Norfolk · England
Bath Repair for Matlaske homes
We travel to Matlaske for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Scuffs and scratches in the surface
- A chip where the taps sit
What we can’t put right
A few problems are outside what a surface repair can do:
- Metal that has corroded all the way through
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Not sure? Send photos and we will give you a straight answer before you book.
Materials we work on in Matlaske
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
Bath repair in Matlaske without replacing anything
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, generally in a single visit. Whether it’s impact holes in acrylic and a kit repair that didn’t last, we can help, on roll-top & freestanding, pressed steel enamel and whirlpool & spa baths alike.
Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Location
- Matlaske (NR11)
- Area hub
- Norfolk
- Guarantee
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Matlaske
What else we do in Matlaske
How the visit works
You don’t need to empty the room. We bring everything we need with us, lay protective sheets and start once you are happy with the plan. Most jobs take a morning or an afternoon, and you can get on with other things while we’re there.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
Preparing for the visit
- Let us know about parking or access
- Plan for the room to be out of bounds to pets and children
- Mention if the room is upstairs or in a flat
Ask for a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Read more
Where we work around Matlaske
Matlaske is about 9 miles west of North Walsham, in Norfolk. Clients in Matlaske get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Matlaske is one of 797 towns and villages in Norfolk where we work.
We cover every part of NR11. Other places close to Matlaske include Little Barningham (1 mile south-west), Plumstead (1 mile west), Baconsthorpe (2 miles north-west), Itteringham (2 miles south) and Hempstead (3 miles north-west). Larger places within reach include North Walsham (9 miles east), Sheringham (5 miles north), Taverham (13 miles south), Cromer (6 miles north-east), Fakenham (14 miles west) and Aylsham (6 miles south-east).
Local landmarks in Matlaske
Our clients here include homes close to Church of St Peter. A little further out are Bessingham Moat Yard (1.8 miles north-east). Not far away are Beacon Hill.
Common problems we fix in Matlaske
Acrylic baths that crack nearly always have a support problem. Legs that aren’t adjusted, a missing cradle or a soft floor let the base flex until it cracks.
Common reasons people in Matlaske contact us are:
- Rust spots around the plughole
- Damage beneath the taps
- Impact holes in acrylic
- Chips on the rim or sides
What to look for in a quote
- How the room is protected while they work
- What preparation is included
- Is the price fixed, and does it include VAT?
- How long the guarantee is and what it covers
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Different materials, different repairs
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, just like other baths.
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We are used to working with agents and managing companies. Send the address, pictures and access details and we’ll arrange it.
FAQs for Matlaske
Can you repair a crack in an acrylic bath?
Frequently, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a picture.
I tried a repair kit. Can you fix it?
Regularly. We strip it out, deal with any rust and repair it again.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Do you repair coloured baths?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
What about rust by the waste?
Yes, very often. The rust is cut back to clean metal and sealed before we fill and finish it.
Which areas do you work in?
We work UK-wide. Prices don’t change with location.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Why repair rather than replace?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. A repair is priced on what needs doing, not your postcode. You will see the full price before you book.
Why choose Surface Doctor in Matlaske
- A year’s guarantee on all work
- Nothing taken out or refitted
- Colour mixed on the day to match
- Fixed prices from your pictures
See our pricing and guide to resurfacing and replacement costs.
Aftercare tips
Nothing complicated is needed:
- Stick to mild cleaners and a soft cloth
- Store metal items away from the bath
- Protect the bath with a towel when doing jobs nearby
- Don’t scrub with anything abrasive
Give the repair the full curing time we recommend before running a bath. After that, gentle cleaning keeps it looking good.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Take it off before we arrive.
About our accreditations · Every repair comes with a one-year guarantee.
