Central Bedfordshire · England

uPVC window & door repair in Hatch, Central Bedfordshire

Scratch, chip, burn and hole repairs to uPVC windows, doors and sills for householders, landlords and businesses in Hatch. Free, fixed quotes from your photos.

  • Repairs from £95
  • Scratches from ladders and furniture
  • Burns on sills
Surface Doctor technician repairing a wooden kitchen worktop

Book uPVC repair in Hatch

How we price uPVC repair

Prices start from £95. We don’t charge extra for travel to Hatch. The price depends on:

  • Previous DIY repairs that have to come out
  • What kind of damage it is
  • The size and number of damaged areas
  • How many items we do on one visit

No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.

Send pictures for a quote

You can normally get a fixed quote without us visiting. To help us price it:

  • A coin beside the damage so we can judge size
  • Where you are, by postcode
  • Any earlier repairs or coatings
  • Daylight if possible, and no flash reflection

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole window, door or sill, we can price the job.

uPVC repair at your home in Hatch

We fill and refinish the damage so it blends into the frame, woodgrain finishes included. Builders and developers use us for snagging repairs too. We work on coloured and woodgrain uPVC, white uPVC and window frames & sills, and common reasons people contact us are burns on sills and damage during building work.

Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking. Warm soapy water and a soft cloth are all it needs. Avoid solvents and abrasive cleaners.

Area
Hatch (SG19)
County
Central Bedfordshire
Guarantee
12 months on all our work
Quotes
From £95. Free, fixed price from pictures
Call
0345 017 0787
Page updated
23 October 2026
White panel with a damaged edge, shown before and after repair

How it works

Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we’re doing. It typically takes a few hours, and you can get on with other things while we are there.

  1. We start by cleaning the frame.
  2. We fill scratches, chips and holes.
  3. We sand the repair smooth.
  4. The finish is colour matched, woodgrain included.
  5. Finally we blend it into the rest of the frame.

Getting ready for the visit

  • Move bottles, mats and clutter away from the area
  • Mention if the room is upstairs or in a flat
  • Keep pets and children out of the room while we work

Getting a price

We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.

Get a fixed quote

Related advice

Questions from Hatch

Is it messy?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

I rent my home. Can I book you?

Yes. Check with your landlord; we can send the quote to them too.

Can pets and children be at home?

On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.

Do you do work for letting agents?

Yes, often. We can quote for several properties together and work between tenancies.

Do the materials smell?

There can be some smell while we work, so we ventilate the room. It fades as everything cures.

Do you work in Hatch?

Yes, we do. Technicians travel to Hatch from across the region, and the price is the same as everywhere else.

What happens after I send pictures?

We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we will ask.

Do I need to be at home?

Yes. We need access to the room while we work, at a time we agree with you.

Should I try a DIY kit first?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

Honest limits

A repair isn’t always the answer, and we will tell you before we start. Repairs will not solve:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

Send us pictures and we’ll tell you honestly.

What we work on

  • Coloured and woodgrain uPVC
  • Conservatory frames
  • Doors & door panels
  • White uPVC
  • Window frames & sills

Landlords, agents and businesses in Hatch

Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.

We carry out planned and one-off repairs for housing associations and facilities teams in Central Bedfordshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

What we are called out for in Hatch

uPVC is hard-wearing, but it does get damaged: ladders, tools and building work scratch and chip it, candles and cigarettes burn sills, and old fittings leave holes.

Keep an eye out for these signs:

  • Burns on sills
  • Chips and dents
  • Scratches from ladders and furniture
  • Damage during building work

Before you book anyone

  • Whether a trained technician does the job
  • Aftercare advice
  • Whether there are any call-out or travel charges
  • How long the guarantee is and what it covers

10 questions to ask before you book

About Hatch

Hatch is about 3 miles north-west of Biggleswade, in Central Bedfordshire. Wherever you are in the SG19 postcode area, we come to you. We work in 121 places in Central Bedfordshire. You can also see our page for London, about 44 miles away.

Postcode districts we cover here: SG19. We also cover the places around Hatch: Thorncote Green (1 mile south-west), Northill (1 mile south-west), Moggerhanger (1 mile north-west), Chalton (2 miles north-west) and Blunham (2 miles north). We also work in nearby towns such as Biggleswade (3 miles south-east), Flitwick (11 miles south-west), Shefford (6 miles south), Ampthill (10 miles south-west), Lower Stondon (8 miles south) and Potton (4 miles east).

Landmarks near Hatch

Typical jobs here are in homes near The Crown Public House, Church of St Mary the Virgin and Sandy Secondary School and the streets around them. For rail, the closest station is Sandy station, about 1.4 miles east of the centre. Other landmarks nearby include Biggleswade Hospital (3 miles south-east) and Jordans Mill (3.5 miles south-east). Green spaces nearby include The Riddy.

Map of Hatch © OpenStreetMap contributors

Repairing versus replacing in Hatch

Replacing the frame or sill is a much bigger job, and it may not match the rest after years of weathering. Repairing the damage keeps the original. Repairs from £95, with every job priced individually. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.

Why choose Surface Doctor in Hatch

  • Every repair guaranteed for a year
  • CHAS and Constructionline accredited
  • Typically one visit, start to finish
  • Work done at your home or business

Take a look at our pricing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.