Norfolk · England

uPVC Repair for Matlaske homes

Local uPVC repair for Matlaske: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Repairs from £95
  • Chips and dents
  • Holes from removed fittings and alarms
Surface Doctor technician repairing a wooden kitchen worktop

Need uPVC repair in Matlaske?

uPVC repair in Matlaske without replacing anything

Builders and developers use us for snagging repairs too. We fill and refinish the damage to match the frame, including woodgrain finishes. Whether it’s scratches from ladders and furniture and damage during building work, we can help, on doors & door panels, white uPVC and window frames & sills alike.

Your repair is guaranteed for a year, as with every job we do. Warm soapy water and a soft cloth are all it needs. Don’t use solvents or scourers.

Where
Matlaske (NR11)
Region
Norfolk
Cover
One year on every repair
Price
From £95. Free, fixed price from pictures
Phone
0345 017 0787
Updated
23 October 2026
Damaged white panel edge repaired, before and after

Repair or replace in Matlaske?

Replacing the frame or sill costs far more, and new uPVC may not match the weathered frames around it. Repairing the damage leaves the unit in place. Prices start from £95. Set against the cost of replacement, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Why choose Surface Doctor in Matlaske

  • Nothing taken out or refitted
  • Fixed prices from your photos
  • One price list for the entire UK
  • Honest advice, even when it means no job

Take a look at our full price list.

Landlords, agents and businesses in Matlaske

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.

Common problems we fix in Matlaske

uPVC is tough but not indestructible: ladders and building work leave scratches and chips, candles and cigarettes mark sills, and old fittings leave holes.

The most common problems we’re called about are:

  • Scratches from ladders and furniture
  • Burns on sills
  • Damage during building work
  • Holes from removed fittings and alarms

Before you book anyone

  • What happens if the damage is worse than the photos show
  • What aftercare is recommended
  • Whether there are any call-out or travel charges
  • Whether the colour is mixed to match

10 questions to ask before booking

What we can’t put right

In fairness, there are a few things a repair won’t fix:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

If in doubt, send pictures and we’ll say what we think before you book.

Materials we work on in Matlaske

  • Doors & door panels
  • Conservatory frames
  • Coloured and woodgrain uPVC
  • Window frames & sills
  • White uPVC

How we price uPVC repair

Prices start from £95. A fixed quote means you know the cost before you book. We look at:

  • The material
  • Whether it’s a chip, crack, burn or wear
  • Access to the area
  • Any earlier repairs that need removing first

Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access.

Send pictures for a quote

We price nearly every job from photos. This is what to send:

  • The material, if you know it
  • A close-up of the damage, in focus
  • Natural light rather than flash
  • Something in shot to show the size

For a price in Matlaske, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

About Matlaske

Matlaske is about 9 miles west of North Walsham, in Norfolk. Anywhere in NR11, we come to you. We work in all 797 towns and villages in Norfolk, from the larger towns to small villages.

Our visits in NR11 work the same way as everywhere else we cover. If you are just outside Matlaske, we cover Little Barningham (1 mile south-west), Plumstead (1 mile west), Baconsthorpe (2 miles north-west), Itteringham (2 miles south) and Hempstead (3 miles north-west). Further out, we also cover North Walsham (9 miles east), Sheringham (5 miles north), Taverham (13 miles south), Cromer (6 miles north-east), Fakenham (14 miles west) and Aylsham (6 miles south-east).

What’s near Matlaske

Our clients here include homes close to Church of St Peter, among other places. Nearby you’ll also find Bessingham Moat Yard (1.8 miles north-east). The countryside around Matlaske includes Beacon Hill.

Map of Matlaske © OpenStreetMap contributors

The process

From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes a few hours, and we finish with a tidy-up and a look at the finished work together.

  1. First the frame or panel is cleaned.
  2. Scratches, chips and holes are filled.
  3. We sand the repair smooth.
  4. The finish is colour matched, woodgrain included.
  5. Finally we blend it into the rest of the frame.

Before we arrive

  • Keep pets and children out of the room while we work
  • Let us know which floor the room is on
  • Make sure the room can be ventilated

Get a quote

Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and you are under no obligation.

Get a fixed quote

Related advice

DIY kit or professional repair?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.

FAQs for Matlaske

Can you do more than one item on the same visit?

Yes, and it’s frequently cheaper. Send pictures of everything together and you’ll get one combined price.

Can a burnt window sill be fixed?

Yes. The burn is filled and refinished to match.

Do you charge for travel?

No. Our quotes include travel, with the same prices everywhere we work.

Do you come to Matlaske?

Yes, we do. We send a technician to Matlaske for every job, and the price is the same as everywhere else.

What happens next?

We come back with a fixed quote, plus dates. There’s no obligation to book.

What happens if you find more damage?

The price is fixed for what the photos show. If there’s more, we’ll tell you before starting.

What areas do you cover?

We work UK-wide, and that includes Matlaske. Prices don’t change with location.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.