Greater London · England

uPVC window & door repair in Kenton, Greater London

Damaged window, door or sill in Kenton? We put it right where it is, mix the colour on the day and guarantee the work for a year.

  • Repairs from £95
  • Holes from removed fittings and alarms
  • Burns on sills
Surface Doctor technician repairing a wooden kitchen worktop

Trusted uPVC repair in Kenton

Kenton and the surrounding area

Kenton is about 2 miles south of Stanmore, in Greater London. Across the HA3 area, we come to you. Kenton is one of 764 towns and villages in Greater London where we work. Our nearest city page is London, about 11 miles away.

Our visits in HA3, HA7 and HA1 are booked in the same way as anywhere else. Jobs here include addresses on Retreat Close, Kenton Road and Woodgrange Avenue. With the A4006 close by, Kenton is easy for our technicians to reach. If you are just outside Kenton, we cover South Kenton (1 mile south), Northwick Park (1 mile south-west), Greenhill (1 mile west), Wealdstone (1 mile north-west) and Harrow on the Hill (2 miles south-west). We also work in nearby towns such as London (11 miles south-east), City of Westminster (8 miles south-east), Marylebone (8 miles south-east), Kensington (7 miles south-east), St Pancras (9 miles south-east) and Shoreditch (11 miles south-east).

What’s near Kenton

We visit homes around Uxendon Manor Primary School, Preston Park and The New Moon pub and the streets around them. Nearby too are St Gregory's Catholic Science College (under half a mile south-east) and Church of St Mary (within half a mile west). The nearest railway station is Kenton station, roughly 0.5 miles south-west of the centre. Nearby you will also find St. Anns (1.3 miles west) and Hilfield Castle (4.9 miles north). Green spaces nearby include Masons Field and Northala Fields.

Map of Kenton © OpenStreetMap contributors

About our uPVC repair in Kenton

The damage is filled and refinished so it blends into the frame, woodgrain finishes included. Builders and developers use us for snagging repairs too. Whether it’s burns on sills and holes from removed fittings and alarms, we can usually put it right, whatever the material.

All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back. Clean with warm soapy water and a soft cloth. Avoid solvents and abrasive cleaners.

Where
Kenton (HA3, HA7, HA1)
Region
Greater London
Cover
12 months on all our work
Quote
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Last updated
23 October 2026
Before and after: a chipped white edge filled and refinished

DIY repairs versus a professional job

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.

Questions from Kenton

Is a repair better than a new one?

Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.

Do you work in Kenton?

Yes. We work across the UK and come to Kenton. Send us photos for a fixed quote, or call 0345 017 0787.

What does uPVC repair cost?

Repairs from £95. We give a fixed quote from your pictures. Send a close-up of the damage and a wider photo with your HA3 postcode.

Can you price it without visiting?

In nearly every case. We only ask to see it in person if the pictures can’t show what we need.

Do I need to be at home?

Yes. We need access to the room while we work, at a time we agree with you.

Can you repair a burn on a uPVC sill?

Yes. We fill and refinish the burnt area to match.

Will there be a smell?

Expect a mild smell while we’re working that clears as it cures.

What happens if you find more damage?

We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.

The process

On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a morning or an afternoon. We tidy up before we leave and let you know when you can use it again.

  1. We clean the frame or panel.
  2. We fill scratches, chips and holes.
  3. We smooth the repair.
  4. We match the colour, including woodgrain finishes.
  5. We blend the repair into the surrounding surface.

Preparing for the visit

  • Let us know if it has been repaired before
  • Let the surface dry out before the visit
  • Point us to the nearest place to park

Get a quote

Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.

Get a free quote

Advice

What we cannot put right

A repair is not right for every job, including:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

Send us photos and we will tell you honestly before you book.

What we work on

  • Window frames & sills
  • Doors & door panels
  • White uPVC
  • Coloured and woodgrain uPVC
  • Conservatory frames

Why repair rather than replace?

Replacing the frame or sill is a much bigger job, and it may not match the rest after years of weathering. A repair leaves the unit in place. Repairs from £95, with every job priced individually. Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.

What you get with us

  • Rooms protected and left tidy
  • Free fixed quotes from pictures
  • We come to you, anywhere in the UK
  • No extra charge for your area

Take a look at our prices page.

What uPVC repair costs

Repairs from £95. There’s no area surcharge for Kenton. The price reflects:

  • The size and number of damaged areas
  • How many items we do on one visit
  • Any earlier repairs that need removing first
  • The material

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.

Getting a price from photos

Photographing the damage takes a minute, and it saves a visit. Try to send:

  • The postcode, so we can plan the visit
  • One picture of the entire window, door or sill
  • The material, if you know it
  • Any earlier repairs or coatings

There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.

What we are called out for in Kenton

uPVC is tough but not indestructible: ladders and building work leave scratches and chips, candles and cigarettes burn sills, and old fittings leave holes.

Keep an eye out for any of the following:

  • Holes from removed fittings and alarms
  • Burns on sills
  • Scratches from ladders and furniture
  • Chips and dents

Questions to ask before you book

  • Aftercare advice
  • What the guarantee covers, and for how long
  • What happens if they find more damage
  • Whether the price is fixed and includes VAT

Our hiring checklist

For landlords and businesses

Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.