Gloucestershire · England
uPVC window & door repair in Elmore, Gloucestershire
We travel to Elmore for scratch, chip, burn and hole repairs to uPVC windows, doors and sills. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Burns on sills
- Chips and dents
About our uPVC repair in Elmore
We fill and refinish the damage so it blends into the frame, including woodgrain finishes. Builders and developers use us for snagging repairs too. Typical jobs include holes from removed fittings and alarms and burns on sills, in window frames & sills, doors & door panels and conservatory frames.
All our work is covered by a one-year guarantee, wherever you are in Gloucestershire. Warm soapy water and a soft cloth are all it needs. Do not use solvents or scourers.
- Location
- Elmore (GL2)
- Area hub
- Gloucestershire
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How we price uPVC repair
Prices start from £95. We charge the same across the UK, including Elmore. The price reflects:
- The material and finish
- Whether we combine several jobs
- How many areas need work
- Access to the area
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Send pictures for a quote
You can normally get a fixed quote without us visiting. To make it quick:
- Something in shot to show the size
- Daylight if possible, and no flash reflection
- One picture of the whole window, door or sill
- A close-up of the damage, in focus
Most customers in Elmore get their price from pictures. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
For landlords and businesses
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
We carry out planned and one-off repairs for housing associations and facilities teams in Gloucestershire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Repair or replace in Elmore?
Replacing the frame or sill is a much bigger job, and it may not match the rest after years of weathering. A repair leaves the unit in place. Prices start from £95. Compared with replacing, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why Elmore customers choose us
- We come to you, anywhere in the UK
- Generally one visit, start to finish
- Colours mixed by hand to suit your surface
- Honest advice, even when it means no job
Read our pricing.
When a repair is not the answer
To be straight with you, some problems need a different fix:
- Failed or misted double glazing units
- Broken locks, hinges or mechanisms
- Frames that are warped or out of square
Send us photos and we’ll tell you honestly before booking.
Surfaces we repair
- Window frames & sills
- Doors & door panels
- Conservatory frames
- White uPVC
- Coloured and woodgrain uPVC
Questions from Elmore
Which areas do you work in?
Across the UK. Prices don’t change with location.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Can you match woodgrain uPVC?
Yes. We recreate the colour and grain by hand.
What happens after I send photos?
We review the pictures and send a fixed quote.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and we’ll quote them together.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Gloucestershire.
How much does uPVC repair cost in Elmore?
Prices start from £95. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo with your GL2 postcode.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
How it works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes a few hours. We tidy up before we leave and let you know when you can use it again.
- We clean the frame or panel.
- We fill scratches, chips and holes.
- The repair is sanded smooth.
- We match the colour, including woodgrain finishes.
- We blend the repair into the surrounding surface.
Preparing for the visit
- Tell us about parking, stairs or access
- Ensure the room can be ventilated
- Keep children and pets away from the room on the day
Get a quote
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Related advice
Towns and villages near Elmore
What else we do in Elmore
Signs you need uPVC repair in Elmore
uPVC is hard-wearing, but it does get damaged: ladders, tools and building work scratch and chip it, candles and cigarettes burn sills, and removed fittings leave holes.
Most people contact us when they notice something like this:
- Holes from removed fittings and alarms
- Damage during building work
- Scratches from ladders and furniture
- Burns on sills
Before booking anyone
- How the colour is matched
- The length of the guarantee and what it covers
- Whether the price is fixed and includes VAT
- What protection goes down before work starts
Covering Elmore
Elmore is about 1 mile north-west of Quedgeley, in Gloucestershire. From the centre of Elmore to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover all 470 towns and villages in Gloucestershire. Our jobs stretch from Elmore to Birmingham (about 47 miles away).
All of GL2 is covered, from the main roads to the quietest streets. We also travel to Calcott's Green (1 mile north-west), Minsterworth (1 mile north), Oakle Street (2 miles north-west), Churcham (3 miles north-west) and Chaxhill (3 miles west). Further out, we also cover Cheltenham (10 miles north-east), Gloucester (3 miles east), Stroud (7 miles south-east), Tewkesbury (13 miles north-east), St Paul's (11 miles north-east) and Lansdown (11 miles north-east).
Near you in Elmore
Locally, our jobs take us to homes close to Severn Vale School and Meadowside Primary School, among other places. The closest station to Elmore is Gloucester station, roughly 3.5 miles north-east of the centre. Nearby you’ll also find Westgate Galleria (3.2 miles north-east) and Gloucester Waterways Museum (2.9 miles north-east). The countryside around Elmore includes Robinswood Hill and Highnam Woods.
About our accreditations · Every repair comes with a one-year guarantee.
