Cheshire East · England

uPVC Repair in Burland

Our technicians come to Burland for scratch, chip, burn and hole repairs to uPVC windows, doors and sills. Nothing is taken out, and the work is guaranteed.

  • Repairs from £95
  • Chips and dents
  • Damage during building work
Surface Doctor technician repairing a wooden kitchen worktop

UPVC repair in Burland

Repairing versus replacing in Burland

A new window, door or sill is a much bigger job, and new uPVC may not match the weathered frames around it. A repair leaves the unit in place. Repairs from £95, with every job priced individually. Compared with replacing, repairing usually costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Why book with us

  • Everything repaired in place
  • CHAS, Constructionline and SafeContractor accredited
  • One-year guarantee on every repair
  • Straight answers about what a repair can do

See our pricing.

How we handle uPVC repair in Burland

We fill and refinish the damage so it blends into the frame, including woodgrain finishes. Builders and developers use us for snagging repairs too. Common call-outs are for damage during building work and burns on sills, on white uPVC, window frames & sills and doors & door panels.

We guarantee the work for a year. If something is not right in that time, we come back and put it right. Clean with warm soapy water and a soft cloth. Avoid solvents and abrasive cleaners.

White panel with a damaged edge, shown before and after repair
Where
Burland (CW5)
Region
Cheshire East
Guarantee
One year on every repair
Quotes
From £95. Fixed and free, based on photos
Call
0345 017 0787
Last updated
23 October 2026

Honest limits

A few problems are outside what a surface repair can do:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

Send us pictures and we’ll tell you honestly.

Surfaces we repair

  • Doors & door panels
  • Conservatory frames
  • Window frames & sills
  • White uPVC
  • Coloured and woodgrain uPVC

About Burland

Burland is about 2 miles west of Nantwich, in Cheshire East. Wherever you are in the CW5 postcode area, we carry out the work at your property. Our repair technicians cover all 254 towns and villages in Cheshire East. You can also see our page for Liverpool, about 27 miles away.

Every address in CW5 is covered, from the main roads to the quietest streets. Local streets include Wrexham Road and Shores Lane, and we cover them all. Nearby, we also work in Swanley (1 mile south), Burford (1 mile north-east), Acton (1 mile east), Stoneley Green (1 mile south) and Ravensmoor (2 miles south). We also work in nearby towns such as Crewe (5 miles east), Middlewich (9 miles north-east), Sandbach (10 miles north-east), Coppenhall (6 miles north-east), Holmes Chapel (12 miles north-east) and Leighton (5 miles north-east).

Near you in Burland

Typical jobs here are in homes near Acton Church of England Primary Academy, St Mary's Church and Malbank School and Sixth Form College and the streets around them. For rail, the closest station is Nantwich station, about 2.4 miles east. Further afield, we also cover the area around Nantwich Workhouse (2.2 miles east) and Nantwich Castle (2.1 miles east).

Map of Burland © OpenStreetMap contributors

What we are called out for in Burland

uPVC is hard-wearing, but it does get damaged: ladders, tools and building work scratch and chip it, candles and cigarettes burn sills, and removed fittings leave holes.

You may need us if you’ve spotted:

  • Burns on sills
  • Scratches from ladders and furniture
  • Holes from removed fittings and alarms
  • Damage during building work

What your quote should include

  • A fixed quote, and whether VAT is included
  • What happens if the damage is worse than the pictures show
  • What prep work is covered
  • Whether the price covers travel

Our hiring checklist

What affects the price in Burland

Repairs from £95. Every quote is fixed and free. What we look at:

  • The material
  • How many areas need work
  • How easy the damage is to reach
  • What kind of damage it is

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Quotes from your photos

Two or three clear photos are normally enough. Try to include:

  • A coin or ruler next to the damage for scale
  • Any details about the material
  • A close-up of the damage, in focus
  • The postcode, so we can plan the visit

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.

Should I try a DIY kit first?

If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

Burland: your questions answered

Do I need to be at home?

We need someone to let us in. After that, you can carry on with your day.

Will you leave a mess?

Dust sheets and masking go down before we start, and we clean up when we have finished.

Can you repair a burn on a uPVC sill?

Yes. We fill and refinish the burnt area to match.

Do you cover the entire of Cheshire East?

Across the UK, so Burland is covered. Prices do not change with location.

Is the work guaranteed?

Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.

Will the price change on the day?

Your quote covers the damage in the pictures. If there is more, we’ll tell you before starting.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Can tenants book a repair?

Yes. Ask your landlord first, and we can send them the quote if that helps.

What happens on the day

On the day itself, there is little for you to do. Show us the job, point us to the room, and we will get on with it. Most visits take a few hours.

  1. We clean the frame or panel.
  2. Scratches, chips and holes are filled.
  3. We smooth the repair.
  4. We match the colour, including woodgrain finishes.
  5. We blend the repair into the surrounding surface.

Preparing for the visit

  • Mention if the room is upstairs or in a flat
  • Point us to the nearest place to park
  • Open a window if you can

Ask for a price

A quote takes minutes to ask for: take one close-up and one wider shot of the window, door or sill, add your postcode and send them to us. What comes back is a fixed quote, not a guess.

Get a fixed price

Advice

Landlord and trade work in Burland

We work for landlords, letting agents and housing providers in Burland as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.