Pembrokeshire · Wales
Bath Re-enamelling in Port Lion
Damaged bath in Port Lion? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Chips and rust in more than one place
How we price bath re-enamelling
Prices start from £350. There is no area surcharge for Port Lion. The price reflects:
- Whether it’s a chip, crack, burn or wear
- What the surface is made of
- Any earlier repairs that need removing first
- The size and number of damaged areas
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Send pictures for a quote
A couple of clear pictures is all it takes. Try to include:
- A coin beside the damage so we can judge size
- What it’s made of, if you know
- Where you are, by postcode
- One sharp close-up of the damage
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed price back. Quotes are free and you are under no obligation.
About our bath re-enamelling in Port Lion
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the whole bath is tired rather than one spot. We regularly repair cast iron baths, Victorian roll-tops and acrylic baths, and common reasons people get in touch are a peeling or bubbling previous coating and a coloured bath you want in white.
All our work comes with our one-year guarantee.
- Area
- Port Lion (SA62, SA73)
- Region
- Pembrokeshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Your questions about bath re-enamelling in Port Lion
Is there any odour?
Expect a mild smell while we’re working that clears as it cures.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo with your SA62 postcode.
Can you price it without visiting?
Nearly always. If photos don’t show enough, we will ask for another angle.
How long is the bath unusable?
Usually one day, with the bath ready the following day. Deeply pitted baths may need a second day.
What if the damage is worse than the photos show?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Which areas do you work in?
We work UK-wide, and that includes Port Lion. Our prices are the same everywhere.
How it works
Visits start with a quick look at the job together, so you know exactly what we’re doing. Then the area is sheeted and masked and we start. It normally takes most of the day, and we’ll keep you posted as we go.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can normally be used the next day.
How to prepare
- Make sure the area is dry
- Plan for the room to be out of bounds to pets and children
- Tell us about any previous repairs or coatings
Getting a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. You will get a fixed price, not an estimate.
Related advice
When we would advise against a repair
It helps to know what we can’t do:
- A metal bath with a through crack
- Problems we can’t see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
Our work in Port Lion
Port Lion is about 4 miles north of Pembroke Dock, in Pembrokeshire. From the centre of Port Lion to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover all 223 towns and villages in Pembrokeshire, from the larger towns to small villages.
We cover every part of the SA62 and SA73 postcode area and the streets around it. You’ll find streets such as New Wells Road, Butterhill and River View. Nearby, we also work in Foxhall (1 mile south-west), Llangwm (1 mile north), Newton Mountain (1 mile south-west), Hill Mountain (1 mile west) and Houghton (1 mile south-west). Further out, we also cover Haverfordwest (5 miles north-west), Milford Haven (5 miles west), Pembroke (4 miles south), Pembroke Dock (4 miles south), The Marsh (5 miles north-west) and Dinbych-y-Pysgod (10 miles south-east).
Around Port Lion
Our customers here include homes close to The Cottage Inn, Church of Saint Jerome and Cleddau Reach VC School. The nearest railway station is Pembroke Dock station, about 3.3 miles south of the centre. Well-known places in the area include Benton Castle (1.4 miles south-east) and South Pembrokeshire Hospital (3.7 miles south-west). For a walk, there’s Lawrenny Hill and Pembroke River lower.
What we are called out for in Port Lion
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
Keep an eye out for any of the following:
- Thin, worn enamel in places
- An outdated colour you’d like to change
- Stains that won’t shift
- A period or roll-top bath worth keeping
Questions to ask before booking
- How your room will be protected
- How long the guarantee is and what it covers
- Aftercare advice
- Whether they match the colour on site
Keeping it looking good
Simple care helps the repair last. We recommend:
- Fix dripping taps quickly
- Wipe the bath dry after use in hard water areas
- Never use suction bath mats
- Don’t leave a chip unrepaired
A quick rinse and wipe after use helps, especially in hard water areas, so limescale can’t build up.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Work for landlords and builders
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Places near Port Lion
Also in Port Lion
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
About our accreditations · Every repair comes with a one-year guarantee.
