Pembrokeshire · Wales

Non-Slip Bath Coating in Stackpole

We travel to Stackpole for clear non-slip coatings for baths and shower trays. Everything is done in place, and the work is guaranteed.

  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Stackpole

About our non-slip bath coating in Stackpole

The coating is clear and textured, so the bath looks much the same. It’s popular with older people, families and holiday lets. If you are dealing with resurfaced baths that are now too smooth and bath mats that harbour mould or get forgotten, we can usually put it right.

Whatever the size of the job, it’s backed by a one-year guarantee in Stackpole and across Pembrokeshire. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Before and after: an old shower tray refinished by Surface Doctor
Area
Stackpole (SA71)
County
Pembrokeshire
Guarantee
12 months on all our work
Price
Free and fixed, from your photos
Phone
0345 017 0787
Page updated
23 October 2026

Common questions in Stackpole

What if the damage is worse than the pictures show?

If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.

Will it make a mess?

No. The work area is masked and covered, and we take our waste away with us.

Will a non-slip coating change how my bath looks?

Only slightly: the treated area looks slightly matt.

Is it safe with children and pets around?

We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.

Do you come to Stackpole?

We do. We send a technician to Stackpole for every job, with no extra charge for travel.

What happens after I send pictures?

We check the damage, the material and your postcode, then reply with a quote and the next dates we have.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Do the materials smell?

Expect a mild smell while we are working, which fades afterwards.

Honest limits

Some problems need a builder, plumber or fitter rather than us:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we will tell you honestly.

Surfaces we repair

  • Wet room floors (ask us)
  • Enamelled baths
  • Resurfaced baths
  • Acrylic baths
  • Shower trays

Repairing versus replacing in Stackpole

The alternatives are replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why book with us

  • Straight answers about what a repair can do
  • No extra charge for your area
  • Rooms protected and left tidy
  • Everything repaired in place

Take a look at our pricing.

What non-slip bath coating costs

We give every job a fixed price from photos. These are the things that affect it:

  • How easy the damage is to reach
  • Any earlier repairs that need removing first
  • The material and finish
  • The type of damage

Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.

Quotes from your pictures

Photographing the damage takes a minute. Try to send:

  • The material, if you know it
  • A picture taken from further back
  • Your postcode, so we can check dates
  • Details of any past repairs

We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.

Covering Stackpole

Stackpole is about 8 miles south-east of Milford Haven, in Pembrokeshire. Whether you’re in the middle of Stackpole or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Stackpole is one of 223 places in Pembrokeshire where we work.

Every address in SA71 is within our area, from the main roads to the quietest streets. Nearby, we also work in Bosherston (2 miles south-west), St Twynnells (2 miles west), Merrion (3 miles west), Stackpole and Castlemartin (3 miles west) and Bowett (3 miles north-west). Larger places within reach include Haverfordwest (12 miles north), Milford Haven (8 miles north-west), Pembroke (3 miles north), Pembroke Dock (4 miles north), The Marsh (12 miles north) and Dinbych-y-Pysgod (9 miles east).

Near you in Stackpole

Around Stackpole, we work in homes near St. Elidyr's Church and The Stackpole Inn and the streets around them. The nearest railway station is Pembroke station, roughly 3 miles north. A little further out are Museum of The Home (3.2 miles north) and Pembroke Castle (3.3 miles north). Green spaces nearby include New Quay Stack and Stackpole Estate.

  • Local facilities include Pembroke: St Mary South (2.9 miles north)
Map of Stackpole © OpenStreetMap contributors

Landlord and trade work in Stackpole

Landlords, letting agents and housing providers in Stackpole use us as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.

Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.

Common problems we fix in Stackpole

Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

Most people get in touch after spotting something like this:

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • Safety for older or less mobile people

Questions to ask before you book

  • What happens if the damage is worse than the photos show
  • What prep work is covered
  • How long it needs to cure
  • Whether the price is fixed and includes VAT

Choosing a repair company

How the visit works

We agree an arrival time beforehand, so you know when to expect us. On site, it takes a morning or an afternoon. The room is left tidy.

  1. We start by degreasing the area where you stand.
  2. The area to be treated is masked out.
  3. We apply the clear textured coating.
  4. We lift the masking for a clean edge.
  5. Once it has cured, normally overnight, it’s ready.

Preparing for the visit

  • Keep a parking space free if you can
  • Make sure the room can be ventilated
  • Mention any earlier repairs or resurfacing

Getting a price

Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed price back. Quotes are free and you’re under no obligation.

Get a fixed quote

Advice

DIY kit or professional repair?

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.