Leicestershire · England

uPVC Repair for Kimcote homes

Problem with your window, door or sill in Kimcote? We put it right where it is, match it on site and guarantee the work for a year.

  • Repairs from £95
  • Damage during building work
  • Burns on sills
Surface Doctor technician repairing a wooden kitchen worktop

UPVC repair in Kimcote

uPVC repair in Kimcote without replacing anything

We fill and refinish the damage to match the frame, including woodgrain finishes. Builders and developers use us for snagging repairs too. Typical jobs include burns on sills and damage during building work, across window frames & sills, coloured and woodgrain uPVC and doors & door panels.

Every job is backed for twelve months in Kimcote and everywhere else. If something goes wrong with the work, we come back. Clean with warm soapy water and a soft cloth. Don’t use solvents or scourers.

Location
Kimcote (LE17)
Area hub
Leicestershire
Warranty
12 months on all our work
Quotes
From £95. Fixed and free, based on photos
Call
0345 017 0787
Updated
23 October 2026
Damaged white panel edge repaired, before and after

For landlords and businesses

For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.

We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we will handle the rest.

How we price uPVC repair

Repairs from £95. You will know the full cost before you book. We look at:

  • The material and finish
  • Whether we combine several jobs
  • Access to the area
  • The type of damage

Compared with replacing, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Send pictures for a quote

You can usually get a fixed quote without us visiting. To help us price it:

  • What it’s made of, if you know
  • Where you are, by postcode
  • One sharp close-up of the damage
  • Details of any past repairs

We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.

Kimcote questions

Is repairing better than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Which areas do you work in?

Everywhere in the UK, Kimcote included. Travel is included in the price.

Are you accredited?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Do you work in Kimcote?

Yes. We cover the whole UK and come to Kimcote and the rest of Leicestershire. Send photos and we’ll quote, or call 0345 017 0787.

What happens once I’ve sent photos?

You get a fixed quote and available dates. If we need another angle, we will ask.

Can you price it without visiting?

Yes, almost always. Clear photos let us give you a fixed quote without visiting.

Can you repair something that is been repaired before?

Yes, we frequently do. It can add a little time, which we include in the quote.

What we can’t put right

We’d rather lose a job than do one that won’t last, so here’s what a repair can’t put right:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

If in doubt, send pictures and we will say what we think.

Materials we work on in Kimcote

  • Window frames & sills
  • Doors & door panels
  • White uPVC
  • Coloured and woodgrain uPVC
  • Conservatory frames

The process

We work cleanly and quietly, so you can stay at home while we are there. Protection goes down first, then the job itself takes a few hours. At the end we talk you through the curing time and the aftercare.

  1. We clean the frame or panel.
  2. We fill scratches, chips and holes.
  3. The repair is sanded smooth.
  4. We colour-match the finish, including woodgrain effects.
  5. Finally we blend it into the rest of the frame.

Before we arrive

  • Clear toiletries, mats and anything else from around the area
  • Make sure the area is dry
  • Tell us if there are stairs or a lift

Ask for a price

Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and you are under no obligation.

Get a fixed quote

Read more

DIY kit or professional repair?

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

When to call us in Kimcote

uPVC is tough but not indestructible: ladders and building work leave scratches and chips, candles and cigarettes burn sills, and removed fittings leave holes.

Keep an eye out for these signs:

  • Scratches from ladders and furniture
  • Holes from removed fittings and alarms
  • Chips and dents
  • Damage during building work

Comparing quotes

  • What happens if the damage is worse than the pictures show
  • Whether a trained technician does the job
  • Is the price fixed, and does it include VAT?
  • Whether cleaning and preparation are in the price

Choosing a repair company

Why repair rather than replace?

A new window, door or sill costs far more, and it may not match the rest after years of weathering. Repairing the damage keeps the original. Prices start from £95. We charge the same wherever you are, with no extra for Kimcote. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why Kimcote clients choose us

  • Nothing taken out or refitted
  • Colours mixed by hand to suit your surface
  • No extra charge for your area
  • Free fixed quotes from pictures

See our prices page.

Kimcote and the surrounding area

Kimcote is about 8 miles south of Wigston, in Leicestershire. Anywhere in LE17, we carry out the work at your property. We work in all 287 towns and villages across Leicestershire, from the larger towns to small villages. You can also see our page for Birmingham, about 32 miles away.

Postcode districts we cover here: LE17. Jobs here include addresses on Walton Road, Poultney Lane and Gilmorton Road. We also travel to Walton (1 mile north-east), Gilmorton (1 mile north-west), Upper Bruntingthorpe (2 miles north-east), Walcote (2 miles south-west) and South Kilworth (3 miles south-east). Further out, we also cover Hinckley (11 miles north-west), Wigston (8 miles north), Lutterworth (3 miles west), Blaby (7 miles north), Broughton Astley (5 miles north-west) and Earl Shilton (10 miles north-west).

Landmarks near Kimcote

Typical jobs here are in homes near Church of All Saints and the streets around them. Nearby you will also find Lutterworth and District Museum (2.8 miles south-west).

Map of Kimcote © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.