Cheshire East · England
Bath Re-enamelling for Burland homes
Bath re-enamelling in and around Burland: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A coating lifting around the plughole
- Worn patches where water runs and sits
What affects the price in Burland
Prices start from £350. There is no charge for travel to Burland. The price depends on:
- What kind of damage it is
- Previous DIY repairs that have to come out
- How easy the damage is to reach
- The material
Our prices are the same across the UK, with no extra for Burland. What changes the price is the job itself: the material, the amount of damage and how many items.
Quotes from your pictures
The better the photos, the more accurate the price. Here’s what we find most useful:
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
- What it’s made of, if you know
Most clients in Burland get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Bath re-enamelling at your home in Burland
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we do not cut corners on it. We work on cast iron baths, Victorian roll-tops and acrylic baths, and common reasons people get in touch are staining under the taps and around the waste and an original cast iron bath that needs restoring.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Burland (CW5)
- Region
- Cheshire East
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Also near Burland
More services for Burland
What we are called out for in Burland
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Keep an eye out for any of the following:
- Lots of chips and rust spots
- An old resurfacing that’s failing
- Stains that will not shift
- A bath in a colour that no longer suits
What your quote should include
- Whether cleaning and preparation are in the price
- How your room will be protected
- Whether the colour is mixed to match
- Who will actually do the work
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Burland and nearby
Burland is about 2 miles west of Nantwich, in Cheshire East. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We cover all 254 towns and villages in Cheshire East. You can also see our page for Liverpool, about 27 miles away.
Our visits in CW5 work the same way as everywhere else we cover. From Wrexham Road and Shores Lane or anywhere nearby, we can come to you. We also cover the places around Burland: Swanley (1 mile south), Burford (1 mile north-east), Acton (1 mile east), Stoneley Green (1 mile south) and Ravensmoor (2 miles south). Within a short drive, we also cover Crewe (5 miles east), Middlewich (9 miles north-east), Sandbach (10 miles north-east), Coppenhall (6 miles north-east), Holmes Chapel (12 miles north-east) and Leighton (5 miles north-east).
Local landmarks in Burland
Typical jobs here are in homes near Acton Church of England Primary Academy, St Mary's Church and Malbank School and Sixth Form College and the streets around them. Burland’s nearest station is Nantwich station, about 2.4 miles east. Nearby you’ll also find Nantwich Workhouse (2.2 miles east) and Nantwich Castle (2.1 miles east).
Keeping it looking good
Most damage we see is avoidable. A few tips:
- Don’t leave a chip unrepaired
- Do not use the bath until it has fully cured
- Do not let dyes or oils sit on the finish
- Keep toiletries on a shelf rather than in the bath
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale can’t build up.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Questions from Burland
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Does re-enamelling smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Do the materials smell?
Expect a mild smell while we’re working.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
Can I get a quote without a visit?
In nearly every case. If pictures do not show enough, we’ll ask for another angle.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
How long is the bath unusable?
One day for most baths, ready the following day. We give you timings with the quote.
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Repairing versus replacing in Burland
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Prices start from £350. A repair is priced on what needs doing, not where you live. You’ll see the full price before you book, with no extras added later.
Why book with us
- Nothing taken out or refitted
- Colours mixed by hand to suit your surface
- Typically one visit, start to finish
- We’ll tell you if it’s not worth repairing
Take a look at our prices page or guide to resurfacing and replacement costs.
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
What we do, step by step
Once we’re through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes the best part of a day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
Before we arrive
- Tell us if there are stairs or a lift
- Clear toiletries, mats and anything else from around the area
- Have somewhere for us to park nearby if possible
Getting a price
Send us a photo of the damage and one of the entire item, with your CW5 postcode, and we’ll come back with a fixed quote.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
