Kent · England

uPVC Repair in Hextable

Problem with your window, door or sill in Hextable? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.

  • Repairs from £95
  • Scratches from ladders and furniture
  • Holes from removed fittings and alarms
Surface Doctor technician repairing a wooden kitchen worktop

Need uPVC repair in Hextable?

uPVC repair in Hextable, done in place

The damage is filled and refinished to match the frame, including woodgrain finishes. We also do snagging repairs for builders. Typical jobs include scratches from ladders and furniture and holes from removed fittings and alarms, on doors & door panels, conservatory frames and white uPVC.

Your repair is guaranteed for a year, as with every job we do. Clean with warm soapy water and a soft cloth. Avoid solvents and abrasive cleaners.

Where
Hextable (BR8, DA2)
Region
Kent
Warranty
12 months on all our work
Quote
From £95. Fixed and free, based on pictures
Call
0345 017 0787
Page updated
23 October 2026
Damaged white panel edge repaired, before and after

For landlords and businesses

Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.

What uPVC repair costs

Repairs from £95. Every quote is fixed and free. What we look at:

  • How many areas need work
  • How easy the damage is to reach
  • The material and finish
  • The type of damage

Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.

Quotes from your photos

When you take your photos, these tips help us give you a firm price:

  • Daylight if possible, and no flash reflection
  • Details of any past repairs
  • A clear, close picture of the problem area
  • One picture of the whole window, door or sill

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.

Do you need uPVC repair in Hextable?

uPVC is hard-wearing, but it does get damaged: ladders, tools and building work scratch and chip it, candles and cigarettes burn sills, and removed fittings leave holes.

Look out for these signs:

  • Holes from removed fittings and alarms
  • Scratches from ladders and furniture
  • Burns on sills
  • Chips and dents

Comparing quotes

  • What the guarantee covers, and for how long
  • If travel is included in the price
  • What preparation is included
  • Whether a trained technician does the job

10 questions to ask before booking

Repairing versus replacing in Hextable

A new window, door or sill is a much bigger job, and new uPVC may not match the weathered frames around it. A repair leaves the unit in place. Prices start from £95. A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.

Why us?

  • We will tell you if it’s not worth repairing
  • Rooms protected and left tidy
  • Colours mixed by hand to suit your surface
  • One visit for most repairs

Take a look at our pricing.

What we cannot put right

A repair isn’t always the answer, and we would rather say so up front. Repairs won’t solve:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

Send us pictures and we’ll tell you honestly before you book.

What we work on

  • Conservatory frames
  • Doors & door panels
  • Coloured and woodgrain uPVC
  • Window frames & sills
  • White uPVC

DIY kit or professional repair?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.

Hextable and nearby

Hextable is about 3 miles south-west of Dartford, in Kent. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We cover 922 places across Kent. Our nearest city page is London, about 13 miles away.

All of BR8 and DA2 is covered. From Panter's, Southbank and Plantation Road or a nearby road, we can come to you. Being close to the B258, Hextable is simple for us to get to. If you’re just outside Hextable, we cover Puddledock (1 mile north-west), Swanley Village (1 mile south-east), Stonehill Green (1 mile west), Joyden's Wood (1 mile north-west) and Wilmington (1 mile north). Within a short drive, we also cover Dartford (3 miles north-east), Sevenoaks (9 miles south), Gravesend (9 miles east), Tonbridge (15 miles south), Northfleet (7 miles east) and Kings Hill (14 miles south-east).

Around Hextable

Our clients here include homes close to Hextable School, The Ship pub and St Peter. Also close by are Hextable Primary School (within half a mile north) and Dartford Heath (1.7 miles north). For rail, the closest station is Swanley station, roughly 1.5 miles south-west. Further afield, we also cover the area around Broadway Shopping Centre (3.4 miles north-west) and Dartford Library (2.6 miles north-east). Open spaces near Hextable include Wansunt Pit.

Map of Hextable © OpenStreetMap contributors

Hextable questions

Can I add another job to the visit?

Of course, and it usually saves money. Send pictures of everything together and you will get one combined price.

Do you cover the entire of Kent?

All of Kent, and the rest of the UK. There’s no extra charge for travel.

Do you work in Hextable?

Yes, we do. We send a technician to Hextable for every job, and the price is the same as everywhere else.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Can tenants book a repair?

Of course. Check with your landlord; we can send the quote to them too.

Can you match woodgrain uPVC?

Yes. Colour and grain are matched by hand.

Does someone need to be in?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

How soon can you come?

We’ll give you dates with your quote. Tell us if you need it done quickly.

How the visit works

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a few hours. We tidy up before we leave and let you know when you can use it again.

  1. We start by cleaning the frame.
  2. Scratches, chips and holes are filled.
  3. We sand the repair smooth.
  4. We colour-match the finish, including woodgrain effects.
  5. Finally we blend it into the rest of the frame.

Before we arrive

  • Keep children and pets away from the room on the day
  • Let the surface dry out before the visit
  • Tell us about parking, stairs or access

How to get a price

A quote takes minutes to ask for: photograph the damage, then the entire window, door or sill, include your postcode and send them over. You will get a fixed price, not an estimate.

Get a fixed price

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.