Pembrokeshire · Wales

uPVC Repair in Stackpole

Scratch, chip, burn and hole repairs to uPVC windows, doors and sills for householders, landlords and businesses in Stackpole. Free, fixed quotes from your photos.

  • Repairs from £95
  • Damage during building work
  • Scratches from ladders and furniture
Surface Doctor technician repairing a wooden kitchen worktop

UPVC repair near Stackpole

How we price uPVC repair

Prices start from £95. A fixed quote means you know the cost before you book. We look at:

  • How hard the colour is to match
  • What kind of damage it is
  • What the surface is made of
  • How many areas need work

Compared with replacing, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.

How to get a fixed quote

It only takes a minute to photograph the damage. Try to send:

  • A coin beside the damage so we can judge size
  • A wider photo showing the whole window, door or sill
  • Any earlier repairs or coatings
  • A clear, close picture of the problem area

Upload photos of the damage and one of the entire item, with your SA71 postcode, and we’ll come back with a fixed quote.

uPVC repair in Stackpole without replacing anything

The damage is filled and refinished to match the frame, woodgrain finishes included. We also do snagging repairs for builders. Typical jobs include scratches from ladders and furniture and burns on sills, across conservatory frames, coloured and woodgrain uPVC and window frames & sills.

The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll sort it. Clean with warm soapy water and a soft cloth. Avoid solvents and abrasive cleaners.

White panel with a damaged edge, shown before and after repair
Location
Stackpole (SA71)
County
Pembrokeshire
Guarantee
12 months on all our work
Price
From £95. Free and fixed, from your photos
Phone
0345 017 0787
Page updated
23 October 2026

When we would advise against a repair

To be straight with you, there are a few things a repair will not fix:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

Send us pictures and we’ll tell you honestly.

Materials we work on in Stackpole

  • Coloured and woodgrain uPVC
  • Doors & door panels
  • Conservatory frames
  • Window frames & sills
  • White uPVC

Questions from Stackpole

Does someone need to be in?

Yes. We need access to the room while we work, at a time we agree with you.

Do you cover the entire of Pembrokeshire?

All of Pembrokeshire, and the rest of the UK. There is no extra charge for travel.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Is it OK to have pets in the house?

We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.

Can I add another job to the visit?

Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.

What happens if you find more damage?

Your quote covers the damage in the pictures. Anything extra is discussed before we begin.

Can tenants book a repair?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

Do you charge for travel?

No. Our quotes include travel, and we charge the same wherever you are.

Stackpole and the surrounding area

Stackpole is about 8 miles south-east of Milford Haven, in Pembrokeshire. We visit clients in Stackpole and nearby villages, so you do not need to take anything anywhere. Stackpole is one of 223 towns and villages in Pembrokeshire we cover.

Our technicians cover all of the SA71 postcode area. Close by, we cover Bosherston (2 miles south-west), St Twynnells (2 miles west), Merrion (3 miles west), Stackpole and Castlemartin (3 miles west) and Bowett (3 miles north-west). Further out, we also cover Haverfordwest (12 miles north), Milford Haven (8 miles north-west), Pembroke (3 miles north), Pembroke Dock (4 miles north), The Marsh (12 miles north) and Dinbych-y-Pysgod (9 miles east).

Around Stackpole

Typical jobs here are in homes near St. Elidyr's Church and The Stackpole Inn, among other places. Stackpole’s nearest station is Pembroke station, roughly 3 miles north of the centre. Well-known places in the area include Museum of The Home (3.2 miles north) and Pembroke Castle (3.3 miles north). Not far away are New Quay Stack and Stackpole Estate.

  • Other local spots include Pembroke: St Mary South (2.9 miles north)
Map of Stackpole © OpenStreetMap contributors

Work for landlords and builders

We carry out planned and one-off repairs for housing associations and facilities teams in Pembrokeshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.

What we’re called out for in Stackpole

uPVC is tough but not indestructible: ladders and building work leave scratches and chips, candles and cigarettes mark sills, and removed fittings leave holes.

Look out for any of the following:

  • Damage during building work
  • Chips and dents
  • Burns on sills
  • Holes from removed fittings and alarms

Comparing quotes

  • What happens if the damage is worse than the pictures show
  • Who will actually do the work
  • A fixed price, and whether VAT is included
  • How your room will be protected

How to compare quotes

Why repair rather than replace?

A new window, door or sill is a much bigger job, and it may not match the rest after years of weathering. A repair keeps the original. Our uPVC repair starts from £95. Our prices are the same across the UK, so there’s no premium for Stackpole. The job itself decides the price: how much damage, what it’s made of and how many items.

Why book with us

  • Everything repaired in place
  • One visit for most repairs
  • Work done at your home or business
  • Accredited with CHAS, Constructionline and SafeContractor

See our pricing.

The process

There is not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. Most visits take a morning or an afternoon.

  1. We clean the frame or panel.
  2. We fill scratches, chips and holes.
  3. We sand the repair smooth.
  4. We colour-match the finish, including woodgrain effects.
  5. We blend the repair into the surrounding surface.

Before we arrive

  • Tell us if there are stairs or a lift
  • Have a window or extractor fan available
  • Move bottles, mats and clutter away from the area

How to get a price

If you’re in Stackpole and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Send pictures for a quote

Read more

DIY kit or professional repair?

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.