Kent · England

uPVC window & door repair in Ripple, Kent

Our repair technicians come to Ripple for scratch, chip, burn and hole repairs to uPVC windows, doors and sills. Everything is done in place, and the work is guaranteed.

  • Repairs from £95
  • Damage during building work
  • Chips and dents
Surface Doctor technician repairing a wooden kitchen worktop

Book uPVC repair in Ripple

Covering Ripple

Ripple is about 2 miles south-west of Deal, in Kent. Jobs in Ripple are booked in like any other job: a fixed quote from photos, then a visit to do the work. Ripple is one of 922 towns and villages in Kent where we work. We work right across the region, from Ripple to London (about 66 miles away).

Jobs in CT14 are booked in the same way as anywhere else. From Mongeham Road, Sunnyside Close and Sutton Lane or a nearby road, a technician can come to you. Neighbouring places we cover include Great Mongeham (1 mile north), Mill Hill (1 mile north-east), Northbourne (2 miles north-west), Sholden Meadows (2 miles north) and Sholden (2 miles north-east). Within a short drive, we also cover Canterbury (13 miles north-west), Margate (12 miles north), Dover (5 miles south-west), Folkestone (12 miles south-west), Ramsgate (10 miles north) and Broadstairs (12 miles north).

Landmarks near Ripple

Typical jobs here are in homes near Goodwin Academy, St Mary's Catholic Primary School and Church of St Mary the Virgin and the streets around them. The nearest railway station is Walmer station, about 1.1 miles east of the centre. Well-known places in the area include Royal Victoria Hospital (5.5 miles south-west) and Kent Museum of the Moving Image (2.4 miles north-east).

Map of Ripple © OpenStreetMap contributors

uPVC repair in Ripple, done in place

Builders and developers use us for snagging repairs too. We fill and refinish the damage so it blends into the frame, woodgrain finishes included. Our technicians work on white uPVC, window frames & sills and conservatory frames, and the jobs we see most are scratches from ladders and furniture and burns on sills.

Every repair comes with a one-year guarantee. Clean with warm soapy water and a soft cloth. Avoid solvents and abrasive cleaners.

White panel with a damaged edge, shown before and after repair
Location
Ripple (CT14)
Area hub
Kent
Guarantee
One year on every repair
Quote
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Updated
23 October 2026

What happens on the day

A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and clear up. Allow a few hours from start to finish. Before we go, we will explain how long to leave it and what to avoid for the first few days.

  1. First the frame or panel is cleaned.
  2. Scratches, chips and holes are filled.
  3. The repair is sanded smooth.
  4. The finish is colour matched, woodgrain included.
  5. Finally we blend it into the rest of the frame.

Preparing for the visit

  • Tell us if there are stairs or a lift
  • Plan for the room to be out of bounds to pets and children
  • Mention any parking restrictions or tricky access

Getting a price

Email us a photo of the damage and a wider shot of the entire item, with your CT14 postcode, and we’ll reply with a fixed price.

Send photos for a quote

Read more

What a repair can’t fix

It helps to know what we can’t do too:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

Not sure? Send photos and we’ll give you a straight answer before booking.

Materials we work on in Ripple

  • Window frames & sills
  • Coloured and woodgrain uPVC
  • White uPVC
  • Conservatory frames
  • Doors & door panels

Repair or replace in Ripple?

A new window, door or sill costs far more, and new uPVC may not match the weathered frames around it. A repair keeps the original. Prices start from £95. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Why book with us

  • Free fixed quotes from pictures
  • A year’s guarantee on all work
  • One visit for most repairs
  • Colour mixed on the day to match

See our full price list.

When to call us in Ripple

uPVC is hard-wearing, but it does get damaged: ladders and building work leave scratches and chips, candles and cigarettes mark sills, and removed fittings leave holes.

Typical reasons for a call-out include:

  • Chips and dents
  • Holes from removed fittings and alarms
  • Burns on sills
  • Damage during building work

Questions to ask before booking

  • Who will actually do the work
  • How changes to the job are handled
  • How the colour is matched
  • If travel is included in the price

How to compare quotes

Landlords, agents and businesses in Ripple

For anyone letting property in or around Ripple, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.

Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.

What uPVC repair costs

Repairs from £95. You will not pay by the hour. The price is based on:

  • The colour and finish to match
  • How much damage there is
  • The material and finish
  • Whether it’s a chip, crack, burn or wear

The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before you book.

Getting a price from photos

It only takes a minute to photograph the damage, and it saves a visit. Please include:

  • A coin or ruler next to the damage for scale
  • A picture taken from further back
  • Good light, ideally daylight, without flash glare
  • The material, if you know it

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

DIY repairs versus a professional job

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

If you are set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.

Ripple: your questions answered

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Will there be a smell?

There may be a mild smell during the work, which fades afterwards.

Can you price it without visiting?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

Is the work guaranteed?

Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.

What happens if you find more damage?

The price is fixed for what the photos show. Anything extra is discussed before we begin.

What happens once I’ve sent photos?

You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.

Are there extra charges for Ripple?

No. Our quotes include travel, and we charge the same wherever you are.

How quickly can you book me in?

That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.