Kent · England
uPVC window & door repair in Mott's Mill, Kent
Damaged window, door or sill in Mott's Mill? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Scratches from ladders and furniture
- Holes from removed fittings and alarms
uPVC repair at your home in Mott's Mill
We fill and refinish the damage to match the frame, woodgrain finishes included. Builders and developers use us for snagging repairs too. We work on coloured and woodgrain uPVC, white uPVC and window frames & sills, and the jobs we see most are holes from removed fittings and alarms and chips and dents.
A one-year guarantee comes as standard. Warm soapy water and a soft cloth are all it needs. Avoid solvents and abrasive cleaners.
- Where
- Mott's Mill (TN3)
- Area hub
- Kent
- Warranty
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What a repair can’t fix
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Failed or misted double glazing units
- Broken locks, hinges or mechanisms
- Frames that are warped or out of square
Not sure? Send photos and we will give you a straight answer.
What we work on
- Window frames & sills
- White uPVC
- Coloured and woodgrain uPVC
- Conservatory frames
- Doors & door panels
Questions from Mott's Mill
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you repair a burn on a uPVC sill?
Yes. We fill and refinish the burnt area to match.
How quickly can you book me in?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
Will the price change on the day?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
What areas do you cover?
We work UK-wide, so Mott's Mill is covered. Our prices are the same everywhere.
It’s been repaired before. Can you still fix it?
Most of the time. Tell us what was done before and we will plan for it.
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
What happens on the day
You do not need to empty the room. Everything we use comes in the van with us, put protection down and get going once we have agreed what we are doing. Most jobs take a few hours, and you can get on with other things while we are there.
- We clean the frame or panel.
- Scratches, chips and holes are filled.
- We smooth the repair.
- We colour-match the finish, including woodgrain effects.
- Finally we blend it into the rest of the frame.
How to prepare
- Open a window if you can
- Mention any parking restrictions or tricky access
- Let us know which floor the room is on
Get a quote
The quickest way to a price is to send two or three pictures using our quote form or call us. We’ll say right away whether it can be repaired.
Advice
About Mott's Mill
Mott's Mill is about 3 miles north of Crowborough, in Kent. We agree a date that works for you, and we’ll give you an arrival time in advance, so there is no waiting around. We work in all 922 towns and villages across Kent, from the larger towns to small villages. Our jobs stretch from Mott's Mill to London (30 miles away).
Postcode districts we cover here: TN3. Close by, we cover Boarshead (2 miles south), Friar's Gate (2 miles south-west), Marden's Hill (2 miles south-west), Steel Cross (2 miles south) and Crowborough (3 miles south). Within a short drive, we also cover Sevenoaks (13 miles north), Royal Tunbridge Wells (5 miles north-east), Tonbridge (8 miles north-east), Paddock Wood (11 miles north-east), Southborough (6 miles north-east) and Edenbridge (9 miles north-west).
Near you in Mott's Mill
Typical jobs here are in homes near Church of St Thomas the Apostle and Groombridge St Thomas' Church of England Primary School, among other places. Mott's Mill’s nearest station is Eridge station, about 1.3 miles east of the centre. Further afield, we also cover the area around Crowborough War Memorial Hospital (3.2 miles south) and Bolebroke Castle (3.3 miles north-west). For a walk, there’s Broadwater Warren RSPB Reserve.
Landlord and trade work in Mott's Mill
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Prices and what affects them
Repairs from £95. We give every job a fixed quote from photos. This is what makes a difference:
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
- Unusual colours or finishes
- Any earlier repairs that need removing first
We charge the same wherever you are, with no extra for Mott's Mill. What changes the price is the job itself: the material, the amount of damage and how many items.
How to get a fixed price
Good photos mean an accurate price. Here’s what we find most useful:
- Something in shot to show the size
- The material, if you know it
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Repair or replace: which is better?
Replacing the frame or sill is a much bigger job, and it may not match the rest after years of weathering. Repairing the damage leaves the unit in place. Our uPVC repair starts from £95. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why book with us
- One-year guarantee on every repair
- One visit for most repairs
- Everything repaired in place
- Honest advice, even when it means no job
Take a look at our pricing.
When to call us in Mott's Mill
uPVC is hard-wearing, but it does get damaged: ladders and building work leave scratches and chips, candles and cigarettes mark sills, and removed fittings leave holes.
Typical reasons for a call-out include:
- Scratches from ladders and furniture
- Damage during building work
- Burns on sills
- Chips and dents
Comparing quotes
- What prep work is covered
- A fixed price, and whether VAT is included
- Whether they match the colour on site
- If travel is included in the price
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Nearby places to Mott's Mill
What else we do in Mott's Mill
About our accreditations · Every repair comes with a one-year guarantee.
