Cornwall · England
uPVC Repair for Cubert homes
Fixed-price uPVC repair in Cubert and the surrounding area, normally in one visit.
- Repairs from £95
- Scratches from ladders and furniture
- Holes from removed fittings and alarms
uPVC repair in Cubert without replacing anything
Builders and developers use us for snagging repairs too. We fill and refinish the damage so it blends into the frame, including woodgrain finishes. We work on window frames & sills, doors & door panels and conservatory frames, and the jobs we see most are holes from removed fittings and alarms and chips and dents.
A one-year guarantee comes as standard, so you are covered after the visit. Clean with warm soapy water and a soft cloth. Don’t use solvents or scourers.
- Area
- Cubert (TR8)
- County
- Cornwall
- Cover
- One year on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
About Cubert
Cubert is about 3 miles south-west of Newquay, in Cornwall. Across the TR8 area, we carry out the work at your property. Cubert is one of 644 places in Cornwall we cover.
Every address in TR8 is within our area. From Lanlovie Meadow, Ellenglaze Court and Chynowen Parc or a nearby road, we can come to you. Other places close to Cubert include Holywell (1 mile north-west), Trevowah (1 mile north), Reen Manor (2 miles south), Goonhavern (3 miles south) and Perranporth (3 miles south-west). We also work in nearby towns such as Truro (8 miles south), Newquay (3 miles north-east), St Austell (15 miles east), Camborne (14 miles south-west), Redruth (11 miles south-west) and Rosewarne (14 miles south-west).
Around Cubert
Our customers here include homes close to Church of St Cubert and Cubert School and the streets around them. Cubert’s nearest station is Newquay station, roughly 3 miles north-east. Well-known places in the area include Newquay Community Hospital (2.9 miles north-east) and Gallery Of Old Newquay (2.7 miles north-east).
Places near Cubert
More services for Cubert
What affects the price in Cubert
Repairs from £95. We give every job a fixed price from pictures. These are the things that affect it:
- Whether old repairs or coatings need taking off
- The size and number of damaged areas
- Doing more than one item at once
- Unusual colours or finishes
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Quotes from your photos
Almost every job we do is priced from pictures. This is what to send:
- Where you are, by postcode
- One picture of the entire window, door or sill
- One sharp close-up of the damage
- Natural light rather than flash
To get a price, send a couple of photos through our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Cubert: your questions answered
Do you cover Cubert?
Yes, we do. Repair technicians travel to Cubert from across the region, with no extra charge for travel.
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Do the materials smell?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
What happens next?
You get a fixed price and available dates. If we need another angle, we will ask.
What happens if you find more damage?
Your quote covers the damage in the pictures. If there is more, we’ll tell you before starting.
Signs you need uPVC repair in Cubert
uPVC is hard-wearing, but it does get damaged: ladders, tools and building work scratch and chip it, candles and cigarettes mark sills, and old fittings leave holes.
These are the problems we’re asked about most:
- Burns on sills
- Holes from removed fittings and alarms
- Scratches from ladders and furniture
- Chips and dents
Comparing quotes
- Is the price fixed, and does it include VAT?
- How long the guarantee is and what it covers
- How soon you can use it again
- Who will actually do the work
When a repair isn’t the answer
A repair isn’t right for every job, including:
- Failed or misted double glazing units
- Broken locks, hinges or mechanisms
- Frames that are warped or out of square
Send us pictures and we will tell you honestly.
Materials we repair
- Coloured and woodgrain uPVC
- White uPVC
- Doors & door panels
- Conservatory frames
- Window frames & sills
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Repair or replace: which is better?
A new window, door or sill costs far more, and new uPVC may not match the weathered frames around it. A repair keeps the original. Repairs from £95, with every job priced individually. The price reflects the work involved, not where you live. The full price is agreed before booking, with no extras added later.
Why choose Surface Doctor in Cubert
- Work done at your home or business
- A fixed quote before booking
- Everything repaired in place
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our pricing.
Landlord and trade work in Cubert
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
How the visit works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which typically takes a few hours. If we find something your pictures didn’t show, we will explain it before carrying on.
- We clean the frame or panel.
- Scratches, chips and holes are filled.
- We sand the repair smooth.
- We colour-match the finish, including woodgrain effects.
- The repair is blended into the surface around it.
Before we arrive
- Move bottles, mats and clutter away from the area
- Have a window or extractor fan available
- Let us know about parking or access
Get a quote
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
