Leicestershire · England
uPVC Repair for Kirby Bellars homes
uPVC repair in Kirby Bellars without the cost of replacing. Send us pictures for a fixed quote, then we come to you.
- Repairs from £95
- Chips and dents
- Damage during building work
uPVC repair in Kirby Bellars without replacing anything
We also do snagging repairs for builders. We fill and refinish the damage so it blends into the frame, including woodgrain finishes. Our repair technicians work on white uPVC, coloured and woodgrain uPVC and conservatory frames, and people most often call us about damage during building work and scratches from ladders and furniture.
You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking. Warm soapy water and a soft cloth are all it needs. Avoid solvents and abrasive cleaners.
- Location
- Kirby Bellars (LE14)
- Area hub
- Leicestershire
- Cover
- A year, on every repair
- Price
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How we price uPVC repair
Prices start from £95. We don’t charge extra for travel to Kirby Bellars. The price depends on:
- Whether we combine several jobs
- What the surface is made of
- Unusual colours or finishes
- What kind of damage it is
We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
Good pictures mean an accurate price. Here’s what helps:
- One picture of the entire window, door or sill
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
- A close-up of the damage, in focus
Most clients in Kirby Bellars get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
What a repair cannot fix
Before you book, it’s worth knowing the limits:
- Failed or misted double glazing units
- Broken locks, hinges or mechanisms
- Frames that are warped or out of square
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Window frames & sills
- White uPVC
- Coloured and woodgrain uPVC
- Conservatory frames
- Doors & door panels
When to call us in Kirby Bellars
uPVC is tough but not indestructible: ladders and building work leave scratches and chips, candles and cigarettes mark sills, and removed fittings leave holes.
The most common problems we’re called about are:
- Burns on sills
- Chips and dents
- Damage during building work
- Scratches from ladders and furniture
Questions to ask before you book
- Aftercare advice
- What prep work is covered
- Whether they match the colour on site
- What the guarantee covers, and for how long
Questions from Kirby Bellars
Do you repair coloured uPVC?
Yes. Colour and grain are matched by hand.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Can pets and children be at home?
Keep pets and children away from the work area on the day.
Which areas do you work in?
We cover the whole UK, including Kirby Bellars and the rest of Leicestershire. Send your postcode with your pictures and we’ll offer you dates.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Can you repair a burn on a uPVC sill?
Yes. The burn is filled and refinished to match.
Repairing versus replacing in Kirby Bellars
A new window, door or sill is a much bigger job, and new uPVC may not match the weathered frames around it. A repair leaves the unit in place. Prices start from £95. A repair is priced on what needs doing, not where you live. You’ll see the full price before you book.
Why Kirby Bellars customers choose us
- No need to remove anything
- Colour-matched on site
- CHAS and Constructionline accredited
- One price list for the whole UK
Read our prices page.
Landlord and trade work in Kirby Bellars
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Towns and villages near Kirby Bellars
What else we do in Kirby Bellars
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Kirby Bellars and the surrounding area
Kirby Bellars is about 2 miles south-west of Melton Mowbray, in Leicestershire. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. Our technicians cover 287 places across Leicestershire, from the larger towns to small villages. We work right across the region, from Kirby Bellars to Birmingham (about 44 miles away).
Our technicians cover all of the LE14 postcode area and the streets around it. Jobs here include addresses on Main Street, Main Road and Priory View and the roads around them. We also travel to Asfordby Hill (1 mile north-east), Asfordby (1 mile north-west), Frisby on the Wreake (1 mile west), Welby (2 miles north-east) and Saxelbye (2 miles north-west). Larger places within reach include Loughborough (12 miles west), Wigston (14 miles south-west), Shepshed (15 miles west), Syston (7 miles south-west), Shelthorpe (11 miles west) and Sileby (7 miles west).
Around Kirby Bellars
Our clients here include homes close to Church of St Peter, Long Field Academy and Flying Childers pub. For rail, the closest station is Melton Mowbray station, about 2.3 miles east. Further afield, we also cover the area around The Mount motte at Melton Mowbray (2 miles east). Open spaces near Kirby Bellars include Ankle Hill.
How it works
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Plan for a few hours from start to finish. Before we go, we will explain when it can be used and what to avoid for the first few days.
- We clean the frame or panel.
- Next we fill the damage.
- We sand the repair smooth.
- We colour-match the finish, including woodgrain effects.
- We blend the repair into the surrounding surface.
How to prepare
- Open a window if you can
- Avoid using the area for a few hours before we arrive
- Tell us if there are stairs or a lift
How to get a price
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
