Cumbria · England

uPVC window & door repair in Crossgates, Cumbria

Our repair technicians come to Crossgates for scratch, chip, burn and hole repairs to uPVC windows, doors and sills. Nothing is taken out, and the work is guaranteed.

  • Repairs from £95
  • Holes from removed fittings and alarms
  • Damage during building work
Surface Doctor technician repairing a wooden kitchen worktop

Book uPVC repair in Crossgates

Repair or replace in Crossgates?

Replacing the frame or sill costs far more, and new uPVC may not match the weathered frames around it. Repairing the damage leaves the unit in place. Our uPVC repair starts from £95. A repair is priced on what needs doing, not your postcode. You’ll see the full price before you book.

Why Crossgates customers choose us

  • CHAS, Constructionline and SafeContractor accredited
  • We leave the room as we found it
  • Nothing taken out or refitted
  • Typically one visit, start to finish

See our prices page.

uPVC repair in Crossgates without replacing anything

We fill and refinish the damage to match the frame, including woodgrain finishes. Builders and developers use us for snagging repairs too. We work on window frames & sills, doors & door panels and coloured and woodgrain uPVC, and the jobs we see most are chips and dents and burns on sills.

A one-year guarantee comes with the work, just as it does everywhere we cover. Warm soapy water and a soft cloth are all it needs. Do not use solvents or scourers.

Damaged white panel edge repaired, before and after
Area
Crossgates (CA14)
Region
Cumbria
Warranty
12 months on all our work
Quote
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026

About Crossgates

Crossgates is about 6 miles south-east of Workington, in Cumbria. Jobs in Crossgates are booked in like any other job: a fixed quote from photos, then a visit to do the work. Crossgates is one of 438 places in Cumbria we cover. Our nearest city page is Newcastle upon Tyne, about 77 miles away.

Our visits in CA14 work the same way as everywhere else we cover. With the A5086 close by, Crossgates is simple for us to get to. Nearby, we also work in Asby (1 mile south-west), Kirkland (2 miles south), Rowrah (2 miles south-west), Arlecdon (2 miles south-west) and Winder (3 miles south-west). Within a short drive, we also cover Workington (6 miles north-west), Whitehaven (7 miles south-west), Maryport (10 miles north), Cockermouth (6 miles north-east), Keswick (12 miles east) and Moorclose (6 miles north-west).

Near you in Crossgates

Typical jobs here are in homes near Church of St Michael, among other places. Well-known places in the area include Hayes Castle (4.7 miles west). Green spaces nearby include Knock Murton and Loweswater.

Map of Crossgates © OpenStreetMap contributors

Common questions in Crossgates

Can a burnt window sill be fixed?

Yes. We fill and refinish the burnt area to match.

Is there a call-out fee?

Travel is included in the price, with the same prices everywhere we work.

What information do you need?

A close-up, a wider photo and your postcode. Then we’ll agree a date.

Is it safe with children and pets around?

Just keep them out of the work area. We will tell you when the room can be used again.

Can you repair several things at once?

Yes. Doing several items on one visit generally costs less than separate visits. Include photos of each item.

Is a repair better than a new one?

Typically, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we will say so.

Can you price it without visiting?

In nearly every case. We only ask to see it in person if the photos cannot show what we need.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time that suits you.

DIY kit or professional repair?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it fails, we can still put it right.

What we can’t put right

We’ll always be straight with you, so here’s what a repair can’t fix:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

Send us photos and we’ll tell you honestly.

Surfaces we repair

  • Coloured and woodgrain uPVC
  • Doors & door panels
  • Conservatory frames
  • Window frames & sills
  • White uPVC

Landlords, agents and businesses in Crossgates

We are used to working with agents and managing companies. Send the address, photos and access details and we will arrange it.

For anyone letting property in or around Crossgates, we can repair and quote for several addresses together. Send photos for each one and we’ll come back with a combined price.

Do you need uPVC repair in Crossgates?

uPVC is tough but not indestructible: ladders, tools and building work scratch and chip it, candles and cigarettes burn sills, and removed fittings leave holes.

The most common problems we’re called about are:

  • Scratches from ladders and furniture
  • Damage during building work
  • Holes from removed fittings and alarms
  • Burns on sills

What your quote should include

  • What protection goes down before work starts
  • Whether the price covers travel
  • Whether they match the colour on site
  • What happens if they find more damage

10 questions to ask before you book

How the visit works

A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and tidy away. Allow a few hours. Before we go, we will explain how long to leave it and how to care for it.

  1. We start by cleaning the frame.
  2. Scratches, chips and holes are filled.
  3. We smooth the repair.
  4. We colour-match the finish, including woodgrain effects.
  5. We blend the repair into the surrounding surface.

Before we arrive

  • Let the surface dry out before the visit
  • Let us know about parking or access
  • Tell us if there are stairs or a lift

How to get a price

There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

Get a fixed quote

Related advice

What uPVC repair costs

Prices start from £95. There is no area surcharge for Crossgates. The price reflects:

  • Whether it’s a chip, crack, burn or wear
  • The size and number of damaged areas
  • How many items we do on one visit
  • The material

Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Getting a price from photos

It only takes a minute to photograph the damage, and it saves a visit. Please include:

  • A close-up of the damage, in focus
  • The postcode, so we can plan the visit
  • Any earlier repairs or coatings
  • A coin beside the damage so we can judge size

If you are in Crossgates and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.