Pembrokeshire · Wales
uPVC Repair for Port Lion homes
Fixed-price uPVC repair in Port Lion and the surrounding area, usually in one visit.
- Repairs from £95
- Chips and dents
- Damage during building work
About our uPVC repair in Port Lion
The damage is filled and refinished to match the frame, including woodgrain finishes. Builders and developers use us for snagging repairs too. Whether it’s burns on sills and chips and dents, we can help.
Every job is backed for twelve months in Port Lion and everywhere else. If something goes wrong with the work, we come back. Clean with warm soapy water and a soft cloth. Avoid solvents and abrasive cleaners.
- Location
- Port Lion (SA62, SA73)
- Region
- Pembrokeshire
- Guarantee
- 12 months on all our work
- Price
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Our work in Port Lion
Port Lion is about 4 miles north of Pembroke Dock, in Pembrokeshire. Our repair technicians come to clients in Port Lion and nearby villages, so you don’t need to take anything anywhere. We cover 223 places in Pembrokeshire.
Our visits in SA62 and SA73 work the same way as everywhere else we cover. From New Wells Road, Butterhill and River View or anywhere nearby, we can come to you. Close by, we cover Foxhall (1 mile south-west), Llangwm (1 mile north), Newton Mountain (1 mile south-west), Hill Mountain (1 mile west) and Houghton (1 mile south-west). Further out, we also cover Haverfordwest (5 miles north-west), Milford Haven (5 miles west), Pembroke (4 miles south), Pembroke Dock (4 miles south), The Marsh (5 miles north-west) and Dinbych-y-Pysgod (10 miles south-east).
Local landmarks in Port Lion
We visit homes around The Cottage Inn, Church of Saint Jerome and Cleddau Reach VC School and the streets around them. The nearest railway station is Pembroke Dock station, roughly 3.3 miles south of the centre. A little further out are Benton Castle (1.4 miles south-east) and South Pembrokeshire Hospital (3.7 miles south-west). Green spaces nearby include Lawrenny Hill and Pembroke River lower.
Also near Port Lion
More services for Port Lion
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- Failed or misted double glazing units
- Broken locks, hinges or mechanisms
- Frames that are warped or out of square
Send us photos and we will tell you honestly before you book.
Materials we repair
- Doors & door panels
- Conservatory frames
- White uPVC
- Coloured and woodgrain uPVC
- Window frames & sills
Common questions in Port Lion
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
What if the damage is worse than the pictures show?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Can you repair something that is been repaired before?
In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.
Can pets and children be at home?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
What information do you need?
Photos of the damage, a photo of the whole window, door or sill and your postcode. Then we will agree a date.
What does uPVC repair cost?
Repairs from £95. We give a fixed quote based on pictures of the damage. Send a close-up and a photo of the entire item with your SA62 postcode.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
What uPVC repair costs
Prices start from £95. Quotes are free and the price is fixed. What we take into account:
- What kind of damage it is
- The size and number of damaged areas
- Any earlier repairs that need removing first
- The material and finish
A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Send pictures for a quote
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Your postcode, so we can check dates
- Whether it’s been repaired or coated before
- A clear, close picture of the problem area
- A picture taken from further back
Getting a quote takes a couple of minutes: photograph the damage, then the entire window, door or sill, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
What we do, step by step
We work cleanly and quietly, so you can stay at home while we are there. We protect the area first, then the work takes a few hours. Before we leave, we explain how soon it can be used and how to look after it.
- We clean the frame or panel.
- Next we fill the damage.
- The repair is sanded smooth.
- We colour-match the finish, including woodgrain effects.
- The repair is blended into the surface around it.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Point us to the nearest place to park
- Mention any parking restrictions or tricky access
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole window, door or sill, we can give you a fixed price without visiting.
Related advice
Repair or replace: which is better?
A new window, door or sill costs far more, and it may not match the rest after years of weathering. A repair keeps the original. Our uPVC repair starts from £95. The price reflects the work involved, not where you live. The full price is agreed before you book, with no extras added later.
Why book with us
- Every repair guaranteed for a year
- Fixed prices from your pictures
- Most jobs done in one visit
- Colour mixed on the day to match
Read our pricing.
For landlords and businesses
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
We carry out planned and one-off repairs for housing associations and facilities teams in Pembrokeshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Do you need uPVC repair in Port Lion?
uPVC is tough but not indestructible: ladders, tools and building work scratch and chip it, candles and cigarettes burn sills, and old fittings leave holes.
It’s worth getting a quote if you see:
- Holes from removed fittings and alarms
- Chips and dents
- Scratches from ladders and furniture
- Burns on sills
Before you book anyone
- Whether they match the colour on site
- Whether cleaning and preparation are in the price
- The length of the guarantee and what it covers
- How changes to the job are handled
About our accreditations · Every repair comes with a one-year guarantee.
