East Riding of Yorkshire · England
uPVC window & door repair in Melton, East Riding of Yorkshire
We travel to Melton for scratch, chip, burn and hole repairs to uPVC windows, doors and sills. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Chips and dents
- Scratches from ladders and furniture
Repair or replace: which is better?
A new window, door or sill costs far more, and new uPVC may not match the weathered frames around it. Repairing the damage leaves the unit in place. Prices start from £95. A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why choose Surface Doctor in Melton
- No extra charge for your area
- We leave the room as we found it
- Fixed prices from your photos
- Everything repaired in place
Take a look at our full price list.
uPVC repair in Melton without replacing anything
Builders and developers use us for snagging repairs too. We fill and refinish the damage so it blends into the frame, woodgrain finishes included. Typical jobs include holes from removed fittings and alarms and burns on sills, on conservatory frames, doors & door panels and white uPVC.
All our work comes with our one-year guarantee. Clean with warm soapy water and a soft cloth. Do not use solvents or scourers.
- Location
- Melton (HU14)
- Area hub
- East Riding of Yorkshire
- Cover
- One year on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Other services in Melton
What affects the price in Melton
Prices start from £95. There is no charge for travel to Melton. The price depends on:
- The colour and finish to match
- What the surface is made of
- Any earlier repairs that need removing first
- What kind of damage it is
We charge the same wherever you are, so there is no premium for Melton. What changes the price is the job itself: the material, the amount of damage and how many items.
Quotes from your pictures
Photographing the damage takes a minute. Try to send:
- A coin beside the damage so we can judge size
- Where you are, by postcode
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
Getting a quote takes a couple of minutes: photograph the damage, then the entire window, door or sill, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Melton and nearby
Melton is about 8 miles west of Kingston upon Hull, in East Riding of Yorkshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Our technicians cover all 299 towns and villages across East Riding of Yorkshire, from the larger towns to small villages. Our nearest city page is Leeds, about 42 miles away.
Postcode districts we cover here: HU14. From Redcliff Road, Melton Fields and Grange Close or anywhere nearby, a technician can come to you. Other places close to Melton include North Ferriby (1 mile east), Welton (1 mile north-west), Brough (1 mile west), Elloughton (2 miles north-west) and Brantingham (3 miles north-west). Larger places within reach include Beverley (9 miles north-east), Goole (14 miles west), Hessle (4 miles east), Cottingham (6 miles north-east), Market Weighton (11 miles north-west) and Hedon (14 miles east).
What’s near Melton
Around Melton, we work in homes near Welton Primary School, The Sandpiper pub and South Hunsley School and the streets around them. Melton’s nearest station is Ferriby station, roughly 0.9 miles south-east. Other landmarks nearby include Hull and East Riding Hospital (4 miles east) and Barton upon Humber Castle (4.6 miles south-east). Not far away are Far Ings National Nature Reserve.
Landlord and trade work in Melton
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
We’re used to working with agents and managing companies. Send the address, pictures and access details and we’ll arrange it.
When we’d advise against a repair
Not everything can be repaired, and we’d rather say so up front. Repairs will not solve:
- Failed or misted double glazing units
- Broken locks, hinges or mechanisms
- Frames that are warped or out of square
If in doubt, send photos and we will say what we think.
Materials we work on in Melton
- Coloured and woodgrain uPVC
- Doors & door panels
- Conservatory frames
- White uPVC
- Window frames & sills
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
FAQs for Melton
Can you quote from photos?
Typically, yes. A close-up and a wider photo are enough to give a fixed price.
Do you repair coloured uPVC?
Yes. Colour and grain are matched by hand.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can a burnt window sill be fixed?
Yes. We fill and refinish the burnt area to match.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Can you repair several things at once?
Yes. Doing several items on one visit normally costs less than separate visits. Include photos of each item.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
When to call us in Melton
uPVC is hard-wearing, but it does get damaged: ladders and building work leave scratches and chips, candles and cigarettes mark sills, and old fittings leave holes.
You may need us if you’ve spotted:
- Burns on sills
- Holes from removed fittings and alarms
- Chips and dents
- Damage during building work
What to look for in a quote
- How the room is protected while they work
- Whether a trained technician does the job
- Whether cleaning and preparation are in the price
- How changes to the job are handled
How the visit works
Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. Most jobs take a few hours, and you’re welcome to carry on with your day while we work.
- First the frame or panel is cleaned.
- Scratches, chips and holes are filled.
- The repair is sanded smooth.
- We match the colour, including woodgrain finishes.
- The repair is blended into the surface around it.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
- Point us to the nearest place to park
Get a quote
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
