Leicestershire · England
uPVC Repair for East Norton homes
Scratch, chip, burn and hole repairs to uPVC windows, doors and sills for homeowners, landlords and businesses in East Norton. Send photos for a free, fixed quote.
- Repairs from £95
- Damage during building work
- Chips and dents
Common problems we fix in East Norton
uPVC is tough but not indestructible: ladders, tools and building work scratch and chip it, candles and cigarettes burn sills, and old fittings leave holes.
The most common problems we are called about are:
- Damage during building work
- Burns on sills
- Chips and dents
- Scratches from ladders and furniture
What your quote should include
- Whether a trained technician does the job
- A fixed quote, and whether VAT is included
- How your room will be protected
- Whether they match the colour on site
How we handle uPVC repair in East Norton
The damage is filled and refinished so it blends into the frame, woodgrain finishes included. We also do snagging repairs for builders. Whether it’s holes from removed fittings and alarms and burns on sills, we can help.
Whatever the size of the job, you get the same one-year guarantee. Clean with warm soapy water and a soft cloth. Avoid solvents and abrasive cleaners.
- Area
- East Norton (LE7)
- County
- Leicestershire
- Cover
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
When a repair isn’t the answer
A few problems are outside what a surface repair can do:
- Failed or misted double glazing units
- Broken locks, hinges or mechanisms
- Frames that are warped or out of square
Send us photos and we will tell you honestly before you book.
Surfaces we repair
- Window frames & sills
- Coloured and woodgrain uPVC
- Doors & door panels
- Conservatory frames
- White uPVC
East Norton and the surrounding area
East Norton is about 7 miles south-west of Oakham, in Leicestershire. We travel to homes and businesses in East Norton, so nothing has to leave your home. East Norton is one of 287 towns and villages in Leicestershire where we work. Our jobs stretch from East Norton to Birmingham (about 45 miles away).
Our visits in LE7 are booked in the same way as anywhere else. We also travel to Keythorpe (1 mile west), Goadby (2 miles south-west), Hallaton (2 miles south), Blaston (3 miles south-east) and Glooston (4 miles south-west). Larger places within reach include Wigston (11 miles west), Melton Mowbray (12 miles north), Syston (12 miles north-west), Blaby (14 miles west), Sileby (14 miles north-west) and Mountsorrel (15 miles north-west).
What’s near East Norton
We visit homes around Launde Woods and Church of All Saints and the streets around them. Further afield, we also cover the area around Hallaton Museum (2.4 miles south) and Sauvey Castle (3 miles north). Open spaces near East Norton include King's Hill and Great Merrible Wood.
Landlords, agents and businesses in East Norton
We regularly work with letting and managing agents. Send the address, pictures and access details.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Prices and what affects them
Prices start from £95. We price every job individually, from your photos. The main factors are:
- Unusual colours or finishes
- How many items we do on one visit
- The material and finish
- How many areas need work
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
How to get a fixed quote
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- A coin beside the damage so we can judge size
- What it’s made of, if you know
- A clear, close picture of the problem area
- Good light, ideally daylight, without flash glare
The quickest way to a price is to send two or three pictures using our quote form or ring us. We will tell you honestly if a repair is the right fix.
Why repair rather than replace?
Replacing the frame or sill is a much bigger job, and new uPVC may not match the weathered frames around it. A repair keeps the original. Prices start from £95. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Why book with us
- We leave the room as we found it
- Every repair guaranteed for a year
- Most jobs done in one visit
- Same prices wherever you are
Take a look at our pricing.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
FAQs for East Norton
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before.
Do you work in East Norton?
We do. Repair technicians travel to East Norton from across the region, with no extra charge for travel.
Will there be a smell?
There may be a mild smell during the work that clears as it cures.
Can you match woodgrain uPVC?
Yes. We recreate the colour and grain by hand.
How soon can you come?
We will give you dates with your quote. Tell us if you need it done quickly.
Is repairing better than replacing?
Usually, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Can a burnt window sill be fixed?
Yes. We fill and refinish the burnt area to match.
What happens if you find more damage?
The price is fixed for what the pictures show. If there is more, we will tell you before starting.
Also in East Norton
The process
Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Plan for a few hours from start to finish. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- We clean the frame or panel.
- Next we fill the damage.
- We smooth the repair.
- The finish is colour matched, woodgrain included.
- We blend the repair into the surrounding surface.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Ensure the area is dry
- Open a window if you can
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the entire window, door or sill, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
