
Landlords, letting agents and housing providers in Blore use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
When a repair is not the answer
A repair isn’t right for every job, for example:
- A worktop that has moved because its support has failed
- Laminate swollen by water from underneath
- Deep heat discolouration in quartz, which may not fully disappear
Send us pictures and we will tell you honestly before you book.
Materials we work on in Blore
- Solid surface (such as Corian)
- Quartz
- Solid wood
- Laminate
- Granite & marble
Questions from Blore
Can you quote from pictures?
In nearly every case. If pictures don’t show enough, we will ask for another angle.
Is there any odour?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
How much do I need to move?
Just clear the area around the damage. The rest is covered and protected.
Are there extra charges for Blore?
No. Our quotes include travel, with the same prices everywhere we work.
Will the repair match a patterned worktop?
We match colour, flecks and veining by hand, so the repair blends into the surface.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
About our accreditations · Every repair comes with a one-year guarantee.
