East Riding of Yorkshire · England
Non-slip bath & shower coating in Melton, East Riding of Yorkshire
Local non-slip bath coating for Melton: photo quotes, tidy work and a year’s guarantee.
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
Your questions about non-slip bath coating in Melton
Can you price it without visiting?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Send pictures of everything together and we will quote them together.
What happens after I send photos?
We come back with a fixed price. There’s no obligation to book.
Is my repair covered?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Is repairing better than replacing?
Typically, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
How we handle non-slip bath coating in Melton
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. Typical jobs include a bath or tray that is slippery when wet and worn-out textured areas, on shower trays, enamelled baths and resurfaced baths.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Where
- Melton (HU14)
- Area hub
- East Riding of Yorkshire
- Guarantee
- 12 months on all our work
- Price
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Melton
Also in Melton
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us pictures and we will tell you honestly.
Materials we repair
- Enamelled baths
- Wet room floors (ask us)
- Acrylic baths
- Shower trays
- Resurfaced baths
Should you replace it?
The alternatives are a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A coating treats your existing bath or tray. Set against the cost of replacement, a repair is generally a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why us?
- Repair technicians who travel to you, UK-wide
- Every repair guaranteed for a year
- No need to remove anything
- Rooms protected and left tidy
Read our full price list.
Our work in Melton
Melton is about 8 miles west of Kingston upon Hull, in East Riding of Yorkshire. Whether you’re in the middle of Melton or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Melton is one of 299 places in East Riding of Yorkshire we cover. Our jobs stretch from Melton to Leeds (about 42 miles away).
We cover every part of HU14 and the streets around it. That includes homes on Redcliff Road, Melton Fields and Grange Close and the roads around them. Other places close to Melton include North Ferriby (1 mile east), Welton (1 mile north-west), Brough (1 mile west), Elloughton (2 miles north-west) and Brantingham (3 miles north-west). Within a short drive, we also cover Beverley (9 miles north-east), Goole (14 miles west), Hessle (4 miles east), Cottingham (6 miles north-east), Market Weighton (11 miles north-west) and Hedon (14 miles east).
Near you in Melton
Typical jobs here are in homes near Welton Primary School, The Sandpiper pub and South Hunsley School, among other places. Melton’s nearest station is Ferriby station, about 0.9 miles south-east of the centre. Further afield, we also cover the area around Hull and East Riding Hospital (4 miles east) and Barton upon Humber Castle (4.6 miles south-east). For a walk, there’s Far Ings National Nature Reserve.
Signs you need non-slip bath coating in Melton
Smooth surfaces are easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Send us a picture if you notice any of these:
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
Before you book anyone
- Whether cleaning and preparation are in the price
- Whether there are any call-out or travel charges
- How the colour is matched
- What happens if the damage is worse than the photos show
Landlords, agents and businesses in Melton
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will arrange it.
How we price non-slip bath coating
There are no hourly rates or hidden extras. The price is based on:
- The material
- Doing more than one item at once
- Unusual colours or finishes
- The type of damage
We charge the same wherever you are, with no extra for Melton. The job itself decides the price: how much damage, what it’s made of and how many items.
Getting a price from photos
We price nearly every job from photos. This is what we need:
- The postcode, so we can plan the visit
- Natural light rather than flash
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
Email us photos of the damage and a wider shot of the whole item, with your HU14 postcode, and we will come back with a fixed quote.
DIY repairs versus a professional job
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
The process
We turn up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes a few hours, and the room is left clean and tidy.
- We start by degreasing the area where you stand.
- Next we mask off the area.
- We apply the clear textured coating.
- We remove the masking for a neat edge.
- The coating is left to cure before use, typically overnight.
Before we arrive
- Keep pets and children out of the room while we work
- Tell us if there are stairs or a lift
- Mention any parking restrictions or tricky access
How to get a price
The quickest way to a price is to send a couple of photos through our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
