Gloucestershire · England
Bath Resealing in Elmore
We travel to Elmore for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, and the work is guaranteed.
- Leaks at the edges
- Gaps by the taps
- Gaps in the seal
Bath resealing at your home in Elmore
All of the old sealant is cut out, deal with any mould, and apply fresh mould-resistant silicone. We reseal baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. Common call-outs are for silicone smeared on tiles and unsealed corners, across wet rooms, shower trays & enclosures and baths.
Every repair comes with our one-year guarantee, wherever you are in Gloucestershire.
- Area
- Elmore (GL2)
- Area hub
- Gloucestershire
- Cover
- One year on every repair
- Quotes
- Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Your questions about bath resealing in Elmore
What happens next?
We check the damage, the material and your postcode, then reply with a quote with dates.
Can I get a quote without a visit?
Nearly always. If photos don’t show enough, we’ll ask for another angle.
How do I stop mould in sealant?
Usually poor ventilation and moisture sitting on the joint. We use mould-resistant silicone, and ventilation helps it last.
How long does a reseal take?
Normally a couple of hours, plus curing time.
How do I get a price for bath resealing in Elmore?
Every job gets a fixed quote from your photos. Send a close-up and a photo of the entire item and your postcode.
Can you repair several things at once?
Yes, and it’s often cheaper. Send pictures of everything together and you will get one combined price.
Can new silicone go over old?
No, we never seal over old silicone. The old sealant is cut out and the joint cleaned and dried.
Why does the silicone keep cracking?
Usually because the bath or tray moves. We seal baths full of water.
Honest limits
A few problems are outside what a surface repair can do:
- Movement in the bath or tray
- Very wide gaps that need a trim
- Water damage behind the bath that needs a builder
Send us photos and we will tell you honestly.
Materials we work on in Elmore
- Basins & vanity units
- Shower trays & enclosures
- Kitchen worktops & sinks
- Baths
- Wet rooms
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Looking after it afterwards
Nothing complicated is needed:
- Use the extractor fan
- Clean the sealant gently and regularly
- Reseal at the first sign of lifting
- Wipe the joints dry after use
Run the extractor fan, wipe the joints dry after use, and give them a regular clean with a mild cleaner to slow mould growth.
Black mould in sealant isn’t just unsightly; it shows moisture is getting in. An early reseal keeps water where it belongs.
Elmore and the surrounding area
Elmore is about 1 mile north-west of Quedgeley, in Gloucestershire. Whether you’re in the middle of Elmore or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Elmore is one of 470 towns and villages in Gloucestershire we cover. Our nearest city page is Birmingham, about 47 miles away.
Here we cover the GL2 postcode area. We also travel to Calcott's Green (1 mile north-west), Minsterworth (1 mile north), Oakle Street (2 miles north-west), Churcham (3 miles north-west) and Chaxhill (3 miles west). Larger places within reach include Cheltenham (10 miles north-east), Gloucester (3 miles east), Stroud (7 miles south-east), Tewkesbury (13 miles north-east), St Paul's (11 miles north-east) and Lansdown (11 miles north-east).
Landmarks near Elmore
Our customers here include homes close to Severn Vale School and Meadowside Primary School and the streets around them. The closest station to Elmore is Gloucester station, about 3.5 miles north-east. A little further out are Westgate Galleria (3.2 miles north-east) and Gloucester Waterways Museum (2.9 miles north-east). Not far away are Robinswood Hill and Highnam Woods.
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
For anyone letting property in or around Elmore, we’ll quote for several properties at once. Send pictures for each one and we’ll come back with a combined price.
Resealing in Elmore: why it matters
A reseal is one of the cheapest bathroom jobs there is. Failed sealant can lead to water damage that is much more expensive. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
What you get with us
- No extra charge for your area
- We will tell you if it’s not worth repairing
- Dust sheets down, tidy finish
- We come to you, anywhere in the UK
See our prices page.
What happens on the day
Here’s how a visit typically runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Allow about two hours for a bath from start to finish. Before we go, we’ll explain when it can be used and how to look after it.
- We cut out and remove all of the old sealant.
- We clean the joint and treat any mould.
- The joint is dried thoroughly.
- We fill a bath with water before sealing so the gap is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, taps included.
How to prepare
- Open a window if you can
- Plan for the room to be out of bounds to pets and children
- Let us know which floor the room is on
Getting a price
For a price in Elmore, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
When to call us in Elmore
Sealant splits when the bath or tray moves, often because it was sealed with the bath empty.
Typical reasons for a call-out include:
- Stained silicone
- Gaps by the taps
- Water getting behind the bath or tray
- An untidy old seal
What your quote should include
- When it can be used again
- How the room is protected while they work
- Whether the price covers travel
- Whether the colour is mixed to match
Materials and what they mean for the repair
Shower trays
Trays are sealed with weight on them, for the same reason.
Baths
Baths are resealed with water in them, to open the joint fully.
Towns and villages near Elmore
More services for Elmore
About our accreditations · Every repair comes with a one-year guarantee.
